Goldmedal 2343 User manual

Film-Tech
The information contained in this Adobe Acrobat pdf
file is provided at your own risk and good judgment.
These manuals are designed to facilitate the
exchange of information related to cinema
projection and film handling, with no warranties nor
obligations from the authors, for qualified field
service engineers.
If you are not a qualified technician, please make no
adjustments to anything you may read about in these
Adobe manual downloads.
www.film-tech.com

Part No. 39406
Revised May 2002
DROP IN POPCORN
WARMERS
Instruction Manual
Model #2343, 2344, 2345, 2343EXJ, 2344EXJ

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
2
Safety Precautions

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
3
INSTALLATION
CHECKING SHIPMENT
Unpack the shipping crate and check thoroughly for any damage which may have occurred in
transit. Any claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Voltage for your warmer is 120 Volt, 60 Cycle, single phase. The Popcorn Warmer Model #2343 and #2344
draw less amperage than the Model #2345. The #2343 and #2344 have one 475 Watt element, but the
#2345 has two 475 Watt elements. Your electrician must furnish sufficient current for the proper operation
of your machine. We recommend that this machine be fused on a line by itself. The switches and controls
which operate the warmer are located on the lower left (2343, 2344) or the bottom right (2345) of the
machine.
NOTE: Failure to wire properly will void the warranty and can result in damage to the blower, heat element,
lights, etc.
Japanese Models 2343EXJ and 2344EXJ:
Voltage for these models is 100v, 50/60Hz.

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
4
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
LEFT ON/OFF SWITCH
Flipping this switch to the "ON" position energizes the light, the left circulation fan and sends energy to the
left heat control (Models 2343, 2344, 2345).
RIGHT ON/OFF SWITCH
Flipping this switch to the "ON" position energizes the right circulation fan and sends energy to the right
heat control (Model 2345).
HEAT CONTROL
The machine comes with either (1) variable heat control (2343 and 2344) or (2) variable heat controls
(2345). These controls are marked OFF to 160 degrees. The left heat control operates the left heat
element (2343, 2344, 2345) and the right heat control operated the right heat element (2345). A 190
degree high limit thermostat is in each control cabinet.
CARE AND CLEANING
The stainless steel body of the Warmer is easy to keep clean. Usually a damp cloth will remove all dirt and
grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean
and sparkling. Remember the inside of the glass must be cleaned too. Periodically, empty out all the
popcorn and remove the drawer and clean the inside of the machine. A damp cloth will usually pick up all
scraps of popcorn that have been spilled. Empty the old maid drawer and wipe clean.

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
5
MAINTENANCE INSTRUCTIONS

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
6
ORDERING SPARE PARTS
1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2. When ordering, please include part number, part name, and quantity desired.
3. Please include your model name and machine serial number (located on the machine nameplate) with
your order.
4. Address all parts orders to:
Jarco Industries
order toll free 800-458-7578
or order online at www.concessionstands.com

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
7
PARTS LIST
Japanese Models:
All models use 2 heat elements wired in parallel. The light ballast is designed for 100 v 50/60 Hz.
Model Model
#2343EXJ #2344EXJ
Item No. Part No. Part No. Description Quantity
1 74720EX 74720EX Heat Element 2
2 48712 48712 Ballast 1
Model Model Model
#2343 #2344 #2345
Item No. Part No. Part No. Part No. Description
1 22038 22038 22038 Lead in cord *
2 39256 39256 39256 Cold air return
3 39258 39258 39258 Hanger Cover
4 39259 39259 39259 Standoff
5 39432 39432 39432 Right Door Slide *
6 39433 39433 39433 Left Door Slide
7 39271 39271 39271 Control Box Cover
8 39296 39296 39296 Left Control Box Weldment (White Nylon)
9 39297 Right Control Box Weldment *
10 39316 39316 39316 Front Glass Retainer Clip *
11 39317 39317 39317 Corn Tray
12 39318 39318 Center Corn Tray *
13 39382 39291 39292 Light Cover
14 39383 39293 39294 Light Shield
15 39386 39304 39305 Light Weldment
16 39384 39298 39299 Drawer Weldment
17 39385 39300 39301 Door Weldment
18 39390 39312 39313 Top Glass
19 39391 39314 39315 Front Glass
20 41020 41020 41020 Light Tube Holder *
21 41021 41021 41021 Light Tube Starter Holder *
22 42798 42798 42798 Lighted Rocker Switch
23 47385 47385 47385 Thermostat Warmer
24 74720 74720 74720 Heat Element
25 87429 87429 87429 Heat Control
26 87430 87430 87430 Knob Heat Control
27 41057 39016 41507 Light Tube
28 41022 41022 41509 Ballast *
29 40721 40721 40721 Fan
30 41023 41023 41508 Starter *
* Not Shown

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
8
OUTSIDE ASSEMBLY
1626
22
6
17
25

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
9
INSIDE ASSEMBLY
2
27
18
13
11
19 14

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
10
ELECTRICAL ASSEMBLY
23
12
8
29
24

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
11
ELECTRICAL SCHEMATIC
This wiring diagram for Models 2343 and 2344

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
12
ELECTRICAL SCHEMATIC
This wiring diagram for Model 2345.

Drop In Popcorn Warmers
All Domestic Models and 2343EXJ/2344EXJ
13
ELECTRICAL SCHEMATIC
This wiring diagram for Models 2343EXJ and 2344EXJ.