GE Tetra Series User manual

• Supports Tetra miniMAX, Tetra MAX, Tetra PowerMAX,
Tetra PowerStrip and Tetra miniStrip LED lighting systems
• Class 2 wiring per NEC Article 725 (SELV)
• IP66 rated: wet location rated
• M20 Thread
(GEPS12W-60M)
Tetra® LED Systems Power Supply
12
Volt
GE
Lighting Solutions
Installation Guide
imagination at work
Power Supply Features
Power Supply Installation
1
Power supply
Conduit
Power supply
input wires
AC Line
Run AC line through conduit and
attach conduit to outdoor-rated
enclosure. Attach power supply to
enclosure.
3
Brown (-)
Blue (+)
Connect the AC line to the brown
(line) and blue (neutral) input wires of
the power supply using 18-14 AWG
(0.82-2.08 mm2) twist-on wire
connectors. Properly ground (green
wire with yellow stripe) power supply
in accordance with National Electric
Code (NEC) Article 600.
Connect the red stripe wire (+) of the
LED strip to the red wire (+) of the
power supply. Connect the white
wire (-) of the LED strip to the black
wire (-) of the power supply.
2
To power supply
Red (+)
Red stripe (+)
White (-) Black (-)
NOTE: All electrical connections
should be made within the letter.
RISK OF ELECTRIC SHOCK:
• Disconnect power at fuse box or circuit breaker before servicing or
installing product.
• Properly ground Tetra® power supply.
RISK OF FIRE:
• Use only approved wire for input/output connection.
Minimum size 18 AWG (0.82 mm2)
• Follow all local codes.
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation électrique à la boîte de fusibles ou au
disjoncteur avant l’entretien ou l’installation du produit.
• Assurez-vous de correctement mettre à terre l’alimentation
électrique Tetra®.
RISQUES D’INCENDIE
• N’utilisez que des ls approuvés pour les entrées/sorties de
connexion. Taille minimum 18 AWG (0.82 mm2).
• Respectez tous les codes locaux.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING/AVERTISSEMENT
Green with
yellow stripe

NOTE: Properly ground the power supply
and sign in accordance with all local
codes.
NOTE: When installing power supply,
connect to the appropriate sized building
breaker or disconnect device for line and
neutral connections, in accordance with
local, state or country regulations.
SIGN098-R012412
Power Supply Specications
4Mount power supply in a horizontal
orientation with a minimum of one
screw per mounting plate (two
screws per power supply).
5Tighten liquid-tight ttings and
properly replace cover on junction
box to ensure a water-tight seal.
Conforms to the following standards:
Supports
Tetra Products SKUs
Maximum Load
per Power Supply
Remote Mounting Distance
18 AWG/
0.82 mm2
16 AWG/
1.31 mm2
14 AWG/
2.08 mm2
12 AWG/
3.31 mm2
Tetra miniMAX GEWHMMTS8, GEWWMMTS8-50K,
GEWWMMTS8-41K, GEWWMMTS8 150 modules/60 ft. (18.29 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
GEBLMMS5, GEGLMMS5,
GERDMMS5 90 modules/36 ft. (10.97 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
Tetra MAX GEWHMXTS6, GEWWMXTS6-50K,
GEWWMXTS6-41K, GEWWMXTS6 120 modules/60 ft. (18.29 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
GEWHMHTS6, GEWWMHTS6-50K,
GEWWMHTS6-41K, GEWWMHTS6 80 modules/40 ft. (12.20 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
GEBLMXWA5, GEGLMXWA5,
GERDMXWA5 135 modules/54 ft. (16.46 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
GERCMXWA6, GEYGMXS6 162 modules/54 ft. (16.46 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
GERCMXWL6 160 modules/80 ft. (24.38 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
GERDMXWL6 140 modules/70 ft. (21.34 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
Tetra PowerMAX GEWHPMTL5, GEWWPMTL5-50K,
GEWWPMTL5-41K, GEWWPMTL5 38 modules/25 ft. (7.62 m) 30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m 120 ft./36.6 m
Tetra PowerStrip GEWHSSPS3, GEWWSSPS3-50K,
GEWWSSPS3-41K, GEWWSSPS3 16 modules/17 ft. (5.18 m) 20 ft./6.1 m 25 ft./7.6 m 35 ft./10.6 m 40 ft./12.1 m
Tetra miniStrip GEWHBSP3, GEWWBSP3-50K,
GEWWBSP3-41K, GEWWBSP3 53 modules/53ft. (16.16m) 20 ft./6.1 m 25 ft./7.6 m 35 ft./10.6 m 40 ft./12.1 m
*Maximum case temperature is 80°C
Performance Data Min Typical Max
Input Voltage (VAC) 90 100-240 264
Input Frequency (Hz) - 50/60 -
Input Current (A) - - 0.85
Output Voltage (VDC) 11.4 12.0 12.6
Output Current (ADC) 0.8 - 5.0
Output Power (W) - - 60
Environmental Operating Temperature Range -40°C +25°C +60°C*
Environmental Humidity (non-condensing) 0% - 95%
Environmental Storage Temperature Range -40°C - +85°C
Environmental Rating IP66 rated: wet location rated
Dimensions 12 in. x 2 in. x 1.25 in. (307 mm x 52 mm x 32 mm)
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Tetra is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.