FURNITUREBOX LUGANO User manual

LUGANO ROUND
TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/lugano-round
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 2
Carefully slide the leg piece
[2] over the rods. Add a foot
piece (C) and secure using
nuts (B). Tighten the nuts
with tool (D), and repeat the
process for each leg.
STEP 1
Carefully insert the threaded rods
(A) into the holes in the underside of
the table-top [1] as shown.
ATTENTION: Take notice of the
entry angle and take care not to
over-screw beyond the rod’s thread
stoppers.

www.furniturebox.co.uk
STEP 3
Once all xings are fully tightened,
ask somebody to assist you with
turning the table over to complete
assembly. Your table is now ready
for you to use and enjoy.
FULL ASSEMBLY INSTRUCTIONS