golmar ART 4 LITE/G2+ User manual

USER MANUAL
TECHNOLOGY
Code 50122623 TART 4 LITE/G2+ EN REV.0221
Art 4 LITE/G2+ monitor
Hands-free / Handset
Art 4H LITE/G2+ monitor
2-wire installation
Art 4TH LITE/G2+ monitor
Hands-free

2
CONTENTS
Contents ....................................................................................................................................................................2
IMPORTANT IN THIS MANUAL ................................................................................................................................2
VERY IMPORTANT (VILLA KIT: S5110 ART 4 LITE) .................................................................................................2
Set-up warnings .........................................................................................................................................................2
Communication with hearing aid (ART 4H LITE/G2+ and ART 4TH LITE/G2+ monitors only)................................2 to 3
Characteristics...........................................................................................................................................................3
System operation .......................................................................................................................................................3
Art 4 LITE/G2+ / ART 4H LITE G2+ and ART 4TH G2+ monitor............................................................................4 to 21
Description ......................................................................................................................................................4
Installation .......................................................................................................................................................5
Installation terminals ........................................................................................................................................5
Configuration switches.....................................................................................................................................5
Main menu .......................................................................................................................................................6
Settings menu............................................................................................................................................7 to 9
Door panel call screen....................................................................................................................................10
Communication screen ..................................................................................................................................11
Image and communication settings........................................................................................................12 to 14
P e menu .........................................................................................15 to 18eriod of time for 'Do not disturb' mod
Intercom menu.......................................................................................................................................18 to 21
Settings and operation of the guard monitor ...................................................................................................22
Special codes ..................................................................................................................................................23 to 26
Cleaning the monitor ................................................................................................................................................27
Compliance..............................................................................................................................................................28
- before installing or marking modifications to the devices.Always disconnect the power supply
- The fitting and handling of these devices must be carried out by authorised personnel.
- The wiring must run at least 40cm away from any other wiring.
- Do not overtighten the screws of the monitor connector.
- Install the monitor in adry protected location free from the risk of dripping or splashing water.
- Do not place in humid, dusty or smoky locations, or near sources of heat.
- Before connecting the device to the mains, check connections between the door panel, power supply, distributors & monitors.
- Use the Golmar RAP-GTWIN/HF cable (2x1mm²).
- Always follow the instructions contained in this manual.
SET-UP WARNINGS
If you have the “S5110 ART 4 LITE” villa kit with Soul door panel, download “TS5110 ART 4 LITE (cód. 50122625)”
user manual from the next QR or in the link Golmar web: hps://doc.golmar.es/search/manual/50122625
VERY IMPORTANT (VILLA KIT: S5110 ART 4 LITE)
TS5110 ART 4 LITE
MANUAL
QR
T
Make sure that the hearing aid is 15-25 cm away from the
monitor to ensure maximum audio quality during
communication with the door panel, (see page 4).
COMMUNICATION WITH HEARING AID (ART 4H LITE/G2+ MONITOR ONLY)
- This manual describes new menu (with white background) only with and later of ART 4 LITE G2+, ART 4H LITE V.04
G2+ monitors and with and later of ART 4TH LITE G2+ monitor.V.01
- ART 4 LITE G2+, ART 4H LITE G2+ monitors with and earlier refer to the quick guide enclosed with the V.03
corresponding monitor.
IMPORTANT IN THIS MANUAL
ART 4 LITE/G2+ MONITOR

3
SYSTEM OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made
and the door panel LED will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that
a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by mistake,
press the button for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon displayed on the screen . To view the image from slave monitors 2 or 3, is in green color
press the image. If the call is not answered within 45 seconds, one of the buttons of the monitor to display the door
panel LED will turn off and the system will become free.
- To establish communication, press the push button below off-the-hook icon shown on the screen or (if the monitor is
the 'ART 4TH LITE' you can also lift the handset). The icon displayed on the screen is in red color, door panel LED
..... will turn off and the led will turn on. If the monitor is an 'ART 4H LITE' with icon on the front, make sure that the
hearing aid is between 15 and 25 cm away from the monitor to ensure maximum audio quality during communication
with the door panel. (Note: with the 'ART 4TH LITE' monitor, communication with hearing aids must be by establishing
communication with the handset).
- Connection will last for 90 seconds or until the push button below on-the-hook icon shown on the screen is pressed
or (if the monitor is the 'ART 4TH LITE', hang up the handset only if communication has been established by lifting the
handset). When communication ends, door panel LED will turn off and the system will become free. If vocal
synthesis is enabled, a 'Communication is finished' message will indicate that the call is over.
- To open door or of the door panel, press the push button below of corresponding icon displayed on the screen
during the call or communication processes: one press will activate the lock release for 3 seconds and the door
panel LED will also turn on for 3 seconds. If vocal synthesis is enabled, a 'Door is open' message will be indicated
on the door panel.
- 6 to 21Detailed operation of the monitor is described on pp. .
CHARACTERISTICS
- Hands-free monitor ("ART 4TH/LITE" monitor, also allows communication with a handset).
- 4,3" TFT colour screen. (New menu with white background).
- with simple installation non-polarised 2 wires Monitor ( bus).
- The ART 4H LITE / ART 4TH LITE (in the handset) monitor, interacts with hearing aids equipped with T-mode,
making conversation between apartment and door panel easier.
- Function buttons and selection of menu functions.
- Push button for access (standby monitor) and selection of menu function.
- User menu (new menu with white background).
- Installer menu (new menu with white background).
- menu (new menu).Image and communication settings
- Available with and later of ART 4 LITE G2+, ART 4H LITE G2+ monitors (New menu with white background): V.04
and with and later of ART 4TH LITE G2+ monitor. ART 4 LITE G2+/ ART 4H LITE G2+ monitors with V.01 Important:
V.03 and earlier refer to the quick guide supplied with the corresponding monitor.
- Output to auxiliary call repeater (maximum 50mA/12Vdc).
- "HZ" input for calls from apartment front door. Up to 6 monitors/ apartments with push button "HZ" activated Important:
at the same time (with system and monitors in standby).
- Push buttons for Door release 1 and 2.
- Notification leds.
- Configuration switches.
- ART 4/LITE & ART 4H/LITE monitor with & later with new menu ( general door panels ’special codes’).V.04 accepts
- ART 4TH/LITE monitor with & later with new menu (accepts general door panels ’special codes’).V.01
12
COMMUNICATION WITH HEARING AID (ART 4TH LITE/G2+ MONITOR ONLY)
T
The handset of the ART 4TH LITE G2+ monitor enables communication with hearing aids equipped with T-mode,
making conversation possible (inductive loop).Remember: Set the hearing aid switch to position T.
ART 4 LITE/G2+ MONITOR

4
*
A. Handset.
B. Function buttons, access and selection of menu
functions.
The function of each button is shown on the monitor
screen with an icon located just above each button
(see pp. 6 to 21).
Press to access 'Doctor mode' function (standby monitor):
- With the special code '0441' (Doctor mode) already
entered (see pp. 23 to 26), press the button for 1 sec. for
menu access & then to activate/ deactivate the function.
- The push button led will blink in white color and the
icon if the will be displayed in the main menu
function 'Doctor mode' is activated and it will turn off if
the function is deactivated.
C. LED:Monitor status
Yellow ON: Standby without notification.
Red ON: “Do not disturb” Mode a tivated.c
D. Cable slot (ART 4TH LITE G2+ monitor).
E. Speaker (hands-free communication mode).
F. 4.3" TFT colour screen.
G. Golmar use.
H. (hands-free communication mode).Microphone
I. Communication with hearing aids (ART 4H LITE G2+/
ART 4TH LITE G2+). Set the hearing aid switch to the T
position, see page 2 to 3.
J. Raised dots for the visually impaired people.
In call :/ communication
Above this raised dot is the 'Start/ nd communication' E
button.
Above these raised dots is the 'Door opening' button.
K. Configuration switches.
L. . Installation terminals
M. Wall mounting connector fixing (x4).
N. Speaker (ART 4TH LITE G2+ “communication with
handset”).
O. Microphone (ART 4TH LITE G2+ “communication with
handset”).
DESCRIPTION
G
A
F
B
C
I
J
G
H
E
D
M
K
L
M
N
SA
GND
HZ
HZ
ON
1 2 3 4 5 6 7 8
BUS
BUS
SA
OFF = 0
ON = 1
DIP 1 to 7
DIP 8
Monitor
address
EOL
resistor
GND
HZ
HZ
BUS
BUS
128
codes
A
D
O
ART 4 LITE/G2+ MONITOR

5
Avoid dusty or smoky environments or locations near sources of heat.
For proper installation, use the template supplied with the product.
1. Position the top of the template at a height of 1.65m.
2. If you are going to use an embedding box to pass the wiring through, make sure that it is in line with the holes
corresponding to the box model chosen and fix the connector. If you prefer to fix the connector directly to the
wall, make four 6mm holes at the points indicated (A), insert the wall plugs supplied and screw in the connector.
3. Pass the installation wires through the middle hole and connect them to the removable terminals as shown in the
wiring diagrams. Before connecting the removable terminals to the monitor, configure the switch as indicated below.
4. Connect the removable terminals to the monitor and place the monitor in front of the connector, making sure the
fixings line up. Move the monitor downwards to secure it.
INSTALLATION
INSTALLATION TERMINALS (L)
For ease of installation, the installation terminals are removable and supplied in a separate bag. Once the
terminals are wired, place them in position.
BUS, BUS: Communication BUS (non-polarised).
SA, GND: Auxiliary call repeater output (max 50mA/12V), relay SAR-12/24.
HZ, HZ: Apartment front door button input:
Connect only on the master monitor. The signal received is then transmitted
to the slave monitors in the same apartment through the BUS.
CONFIGURATION SWITCHES (K)
Note: HZ push button function mode: When HZ push button is pressed will be call tone and activate the output of
auxiliary call repeater with standby monitor, call process, communication process (HZ tone with lower audio level),
intercom process and "Do not disturb" mode. Important: Up to 6 monitors/ apartments with push button "HZ"
activated at the same time (with system and monitors in standby).
ART4 LITE G2+ / ART 4H LITE G2+ monitor with V.04 & later, ART 4TH G2+ monitor with V.01 & later
(addresses 1 to 128):
Switches 1 to 7: Sets the monitor address (addresses 1 to 128).
The switches set to OFF have a zero value. The values of the switches set to ON are shown in the table below. The
monitor code is the sum of the values of the switches set to ON.
.
Switch 8: This activates the end-of-line resistance in the ON position. Activate it in monitors where the bus cable
ends. Deactivate it only in intermediate monitors.
.
To define whether the monitor is master or slave:
To define whether the monitor is master or slave (see special codes page 23 to 26). Each apartment must have one
master monitor, and only one.
.
Important: V.04 This manual describes new menu (with white background) only with and later of ART 4 LITE G2+,
ART 4H LITE G2+ monitors and with and later of ART 4TH LITE G2+ monitor.V.01
ART 4 LITE G2+, ART 4H LITE G2+ monitors with and earlier refer to the quick guide enclosed with the V.03
corresponding monitor.
Important: Apartment 1 (Dip1 to ON & Dip2-Dip7 to OFF)
Important: Apartment 128 (Dip1 - Dip7 to OFF).
Switch number: 1 2 3 4 5 6 7
Value when ON: 1 2 4 8 16 32 64
Table of values
1 2 3
ON
Example: 0 + 0 + 4 +0+16+0+0= 20
4 5 6 7 8
SA
GND
HZ
HZ
ON
1 2 3 4 5 6 7 8
BUS
BUS
ART 4 LITE/G2+ MONITOR

6
MAIN MENU
If the device is in standby (screen switched off), to access the main menu, press any of the buttons of the monitor.
Then press the button located just below the corresponding icon. The device will return to standby mode after 20
seconds without activity.
Press the button below icon to access the menu of the intercom between other monitors in the same
apartment or other apartments (see page 18 to 21). Note: If there is a guard monitor configured in the
building, the icon to intercom menu will be placed in “Access settings menu screen”. See page 7.
Press the button below icon to display the image from the door panel. Note: This enables master
the door panel camera to be changed, the audio on the corresponding door panel to be activated
and the door to be opened (see p. 0).1 If the "display IP cameras" menu (programmable by the
installer) is activated on the monitor, a new menu screen will be displayed; press the button below
the icon to display the image from the master door panel........
Press the button below icon to make changes to the system settings (see pp. 7 to 9).
Press the button below icon for 3 seconds to enable and for 1 second to disable the 'Do
not disturb' function: If the monitor is in 'Do not disturb' mode, the status LED will
illuminate (red) and the ringtone on the monitor will not sound when a call (see note “HZ”
page 5) is received.
With the "Do not disturb" mode deactivated, a one-second press accesses the menu,
allowing you to set a "Do not disturb" mode time period (see pages 15 to 16),
activate/deactivate the intercom between apartments (see page 16) and set an
"Automatic door opening" mode time (see pages 17 to 18).
Disabled Enabled
Press the button below icon to "staircase light" activation (SAR-G2+ & SAR-12/24 modules
required).
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
Main menu
ART 4 LITE/G2+ MONITOR
If there is a monitor configured as "guard" in the building, the icon will appear on the apartment’s
main menu monitors (instead of icon ). Press the button below the icon to make a call to the
guard monitor, (see page 22).

7
SETTINGS MENU
Continued overleaf
Settings menu screen
?
Then press the button below icon to access the settings menu. If you wish to return to the main menu,
press the button below the icon .
Access settings menu screen
Main menu
Press the button below icon to access the settings menu screen.
Access settings menu screen
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
ART 4 LITE/G2+ MONITOR
Note: Icon to intercom menu will be placed in “Access settings menu screen”, if there is a guard monitor
configured in the building. (See page 6).
( )
*
( )
*

8
SETTINGS MENU
Continued overleaf
Continued from previous page.
The 'About' screen provides information about the monitor, such as the software version, address and
whether it is master or slave (M, S1, S2 or S3).
It enables updated versions of the manual to be downloaded to a mobile or tablet, for which it is
necessary to have a QR code scanner app installed.
It enables the monitor to be restored to factory settings, such as melodies, call volume, etc.
Press the button below icon to return to the settings menu .
To restore the monitor to factory settings, press the button below icon to access the factory reset
menu, then press the button below icon to perform this function. Press the button below icon
......to return to the 'About' screen.
Press the button below icon to return to the settings menu.
FW
001 / M
2.01
‘About' screen
Settings menu screen
Settings menu screen
Returning to the main menu: Press the button below
icon to return to the main menu.
?
?
ART 4 LITE/G2+ MONITOR

9
SETTINGS MENU
Continued from previous page.
Option selection screen
Selecting the melody and call volume: Press the button below icon to access the settings screen.
In order to identify the origin of the calls when you are not in front of the monitor, select different
melodies and the desired call volume. Go to the option to be modified by pressing the buttons
below corresponding icons / , then press the buttons below corresponding icons / to
select the melodies and desired call volume. Press the button below icon to return to the
settings menu.
105 05
05
02
05
03
01
03
# #
2
3
4
Settings menu screen
?
# #
Press the button below icon to return to the main menu.
Settings menu screen
?
Main menu
ART 4 LITE/G2+ MONITOR

10
DOOR PANEL CALL SCREEN
Press the hidden button below icon to activate the lock release (or device connected to the relay 1
output of the door panel) for 3 seconds (factory setting, see pp. 23 to 62 ).
Press the hidden button below icon to activate the lock release (or device connected to the relay 2
output of the door panel) for 3 seconds (factory setting, see pp. 23 to 62 ).
1
2
This screen is displayed when receiving a call or pressing the button below icon of the main menu. During a call,
icon displayed on the screen is in green color (during the call process). In the top left of the screen, the source
of the image is displayed. The call has a duration of 45 seconds.
Press the button below icon / to start or end audio communication with the door panel
displayed respectively. Communication has a maximum duration of 90 seconds. Once
communication has ended, the screen will turn off.
1
2
Press the button below icon to change the source of the image as long as the system has more
than one door panel or has an external camera connected and display has been activated (see
pp. 23 to 26). It is possible to make the change during display, call and communication processes.
Press the button below icon for 3 seconds to access the image and monitor volume in call tone
settings menu. Select the option to be modified by pressing the buttons below corresponding
icons / , change to the desired level by pressing the buttons below corresponding icons /....... ....... ...... ......
and validate the changes made by pressing the button below icon , (ver pág. 12 a 14).
End the call tone on the monitor.
Press the button below icon to "staircase light" activation (SAR-G2+ & SAR-12/24 modules
required). Note: Displayed on the screen during a call or communication process if the
function to change the source of the image is not activated by displaying the icon on the ......
screen instead.
2
1
2
1
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
ART 4 LITE/G2+ MONITOR

11
COMMUNICATION SCREEN
This screen is displayed during a communication process. During a communication, icon displayed on the
screen is in green color. In the top left of the screen, the source of the image is displayed. The communication
has a duration of 90 seconds.
1
1
2
Press the button below icon to change the source of the image as long as the system has more
than one door panel or has an external camera connected and display has been activated (see
pp. 23 to 26). It is possible to make the change during display, call and communication processes..
Press the button below icon for 3 seconds to access the image and monitor in communication
volume settings menu. Select the option to be modified by pressing the buttons below
corresponding icons / , change to the desired level by pressing the buttons below
corresponding icons / and validate the changes made by pressing the button below icon , .....
(see pp. 12 to 14).
2
1
Press the button below icon to "staircase light" activation (SAR-G2+ & SAR-12/24 modules
required). Note: Displayed on the screen during a call or communication process if the
function to change the source of the image is not activated by displaying the icon on the ......
screen instead.
Press the hidden button below icon to activate the lock release (or device connected to the relay 1
output of the door panel) for 3 seconds (factory setting, see pp. 23 to 62 ).
Press the hidden button below icon to activate the lock release (or device connected to the relay 2
output of the door panel) for 3 seconds (factory setting, see pp. 23 to 62 ).
1
2
Press the button below icon / to start or end audio communication with the door panel
displayed respectively. Communication has a maximum duration of 90 seconds. Once
communication has ended, the screen will turn off.
1
2
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
ART 4 LITE/G2+ MONITOR

12
During communication process , press the button below icon for 3 a call process (Screen A) or during a (Screen B)
seconds to access the image and monitor in communication volume settings menu.call/
Continued overleaf
2
IMAGE AND COMMUNICATION SETTINGS
The following brightness control menu will then be displayed. Adjust to the desired level by pressing the buttons
below icons / . To access the contrast control, press the button below icon . To exit the image and
communication settings menu, press the button below icon .
Call process screen Communication process screen
Screen A Screen B
4
Press for
3 segundos
1
1
2
1
1
2
1
1
Press for
3 segundos
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
ART 4 LITE/G2+ MONITOR

13
Continued from previous page.
IMAGE AND COMMUNICATION SETTINGS
The following contrast control menu will then be displayed. Adjust to the desired level by pressing the buttons
below icons / . To access the colour control, press the button below icon . To exit the image and
communication settings menu, press the button below icon .
The following colour control menu will then be displayed. Adjust to the desired level by pressing the buttons below
icons / . To access the monitor communication volume control, press the button below icon . call tone / .....
To exit the image and communication settings menu, press the button below icon .
Continued overleaf
1
4
1
4
ART 4 LITE/G2+ MONITOR

14
Continued from previous page.
IMAGE AND COMMUNICATION SETTINGS
The following call tone settings volume during a call process (Screen A) or communication settings volume during
a communication process (Screen B) will then be displayed. Adjust to the desired level by pressing the buttons
below icons / . To return to the brightness control (carousel mode), press the button below icon .
Communication screen
To exit the image and communication settings menu, press the button below icon .call /
Call tone settings volume Communication settings volume
Screen A Screen B
Communication settings volume
Screen B
1
2
1
2
1
2
1
1
2
1
ART 4 LITE/G2+ MONITOR

15
'Do not disturb' mode settings: If the device is in standby (screen switched off), to access the main
menu, press any of the buttons of the monitor. Then press the button below icon to access the
settings screen.
PERIOD OF TIME FOR 'DO NOT DISTURB' MODE MENÚ
Option selection screen
Main menu
Continued overleaf
To set a period of time for in which the monitor will not sound when receiving "Do not disturb" mode
calls (see note "HZ" page 5), go to the option with icon pressing the button below icon or ...... ......
and select the option by pressing the button below icon Then you can set a period of time . (from
00h & 01 minute to 23h & 59 minutes) 'Do not disturb' modefor , by pressing corresponding
buttons / , validate the changes made by pressing the button below icon ....... ......and /
07 00
# #
07 00 08 30
# #
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
Time period setting screen
Option selection screen
ART 4 LITE/G2+ MONITOR

16
Continued from previous page.
PERIOD OF TIME FOR 'DO NOT DISTURB' MODE MENÚ
Option selection screen
07 00
Time period setting screen
# #
07 00
For external intercom, the monitor(s) of the apartment that makes the call and the monitor(s) of the
apartment that receives the call must have the intercom function enabled:
To enable/disable the intercom function between apartments, go to the option with icon by pressing the
buttons below corresponding icons / . Then press the button below icon to enable / disable ...... ...... ...... ....... .......
this function, validate the changes made by pressing the button below icon . See pages 20 to 21 for
intercom between apartments. (This function is disabled by default).
Main menu
Press the button below icon to return to the main menu. If the 'Do not disturb' mode is enable (see
pages 15 to 16) will be shown the icon in the main menu and the monitor status LED will turn on
(red color).
Option selection screen
08 30
07 00
Continued overleaf
ART 4 LITE/G2+ MONITOR

Continued overleaf
17
Continued from previous page.
PERIOD OF TIME FOR 'DO NOT DISTURB' MODE MENÚ
”Automatic door openning”: This selection is visible in the “Do Not Disturb” settings menu, with the special
code '0441' (Doctor mode) already entered in the monitor for automatic door opening (see special
codes pp. 23 to 26). Note: In standby monitor, you can also access the menu by pressing the push
button....... (blinking in white color) on the monitor.
1
Option selection screen
To set a period of time for automatic door openning mode (after 3 seconds of receiving a call from the
door panel), go to the option with icon pressing the button below icon or and select the option ...... ......
by pressing the button below icon .Then you can set a period of time (from 00h & 01 minute to 23h &
59 minutes) for 'Automatic door openning’ mode, by pressing corresponding buttons / and / , ...... ......
validate the changes made by pressing the button below icon .
# #
Time period setting screen
Option selection screen
# #
07 00
07 00
07 00
08 30
1
07 00
07 00
ART 4 LITE/G2+ MONITOR

18
INTERCOM MENU
Continued overleaf
Main menu
Option selection screen
07 00
08 30
Press the push button below the icon to return to the main menu screen. If the "automatic door ......
opening" mode has been activated (see page 17) the icon will be displayed at the top left of the ......
main menu screen and the led of the push button will blink in white color when the monitor is in ......
standby mode (screen off).
Continued from previous page.
PERIOD OF TIME FOR 'DO NOT DISTURB' MODE MENÚ
If the unit is in standby mode (screen off), press any of the buttons on the monitor to access the main menu. Then press
the button located below the icon to access the intercommunication menu. From this menu you can contact .......
other monitor(s) in your apartment (internal intercom) or in other apartments (external intercom). For external
intercom, the monitor(s) of the apartment making the call and the monitor(s) of the apartment receiving the call must
have the external intercom function activated (see page 16).
Select the option to perform an external intercom.
If during the intercom process with another monitor a call is received from the door panel, the intercom process will be
terminated,and the door panel call will be received on the corresponding monitor.
Press the button below icon to return to the main menu.
Intercom menu
M
S2
S1
S3
Main menu
Note: New menu available with V.04 of ART 4 LITE G2+ and ART 4H LITE G2+ monitors.
New menu available with V.01 of the ART 4TH LITE G2+ monitor.
ART 4 LITE/G2+ MONITOR

To make an internal intercom call (to another monitor(s) in the same apartment), press the buttons below
corresponding icons / to select the monitor to be called, press the push button below the icon to make the
call.
M
S2
S1
S3
Menú intercomunicación
M
S2
S1
S3
Menú intercomunicación
45"
S1
The calling monitor will sound a confirmation melody and indicate the called monitor and available call time, if you wish
to cancel the call press the push button below icon to return to the main menu. Press the push button below icon ......
......to return to the intercom menu. The monitor receiving the call will sound a confirmation melody showing on
screen the monitor making the call and the time available to answer the call, press the push button below icon to ......
establish communication and press the push button below icon to end the communication. Note: You will find
information about the monitor itself with the address, Master, Slave 1 to Slave 3 of the monitor in the 'About' menu,
(see p. 8).
Monitor receives callMonitor makes the call
45"
M
Continued overleaf
Continued from previous page.
19
INTERCOM MENU
ART 4 LITE/G2+ MONITOR

20
INTERCOM MENU
Continued from previous page.
Continued overleaf
To make an external intercom call (to other apartments), go to the option with the icon by pressing the push .......
buttons located below the corresponding / icons, press the push button located below the icon to ....... ...... .......
access the menu for selecting the apartment code you wish to communicate with. Remember: For external
intercommunication, the monitor(s) of the home making the call and the monitor(s) of the home receiving the call
must have the external intercommunication function activated (see page 16).
Apartment code selection screen
0 0 1
# #
M
S2
S1
S3
Intercom menu
M
S2
S1
S3
Intercom menu
Press the button below icon to select the apartment code field to be modified, then press the buttons below
icons / to modify with the apartment code to be called and press the button below icon to make the
call. # #
Apartment code selection screen
0 0 3
# #
ART 4 LITE/G2+ MONITOR