FURNITUREBOX ADDISON LADDER User manual

ADDISON LADDER
SHELVES
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/addison
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
1 HOUR
BUILD MAXIMUM
CAPACITY 30Kg
TWO
PERSON

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clean, at, soft surface to avoid any bumps or scratches.
Lay all the shelves out upside down (holes facing up) in size order.
Attach xings as per diagram to each shelf.

www.furniturebox.co.uk
STEP 2
Attach shelves [1, 2, 3 and 4] to the 2x back legs [7].
Make sure the cam nuts and bolts attached in step 1 now face
downwards.
Connect the legs using 1 x washer [E] followed by 1 x bolt [D] on each
side of each shelf - 8 in total. Tighten with Allen key [F].
Double check you’ve selected the correct legs - back legs [7] have
straight holes, front legs [8] have angled holes.

Follow us on Instagram
@furniturebox_uk
STEP 3
Attach 2x front legs [8] to the
shelves using 1 x washer [E]
followed by 1 x bolt [D] on each
side of each shelf - 8 in total.
Tighten with Allen key [F].
STEP 4
Attach the top shelf [5] to frame
using 4 x washers [E] + bolts [D] and
tighten with Allen key.

www.furniturebox.co.uk
STEP 5
Carefully turn unit around and attach 4 x back panels [6]. Use 1 x
washer [E] followed by 1 x bolt [D] on each side of each shelf - 8 in
total. Tighten with Allen key [F].
Also insert 2 x large cam nuts [A] into each back piece and twist with
Allen key [F] to secure.
Add 4 x feet [G] to the bottom of the legs.
Check stability. Your new shelves are complete. We strongly advise
using the anti-tipping kit provided to secure your shelves to the wall.
See overleaf.

Follow us on Instagram
@furniturebox_uk
Anti Tipping Kit Instructions
Warning: Unxed furniture may tip over. We strongly
advise you use the anti-tipping kit provided to secure
your shelves to the wall. Please use appropriate xings for
your wall and get professional advice if unsure.
Fixings -
STEP 1
Fasten 1x xing block [A] onto the
corre sponding position of the wall
with the bulge tube [C] and
core [D]

STEP 4
Your shelves are now secured to
the wall to prevent tipping.
STEP 2
Fasten a second xing block
[A] at the corresponding
position on the back of the
shelving top plate with
screws [E]
www.furniturebox.co.uk
STEP 3
Loop the strap [B] through both
xing blocks [A] - on the wall
and on the back of the shelves.
Then lock both ends of the
xing strip [B] tight.

WHAT THE GUARANTEE COVERS
 
e.g. lose metal threads
 
e.g. bonding/glue

e.g. legs bending

 •
 
..
 
 
 
 


e.g. the frame of the
product
ACTIVATE YOUR GUARANTEE ONLINE
scan this QR code with your phone to read
the full guarantee on line and register your
product. It only takes a moment to fill out.
Or visit: furniturebox.co.uour-guarantee