FURNITUREBOX PORTO SET User manual

PORTO SET
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/portosofa
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
1 HOUR
BUILD TABLE
MAXIMUM
CAPACITY 35Kg
TWO
PERSON
GLASS

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clear, at, soft
surface to avoid bumps
or scratches. Lay all your
components and xings
out. Note: we recommend
you don’t fully tighten
any of the bolts until
everything is fully
assembled.
First, assemble your chairs.
Attach 1x right arm [C1], 1x
left arm [C2] and 1x seat
backrest [D] to 1x chair
seat [E]. Use 8x washers [J]
+ bolts [I] around the seat
base.
STEP 2
Flip chair onto its
feet. Use another 2x
washers [J] + bolts [I]
higher up to secure
the arms to the
backrest. Each chair
uses 10 x washers +
bolts in total.
Once all bolts are in
place, fully tighten
with Allen key [K],
check stability and
add seat cushion [L].
Repeat for the 2nd
chair.

www.furniturebox.co.uk
STEP 3
Assemble the table.
Connect 2x table legs [G]
with 2x table side panels
[F] using 2x washers [J] +
bolts [I] at each leg - 8 in
total. Once all bolts are in
place, fully tighten with
Allen key [K].
STEP 4
Carefully, and with help, ip
the table onto its feet and
check stability. Carefully
lower glass tabletop [H]
onto table frame.

Follow us on Instagram
@furniturebox_uk
STEP 5
Assemble the sofa.
Connect right arm
[C1] and left arm
[C2] to sofa seat [B]
and sofa backrest
[A] using 8x
washers [J] + bolts
[I] around the seat
base.
STEP 6
Carefully, and with help, ip the sofa on to its feet. Use another
2x washers [J] + bolts [I] higher up to secure the arms to the sofa
backrest. The sofa uses 10 x washers + bolts in total. Fully tighten all
bolts using Allen key [K]. Check stability and add sofa cushion [B].
Your sofa, chairs
and table set is now
ready to use!