Goldmedal 2551 User manual

© 2020 Gold Medal Products Co.
Part No. 49793
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
Titan 6 oz. Popper
Model No. 2551
Instruction Manual

Titan 6 oz. Popper Model No. 2551
Page 2
gmpopcorn.com
Table of Contents
SAFETY PRECAUTIONS ...................................................................................................................................3
INSTALLATION INSTRUCTIONS ...................................................................................................................5
Inspection of Shipment .......................................................................................................................................5
Manual .......................................................................................................................................................................5
Items Included with this Unit ...........................................................................................................................5
Setup...........................................................................................................................................................................6
Electrical Requirements .....................................................................................................................................7
Before You Plug In Machine ..............................................................................................................................7
OPERATING INSTRUCTIONS .........................................................................................................................8
Controls and Their Functions...........................................................................................................................8
Popping Corn Instructions .......................................................................................................................9
Care and Cleaning .................................................................................................................................... 10
Troubleshooting....................................................................................................................................... 12
AGITATOR SET COLLAR ADJUSTMENT................................................................................................... 13
MAINTENANCE INSTRUCTIONS ................................................................................................................ 14
ORDERING SPARE PARTS............................................................................................................................ 15
Replacing Broken Glass.................................................................................................................................... 16
6 oz. Kettle Assembly (56000) – Agitator Assembly View ...................................................................17
6 oz. Kettle Assembly (56000) – Kettle Bottom Assembly................................................................... 18
Cabinet Exterior – Front View....................................................................................................................... 19
Door Hardware Kits – Individual Component Breakdown................................................................20
Cabinet Interior – Controls View..................................................................................................................21
Cabinet Bottom – Corn Pan Element View ...............................................................................................22
Safety Labels.........................................................................................................................................................23
Accessories ........................................................................................................................................................... 23
Wiring Diagram ........................................................................................................................................ 24
WARRANTY...................................................................................................................................................... 25

Titan 6 oz. Popper Model No. 2551
Page 3
gmpopcorn.com
SAFETY PRECAUTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
014_020416
WARNING
To avoid burns, DO NOT touch the kettle or any heated surface.
DO NOT place or leave objects in contact with heated surfaces.
013_092414
WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914
WARNING
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
WARNING
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
022_060215

Titan 6 oz. Popper Model No. 2551
Page 4
gmpopcorn.com
WARNING
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
012_010914
WARNING
This machine is NOT to be operated by minors.
007_010914
Note:Improvements are always being made to Gold Medal’s equipment. This information
may not be the latest available for your purposes. It is critical that you call Gold Medal’s
Technical Service Department at 1-800-543-0862 for any questions about your
machine operations, replacement parts, or any service questions. (Gold Medal
Products Co. does not assume any liability for injury due to careless handling and/or
reckless operation of this equipment.) General images may be used in manual for
reference only.

Titan 6 oz. Popper Model No. 2551
Page 5
gmpopcorn.com
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Items Included with this Unit
Flavacol Measure
6.5 cc (PN 47678)
6 oz. Corn Measure
(PN 49049)
(x4) Black Crutch Tips (PN 49123)
(x2) Knob (PN 47120)
(x2) Tee
Bolt
(PN 75267)
(for Popper Doors)
Knob (PN 47120)
Screw
(PN 42227
)
(for
Old Maid Pan)
Popcorn Decal (PN 49748)
Aluminum
Scoop
(PN 2071)

Titan 6 oz. Popper Model No. 2551
Page 6
gmpopcorn.com
Setup
This unit has been tested at the factory.
1. Remove all packaging and tape prior to operation. Remove accessories and carefully
remove kettle packed in cabinet interior.
2. Place unit on a sturdy, level base.
3. Unit has 4 glide feet preinstalled at the factory (see image below). Install a Black
Crutch Tip on each foot. Firmly push crutch tip over glide until it covers glide entirely.
4. Tilt kettle and insert into hanger arms, then allow kettle to return naturally to an
upright position (see image below).
5. Plug kettle lead into receptacle located on ceiling of cabinet interior. Align keyed or
hook shaped prong with the correct opening, then push plug all the way in and twist
or rotate to lock in place. To unplug, untwist kettle plug before attempting to pull from
receptacle.
6. Door knobs are shipped in accessories pack. Install a door knob with tee bolt on each
popper door; install knob with screw on old maid pan.
7. Apply Popcorn decal to unit.
8. After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Black Crutch Tip
Glide (pre-installed
at the
factory)
General images shown for reference only.
Kettle shown mounted
in hanger arms.
Kettle lead
shown plugged
into kettle
receptacle.

Titan 6 oz. Popper Model No. 2551
Page 7
gmpopcorn.com
Electrical Requirements
The following power supply must be provided (reference unit Data Plate for Wattage requirement):
120 V~, 60 Hz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
008_051514
A certified electrician must furnish sufficient power for proper machine operation and install any
supplied receptacle (reference unit Data Plate for model specific Volts AC, Hertz, and Wattage
requirements). We recommend this equipment be on a dedicated and protected circuit. Failure
to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal
Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of
extension cords is not recommended due to safety concerns, and may cause sacrificed and/or
reduced performance. Make sure cord is located to prevent a trip hazard or unit upset. Units with
an IEC Power Cord - make sure the IEC cord is properly seated into the IEC receptacle before
powering up the machine.
Before You Plug In Machine
1. Make sure all machine switches are OFF before plugging equipment into receptacle.
2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power
supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).
5. Install unit in a level position.
CAUTION
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614

Titan 6 oz. Popper Model No. 2551
Page 8
gmpopcorn.com
OPERATING INSTRUCTIONS
Controls and Their Functions
KETTLE HEAT SWITCH
ON/OFF lighted rocker switch - supplies power to the heating elements in the popping
kettle. The green switch light ON indicates there is power to the kettle heating element.
KETTLE MOTOR SWITCH
ON/OFF lighted rocker switch - supplies power to the kettle agitator motor. The Kettle
Motor Switch MUST be ON at all times when there is popcorn (popped or un-popped) in
the kettle. The green switch light ON indicates there is power to the agitator motor.
LIGHTS/WARMER SWITCH
ON/OFF lighted rocker switch - supplies power to the interior cabinet light, and heat
element for the corn pan.
Kettle Heat
Switch
Kettle Motor
Switch
Lights/Warmer
Switch

Titan 6 oz. Popper Model No. 2551
Page 9
gmpopcorn.com
Popping Corn Instructions
This section describes instructions for popping Standard (salted) popcorn, and for popping
Pappy’s Kettle Corn.
Amount of Popcorn and Oil
The popper is equipped with a corn, salt, and oil measure. We recommend flavored and colored
coconut oil. Popcorn popped in coconut oil stays fresh longer and does not leave black deposits in
the kettle like other oils. Use only top quality, fresh popcorn from reputable suppliers.
Kettle Size
Popcorn Charge
Oil Charge
Flavacol (Salt)
6 oz. 6 oz. (177 ml) 2 oz. (59 ml)
1/2 Tblsp. (7.5cc)
use small scoop provided
Premeasure all ingredients (adjust as needed for desired taste), or for best results use Mega-Pop®
premeasured popcorn and oil pouch made for your kettle size.
1. Turn all switches ON.
2. To determine when kettle is ready to pop corn (about 4 minutes), test pop three
kernels of corn in one ounce (30 ml) of popping oil. When kernels pop, kettle is ready.
3. Lift kettle lid, pour in popcorn and Flavacol, then add oil; close lid.
4. When corn has finished popping, gently dump the popcorn.
Popping Tip: On final batch, turn Kettle Heat Switch OFF just as lids are forced open
by the popping corn (kettle has plenty of heat to finish popping). This helps
eliminate smoke/odor from any oil residue remaining in kettle.
5. When finished popping, turn KETTLE HEAT and KETTLE MOTOR switches OFF.
NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING CORN!

Titan 6 oz. Popper Model No. 2551
Page 10
gmpopcorn.com
Care and Cleaning
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water. DO NOT clean appliance with a water jet.
Always unplug the equipment before cleaning or servicing.
025_111616
WARNING
To avoid serious burns, DO NOT touch the kettle while it is hot!
028_082715
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only
use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of
advertising your product.
For surfaces needing further cleaning or degreasing, Watchdog Stainless Cleaner (Item No. 2088)
or Watchdog Concession Equipment Degreaser (Item No. 2580) is available for use accordingly.
For any cleaning products used, follow the manufacturer’s instructions on the product. DO NOT
use oven cleaners or abrasive materials as they will damage parts of machine.
Note: It is extremely important to follow all cleaning procedures, otherwise parts
damage and equipment failure will result. The warranty does not cover parts that
are damaged due to improper cleaning.
Daily Kettle Cleaning Instructions
1. Turn the power switch OFF and unplug the unit.
CAUTION: A hot kettle will cause burns if you touch it. Allow kettle to cool at least 1
hour before attempting to clean. DO NOT use ice or water to cool down a hot
kettle! Severe kettle damage will result and steam burns may occur!
2. When cool, wipe outside of kettle clean using a clean, soft cloth and Gold Medal
Watchdog Stainless Cleaner (Item No. 2088). DO NOT use oven cleaners or abrasive
materials as they will damage the kettle.
3. Mix 2 tablespoons (29.6 ml) of Gold Medal’s Heat’n Kleen (Item No. 2095) in 1 gallon
(3.8 L) of water.
4. Only pour enough of the Heat’n Kleen pre-mixed solution into the kettle to fill it 1/2 inch
(12.7 mm) deep (it is not necessary to use the entire gallon at once).
5. Plug in the unit.
6. Turn kettle heat ON. When solution starts to boil, turn kettle heat OFF.
7. Allow kettle to cool at least 1 hour, then unplug unit.