Goldmedal 5550 User manual

Part No. 42687
Revised March 2003
HOLDING CABINETS
Instruction Manual
Model #5550 AND #5551

SAFETY PRECAUTIONS

Holding Cabinets
All Models #5550 and #5551
3
FORWARD
This manual covers the all models #5550 and #5551 product holding cabinets. You can be very proud of
your 5550 or 5551 Holding Cabinet. In addition to being an attractive "eye catcher", it contains various
engineering innovations which make it the leader in the industry. The exterior of the machine is designed
and built-up to present an attractive appearance for many years.
INSTALLATION
CHECKING SHIPMENT
Unpack the shipping crate and check thoroughly for any damage which may have occurred in transit. Any
claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Voltage for your warmer is 120 Volt, 60 Cycle. The Holding Cabinets will draw 1020 Watts. Your electrician
must furnish sufficient current for the proper operation of your machine. We recommend that this machine
be fused on a line by itself. The switches and controls which operate the warmer are located on the top front
of the machine.

Holding Cabinets
All Models #5550 and #5551
4
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
LIGHT SWITCH
Flipping this switch to the "ON" position energizes the light and rotisserie motor.
Note: The rotisserie will only function with the door closed
HEAT SWITCH
Flipping this switch to the "ON" position energizes the heat element.
Note: The is heat element is controlled by the temperature control.
HEAT CONTROL
The machine comes with a variable heat control. The control is graduated from OFF to HIGH. The proper
setting of this control will depend on the temperature of the items being placed inside and how many times
the door is opened.
EASY STEPS FOR USING UNIT
1. Fill one or both pans to provide humidity as needed
2. Turn heat switch to on position
3. Turn heat control to high and preheat unit approximately 1 hour.
4. Turn temperature control to 170 DEG. F to maintain 150 DEG. F product temperature.
5. Load food products when preheat is complete. If loading pizza, place in cabinet straight from cooking
oven.
6. Turn on light switch for light and rotating rack if equipped.
CARE AND CLEANING
The stainless steel body of the Warmer is easy to keep clean. Usually a damp cloth will remove all dirt and
grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean
and sparkling. Remember the inside of the glass must be cleaned too.

Holding Cabinets
All Models #5550 and #5551
5
MAINTENANCE INSTRUCTIONS

Holding Cabinets
All Models #5550 and #5551
6
ORDERING SPARE PARTS
*Always speak to a Gold Medal Products Technical Service Advisor before ordering any
parts to help ensure accuracy for your product. Include diagrams may not be the latest
information.
1. Identify the needed part by checking it against the photos, illustrations, and/or parts list.
2. When ordering, please include part number, part name, and quantity needed.
3. Please include your model name, serial number, and date of manufacture (located on the machine
nameplate) with your order.
4. Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
Or, place orders by phone or online:
[phone]
[phone]
Fax: [phone]
E-mail: [email protected]:
Web Page: www.gmpopcorn.com

Holding Cabinets
All Models #5550 and #5551
7
PARTS LIST
MODEL #5550
Model # Model # Model #
5550PR 5550PZ 5550FR
Item No Part No Part No Part No Description
1 22038 22038 22038 Lead-In Cord*
2 17626 17626 17626 Heat Element
3 40712 40712 ~~ Plunger Switch
4 41033 41033 41033 Pilot Light
5 42798 42798 42798 Rocker On/Off Switch
6 50296 50296 ~~ Drive Motor
7 42653 ~~ ~~ Preztel Rack
~~ 43242 ~~ Pizza Rack *
~~ ~~ 43417 Flat Rack *
8 42617 42617 42617 Heat Control
9 42619 42619 42619 Thermometer
10 42620 42620 42620 Dome
11 42621 42621 42621 Pan Cover
12 42622 42622 42622 Bottom Pan
13 42625 42625 42625 Wire Cover
14 42628 42628 42628 Hinge
15 42627 42627 42627 HingePin
16 42629 42629 42629 Element PanWeldment
17 42630 42630 42630 Drive Connector
18 42643 42643 42643 Inner Door Weldment
19 42644 42644 42644 Outer Door Weldment
20 42648 42648 42648 Frame Weldment
21 42654 42654 42654 Bottom Plate
22 67512 67512 67512 Door Magnet *
23 87049 87049 87049 Knob, Heat Control
24 42650 42650 42650 Front and Side Glass
25 42659 42659 42659 Door Glass
26 42626 42626 42626 Door Handle
27 44073 44073 44073 StrainRelief *
28 42616 42616 42616 4" Plastic NSF Legs
29 42660 42659 Side Graphics
30 42651 42651 42651 Side Glass Channel
31 42652 42652 42652 Top Glass Channel
32 42655 42655 42655 Front Label
33 74142 74142 74142 #8-32X 1/4Pan HD PH(34)
34 43208 43208 43208 Theromstat
35 42006 42006 42006 Terminal Block
* Not Shown

Holding Cabinets
All Models #5550 and #5551
8
PARTS LIST
MODEL #5551
Model # Model # Model #
5551PR 5551PZ 5551FR
Item No Part No Part No Part No Description
1 22038 22038 22038 Lead-In Cord *
2 17626 17626 17626 Heat Element
3 40712 40712 ~~ Plunger Switch
4 41033 41033 41033 Pilot Light
5 42798 42798 42798 Rocker On/Off Switch
6 50296 50296 ~~ Drive Motor
7 42779 ~~ ~~ Preztel Rack
~~ 42780 ~~ Pizza Rack *
~~ ~~ 43209 Flat Rack *
8 42617 42617 42617 Heat Control
9 42619 42619 42619 Thermometer
10 42763 42763 42763 Dome
11 42621 42621 42621 Pan Cover
12 42764 42764 42764 Bottom Pan
13 42767 42767 42767 Wire Cover
14 42628 42628 42628 Hinge
15 42627 42627 42627 Hinge Pin
16 42768 42768 42768 Element Pan Weldment
17 42630 42630 42630 Drive Connector
18 42774 42774 42774 Inner Door Weldment
19 42775 42775 42775 Outer Door Weldment
20 42776 42776 42776 Frame Weldment
21 42781 42781 42781 Bottom Plate
22 67512 67512 67512 Door Magnet *
23 87049 87049 87049 Knob, Heat Control
24 42778 42778 42778 Side Glass
25 42777 42777 42777 Door Glass
26 42626 42626 42626 Door Handle
27 87163 87163 87163 Strain Relief *
28 47155 47155 47155 Rubber Feet 3/4" High
29 43270 43271 SideGraphics
30 42651 42651 42651 Side Glass Channel
31 42652 42652 42652 Top Glass Channel
32 42782 42782 42782 Front Label
33 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34)
34 43208 43208 43208 Thermostat
35 42006 42006 42006 Terminal Block
* Not Shown

Holding Cabinets
All Models #5550 and #5551
9
Model # Model # Model#
5550PRD 5550PZD 5550FRD
Item No Part No Part No Part No Description
1 22038 22038 22038 Lead-In Cord *
2 17626 17626 17626 Heat Element
3 40712 40712 ~~ Plunger Switch (2)
4 41033 41033 41033 Pilot Light
5 42798 42798 42798 Rocker On/Off Switch
6 50296 50296 ~~ Drive Motor
7 42653 ~~ ~~ Preztel Rack
~~ 43242 ~~ Pizza Rack *
~~ ~~ 43417 Flat Rack *
8 42617 42617 42617 Heat Control
9 42619 42619 42619 Thermometer
10 43243 43243 42620 Dome
11 42621 42621 42621 Pan Cover
12 43250 43250 42622 Bottom Pan
13 42625 42625 42625 Wire Cover
14 42628 42628 42628 Hinge (4)
15 42627 42627 42627 Hinge Pin (4)
16 42629 42629 42629 Element Pan Weldment
17 42630 42630 42630 Drive Connector
18 42643 42643 42643 Inner Door Weldment (2)
19 42644 42644 42644 Outer Door Weldment (2)
20 42648 42648 42648 Frame Weldment
21 42654 42654 42654 Bottom Plate
22 67512 67512 67512 Door Magnet *
23 87049 87049 87049 Knob, Heat Control
24 42650 42650 42650 Front and Side Glass (2)
25 42659 42659 42659 Door Glass (2)
26 42626 42626 42626 Door Handle
27 44073 44073 44073 Strain Relief *
28 42616 42616 42616 4" Plastic NSF Legs
29 42660 42659 Side Graphics
30 42651 42651 42651 Side Glass Channel
31 42652 42652 42652 Top Glass Channel
32 42655 42655 42655 Front Label
33 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34)
34 43208 43208 43208 Thermostat
35 42006 42006 42006 Terminal Block
* Not Shown
DOUBLE DOOR PARTS LIST
MODEL #5550

Holding Cabinets
All Models #5550 and #5551
10
DOUBLE DOOR PARTS LIST
MODEL #5551
Model # Model # Model #
5551PRD 5551PZD 5551FRD
Item No Part No Part No Part No Description
1 22038 22038 22038 Lead-In Cord*
2 17626 17626 17626 Heat Element
3 40712 40712 ~~ Plunger Switch (2)
4 41033 41033 41033 Pilot Light
5 42798 42798 42798 Rocker On/Off Switch
6 50296 50296 ~~ Drive Motor
7 42779 ~~ ~~ Preztel Rack
~~ 42780 ~~ Pizza Rack *
~~ ~~ 43209 Flat Rack *
8 42617 42617 42617 Heat Control
9 42619 42619 42619 Thermometer
10 43244 43244 43244 Dome
11 42621 42621 42621 Pan Cover
12 43249 43249 43249 Bottom Pan
13 42767 42767 42767 Wire Cover
14 42628 42628 42628 Hinge (4)
15 42627 42627 42627 Hinge Pin (4)
16 42768 42768 42768 Element Pan Weldment
17 42630 42630 42630 Drive Connector
18 42774 42774 42774 Inner Door Weldment (2)
19 42775 42775 42775 Outer Door Weldment (2)
20 42776 42776 42776 Frame Weldment
21 42781 42781 42781 Bottom Plate
22 67512 67512 67512 Door Magnet (2) *
23 87049 87049 87049 Knob, Heat Control
24 42778 42778 42778 Side Glass (2)
25 42777 42777 42777 Door Glass (2)
26 42626 42626 42626 Door Handle
27 87163 87163 87163 StrainRelief *
28 47155 47155 47155 Rubber Feet 3/4" High
29 43270 43271 Side Graphics
30 42651 42651 42651 Side Glass Channel
31 42652 42652 42652 Top Glass Channel
32 42782 42782 42782 Front Label
33 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34)
34 43208 43208 43208 Thermostat
35 42006 42006 42006 Terminal Block
* Not Shown

Holding Cabinets
All Models #5550 and #5551
11
CABINET ASSEMBLY
23
15
7
24
10
29
5 9 32 4
25
26
11 12 28

Holding Cabinets
All Models #5550 and #5551
12
BOTTOM INSIDE ASSEMBLY
35
34
2

Holding Cabinets
All Models #5550 and #5551
13
TOP INSIDE ASSEMBLY
59
4
8
6
3

Holding Cabinets
All Models #5550 and #5551
14
ELECTRICAL SCHEMATIC
UPPER CONTROL CABINET WIRING IS #16 AWG CSA LISTED, 600VOLT – 105C U.L. RECOGNIZED.
LOWER CONTROL CABINET WIRING IS #16AWG CSA LISTED, 450C UL RECONGIZED.
Double
DoorOnly

Holding Cabinets
All Models #5550 and #5551
15
ELECTRICAL SCHEMATIC
UPPER CONTROL CABINET WIRING IS #16 AWG CSA LISTED, 600VOLT – 105C U.L. RECOGNIZED.
LOWER CONTROL CABINET WIRING IS #16AWG CSA LISTED, 450C UL RECONGIZED.

WARRANTY
WE WARRANT to the original purchaser the Gold Medal equipment sold by us to
be free from defects in material or workmanship under normal use and service. Our
obligation under this warranty shall be limited to the repair or replacement of any
defective part for a period of six (6) months from the date of sale to the Original
Purchaser with regard to labor and two (2) years with regard to parts and does not
cover damage to the equipment caused by accident, alteration, improper use, voltage,
abuse, or failure to follow instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR
PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION
ON THE FACE HEREOF. We neither assume, nor authorize any other person
to assume for us, any other obligation or liability in connection with the sale of said
GOLD MEDAL equipment or any part thereof.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that
person, firm, association, or corporation who was billed by the GOLD MEDAL
PRODUCTS COMPANY, or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT 1-800-
543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE
EQUIPMENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS
CONCERNING THE REPAIR OR REPLACEMENT OF PARTS.
GOLD MEDAL PRODUCTS COMPANY
10700 Medallion Drive
Cincinnati, Ohio 45241-4807 USA
www.gmpopcorn.com
Phone: [phone]
Fax: [phone]
© The text, descriptions, graphics and other material in this publication are the proprietary
and exclusive property of Gold Medal Products Company and shall not be used, copied,
reproduced, reprinted or published in any fashion, including website display, without its
express written consent.