Goldmedal 8324 User manual

Part No. 88198
Revised January 2004
Roller Grill Bun
Cabinet Combo
Instruction Manual
Model #8324, #8324SL, #8323,
#8323SL, #8423, #8424
Model #8423
Model #8324

SAFETY PRECAUTIONS

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
2
FORWARD
This manual covers the model ROLLER GRILL BUN CABINET COMBOS.
You can be very proud of your ROLLERGRILL / BUNCABINET COMBO. In addition to being an attractive
"eye catcher", it contains various engineering innovations which make it the leader in the industry. The
exterior of the machine is designed and built-up to present an attractive appearance for many years.
INSTALLATION
CHECKING SHIPMENT
Unpack the shipping crate and check thoroughly for any damage which may have occurred in
transit. Any claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Voltage for your warmer is 120 Volt, 60 Cycle, single phase. The Wattage and Voltage requirements are
indicated on the name plate. Use a grounded 120 V.A.C. circuit. We recommend that the machine be
fused on a line by itself.
NOTE: These instructions apply to all machines manufactured after 4/1/1975 and supercedes any sticker or
wiring instructions you may have received. Failure to wire properly will void the warranty and can result in
damage to the blower, heat element, lights, etc.

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
3
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
ON/OFF SWITCH
Flipping this switch to the "ON" position energizes the motor that turns the rollers. This switch can be used
alone or with the heat turned on.
HEAT CONTROL
Turning this control counter-clockwise increases the amount of heat to the rollers.
THERE ARE TWO SETS OF THESE CONTROLS, ONE FOR EACH SET OF ROLLERS
CARE AND CLEANING
The stainless steel body of the grill is easy to keep clean. Usually a damp cloth will remove all dirt and
grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean
and sparkling. Remember the inside of the glass must be cleaned too.

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
4
MAINTENANCE INSTRUCTIONS

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
5
ORDERING SPARE PARTS
1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2. When ordering, please include part number, part name, and quantity desired.
3. Please include your model name and machine serial number (located on the machine nameplate) with
your order.
4. Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
[phone]
Fax: [phone]
E-mail: [email protected]

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
6
PARTS LIST
Item No Part No Part No Part No Part No Part No Part No Description
1 87933 87933 88171 88171 87933 87933 Outer Chain Guard
2 87934 87934 88172 88172 87934 87934 Inner Chain Guard
3 88224 88224 88169 88169 88224 88224 Mounting Bracket Assebmly
4 87900 87900 88167 88167 87900 87900 Element Support
5 88194 88194 88166 88166 88194 88194 Insulator Board
6 87898 87898 88165 88165 87898 87898 Conductor Plate
7 88142 88184 88185 88377 88142 88184 Bottom Plate
8 87606 87646 88164 88363 87606 87646 Drip Pan
9 88103 88103 88103 88103 88103 88103 Control Panel Sticker
10 87376 88123 88123 87376 87376 88123 Heat Element
11 88149 88149 88300 88300 88149 88149 End Cover
12 87531 87531 87531 87531 87531 87531 Drive Motor CW
13 87532 87532 87532 87532 87532 87532 Drive Motor CCW
14 42532 42532 42532 42532 42532 42532 DSPT Rocker Switch
15 22038 22038 22038 22038 22038 22038 Lead In Cord
16 87589 87589 87589 87589 87589 87589 Teflon Bearings
17 87297 87297 87297 87297 87297 87297 Heat Control
18 87353 87353 87353 87353 87353 87353 Drive Sprocket
19 88231 88232 88232 88231 88231 88232 Roller Assembly
20 87511 87511 87511 87511 87511 87511 O-Rings
21 ~~~ ~~~ 88192 88192 87591 87591 Upper Drive Chain
22 ~~~ ~~~ 88191 88191 87590 87590 Lower Drive Chain
87591 87591 ~~~ ~~~ ~~~ ~~~ Drive Chain
23
88228
88228
~~~ ~~~
88228
88228
Outer Retainer
24 88229 88229 ~~~ ~~~ 88229 88229 Inner Retainer
25 77521 77521 ~~~ ~~~ 77521 77521 8-32 x 3/4 Slot HX HD
26 87988 87988 ~~~ ~~~ 87988 87988 Idler Sprocket
27 8000 8000 8000 8000 8000 8000 1" Dial Thermometer
28 38389 38389 38389 38389 38389 38389 Knob, Control
29 87044 87044 87044 87044 87044 87044 Master Link
30 87595 87595 88170 88170 87595 87595 Mounting Bracket
31 87594 87594 87594 87594 87594 87594 Motor Plate
32 88145 88177 88178 88376 88145 88177 Body Weldment (Bun Cabinet)
33 88139 88183 88183 88143 88139 88183 Door (Bun Cabinet)
34 87125 88193 88193 88146 87125 88193 Pivot Pin (Bun Cabinet)
35 88138 88179 88179 88378 88138 88179 Drawer (Bun Cabinet)
36 88151 88187 88187 88187 88151 88187 Drawer Slide (Bun Cabinet)
37 88152 88152 88186 88186 88152 88152 Drawer Slide Bracket
38 47120 47120 47120 47120 47120 47120 Knob, Lid Lift
39 47155 47155 47155 47155 47155 47155 Rubber Feet-3/4" High

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
7
ROLLER GRILL BUN CABINET ASSEMBLY
Model #8324
33
17,
28
38
39
19
14

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
8
ROLLER GRILL BUN CABINET ASSEMBLY
Model #8423
17,
28
19
33
38
14
39

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
9
WIRING DIAGRAM
Models #8324, #8324SL, #8323, #8323SL

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
10
WIRING DIAGRAM
Models #8423, #8424

Roller Grill Bun Cabinet Combo
All Models #8324, #8324SL, #8323, #8323SL, #8423, #8424
11
WARRANTY
WE WARRANT to the original purchaser the Gold Medal equipment sold by us to
be free from defects in material or workmanship under normal use and service. Our
obligation under this warranty shall be limited to the repair or replacement of any
defective part for a period of six (6) months from the date of sale to the Original
Purchaser with regard to labor and two (2) years with regard to parts and does not
cover damage to the equipment caused by accident, alteration, improper use, voltage,
abuse, or failure to follow instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR
PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION
ON THE FACE HEREOF. We neither assume, nor authorize any other person
to assume for us, any other obligation or liability in connection with the sale of said
GOLD MEDAL equipment or any part thereof.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that
person, firm, association, or corporation who was billed by the GOLD MEDAL
PRODUCTS COMPANY, or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT 1-800-
543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE
EQUIPMENT
PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING
THE REPAIR OR REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
GOLD MEDAL PRODUCTS COMPANY
10700 Medallion Drive
Cincinnati, Ohio 45241-4807 USA