FURNITUREBOX SELINA ROUND User manual

SELINA ROUND
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips, advice
and assembly video or visit
furniturebox.co.uk/club/selina-round
SCAN ME

• Check you have all the components and
tools listed.
• Remove all fttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
45 MINUTE
BUILD
GLASS MAXIMUM
CAPACITY 100Kg

Follow us on Instagram
@furniturebox_uk
STEP 2
Put the legs [2] onto the rods and nuts.
Connect the legs together in the middle using the triangular
connecting plate [D] and the 3 x long screws [A]
ATTENTION: Be careful not to fully tighten xings yet.
STEP 1
Use a clear, at, soft surface to
avoid bumps or scratches.
Place table top [1] on at surface
with metal discs facing upwards.
Screw rods [B] into metal discs.
Screw nut [E] onto rods.

STEP 3
Ensure all the screws are
correctly tightened to hold each
leg to the connecting plate.
www.furniturebox.co.uk
STEP 5
ATTENTION: With the
help of another person,
carefully turn the
table over to complete
assembly. Your table is
now ready to use.
FULL ASSEMBLY INSTRUCTIONS
STEP 4
Next, insert tods [C] into
holes on the table legs at the
table-top-end, and tighten
to ensure legs are properly
xed to table top.
Now go back and fully
tighten all screws and bolts
including at the triangular
connecting plate [D]

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.