Goldmedal 2343EX User manual

Part No. 39407
Revised January 2000

  

Instruction Manual
Model #2343EX, 2344EX,AND 2345EX

2
SAFETY PRECAUTIONS

3
2343EX, 2344EX & 2345EX DROP IN WARMERS
INSTALLATION
FORWARD
This manual covers the model # 2343EX, 2344EX and 2345EX Drop In Pop Corn Warmers.
You can be very proud of your Drop In Warmer. In addition to being an attractive "eye catcher", it
contains various engineering innovations which make it the leader in the industry. The exterior of
the machine is designed and built-up to present an attractive appearance for many years.
DROP IN WARMER
INSTALLATION
CHECKING SHIPMENT
Unpack the shipping crate and check thoroughly for any damage which may have occurred in
transit. Any claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Voltage for your warmer is 120 Volt, 60 Cycle, single phase. The Corn Treat Center will draw a
maximum of 15 amps. Your electrician must furnish sufficient current for the proper operation of
your machine. We recommend that this machine be fused on a line by itself. The switches and
controls which operate the warmer are located on the lower left (2343EX, 2344EX) or the bottom
right (2345EX) of the machine.
NOTE: These instructions apply to all machines manufactured after 4/1/1975 and supercedes any
sticker or wiring instructions you may have received. Failure to wire properly will void the warranty
and can result in damage to the blower, heat element, lights, etc.
2343EX, 2344EX & 2345EX DROP IN WARMER

4
DROP IN WARMER
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
LEFT ON/OFF SWITCH
Flipping this switch to the "ON" position energizes the light, the left circulation fan and sends energy
to the left heat control (Models 2343EX, 2344EX, 2345EX).
RIGHT ON/OFF SWITCH
Flipping this switch to the "ON" position energizes the , the right circulation fan and sends energy to
the right heat control (Model 2345EX).
HEAT CONTROL
The machine comes with either (1) variable heat control (2343EX and 2344EX) or (2) variable heat
controls (2345EX). These controls are marked OFF to 160 degrees. The left heat control operates
the left heat element (2343EX, 2344EX, 2345EX) and the right heat control operated the right heat
element (2345EX). A 190 degree high limit thermostat is in each control cabinet.
CARE AND CLEANING
The stainless steel body of the Warmer is easy to keep clean. Usually a damp cloth will remove all
dirt and grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should
always be clean and sparkling. Remember the inside of the glass must be cleaned too.
Periodically, empty out all the popcorn and remove the drawer and clean the inside of the machine.
A damp cloth will usually pick up all scraps of popcorn that have been spilled. Empty the old maid
drawer and wipe clean.
2343EX, 2345EX and 2345EX DROP IN WARMER

5
MAINTENANCE INSTRUCTIONS
ORDERING SPARE PARTS
1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2. When ordering, please include part number, part name, and quantity desired.
3. Please include your model name and machine serial number (located on the machine
nameplate) with your order.
1. Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
[phone]
Fax: [phone]
2343EX, 234EX and 2345EX DROP IN WARMER

6
PARTS LIST – DROP IN WARMER
Model# 2343EX 2344EX 2345EX
Part Part Part
No. No. No. Description Quantity
42369 42369 42369 Lead in cord 1
39256 39256 39256 Cold air return 2
39258 39258 39258 Hanger Cover 2
39258 39259 39259 Standoff 4
39269 39269 39269 Right Door Slide 1
39270 39270 39270 Left Door Slide 1
39271 39271 39271 Control Box Cover 1
39271 39271 39271 Control Box Cover 2
39296 39296 39296 Left Control Box Weldment 1
39297 Right Control Box Weldment 1
39316 39316 39316 Glass Retainer
2
39317 End Corn Tray 1
39317 39317 End Corn Tray 2
39318 39318 Center Corn Tray 1
39376 30” Wire Cover 1
39379 36” Wire Cover 1
39380 48” Wire Cover 1
39382 30” Light Cover 1
39391 36” Light Cover 1
39392 48” Light Cover 1
39383 30” Light Shield 1
39293 36” Light Shield 1
39394 48” Light Shield 1
39386 30” Light Weldment 1
39304 36” Light Weldment 1
39305 48” Light Weldment 1
39384 30” Drawer Weldment 1
39298 36” Drawer Weldment 1
39295 48” Drawer Weldment 1
39385 30” Door Weldment 1
39300 36” Door Weldment 1
39301 48” Door Weldment 1
39398 30” Main Body Weldment 1
39310 36” Main Body Weldment 1
39311 48” Main Body Weldment 1
39390 30” Top Glass 1
39312 36” Top Glass 1
48” Top Glass 1
2343EX, 2344EX and 2345EX DROP IN WARMER

7
PARTS LIST – DROP IN WARMER CONTINUED
Model# 2343EX 2344EX 2345EX
Part Part Part
No. No. No. Description Quantity
39391 30” Front Glass 1
39314 36” Front Glass 1
39315 48” Front Glass 1
41020 41020 41020 Light Tube Holder 1
41021 41021 41021 Light Tube Starter Holder 1
42798 42798 Lighted Rocker Switch 1
42798 Lighted Rocker Switch 2
47385 47385 Thermostat Warmer 1
47385 Thermostat Warmer 1
74720EX 74720EX Heat Element 1
74720EX Heat Element 2
87429 87429 Heat Control 1
87429 Heat Control 2
87430 87430 Knob Heat Control 1
87430 Knob Heat Control 1
41057 Light Tube 1
39016 Light Tube 1
41507 Light Tube 1
41722 41722 Ballast 1
41510 Ballast 1
41023 41023 Starter 1
41508 Starter 1
2343EX, 2344EX AND 2345EX DROP IN WARMER

8
This is for Models 2343EX AND 2344EX
2343EX, 2344EX and 2345EX DROP IN WARMER

9
FOR MODEL 2345EX
2343EX, 2344EX AND 2345EX DROP IN WARMERS

10
WARRANTY
WE WARRANT to the original purchaser the Gold Medal equipment sold by us to
be free from defects in material or workmanship under normal use and service. Our
obligation under this warranty shall be limited to the repair or replacement of any
defective part for a period of six (6) months from the date of sale to the Original
Purchaser with regard to labor and one (1) year with regard to parts and does not
cover damage to the equipment caused by accident, alteration, improper use,
voltage, abuse, or failure to follow instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR
PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON
THE FACE HEREOF. We neither assume, nor authorize any other person
to assume for us, any other obligation or liability in connection with the sale of said
GOLD MEDAL equipment or any part thereof.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that
person, firm, association, or corporation who was billed by the GOLD MEDAL
PRODUCTS COMPANY, or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT 1-800-
543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIP-MENT
PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING
THE REPAIR OR REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.