Grandstream Networks GRP26 Series User manual

Grandstream Networks, Inc.
GRP26XX Series
Security Manual

P a g e | 1
GRP26XX Security Manual
Table of Contents
OVERVIEW..................................................................................................................... 3
WEB UI/SSH ACCESS ................................................................................................... 4
Web UI Access ..................................................................................................................................... 4
Web UI Access Protocols ..................................................................................................................... 4
Admin Login.......................................................................................................................................... 5
User Management Levels .................................................................................................................... 6
SECURITY FOR SIP ACCOUNTS AND CALLS ............................................................ 8
Protocols and Ports .............................................................................................................................. 8
Anonymous/Unsolicited Calls Protection ............................................................................................. 9
SRTP .................................................................................................................................................. 11
SNMP ................................................................................................................................................. 11
SECURITY FOR GRP SERVICES ................................................................................ 12
Firmware Upgrade and Provisioning .................................................................................................. 12
TR-069................................................................................................................................................ 13
Syslog................................................................................................................................................. 15
SECURITY GUIDELINES FOR GRP DEPLOYMENT .................................................. 16

P a g e | 2
GRP26XX Security Manual
Table of Figures
Figure 1 : Web UI Access Settings................................................................................................................ 4
Figure 2 : Web UI Login ................................................................................................................................ 5
Figure 3 : Change Password on First Boot ................................................................................................... 5
Figure 4: Change Admin Level Password..................................................................................................... 6
Figure 5 : Change User Level password....................................................................................................... 7
Figure 6 : Configure TLS as SIP Transport ................................................................................................... 8
Figure 7 : SIP TLS Settings........................................................................................................................... 8
Figure 8 : Additional SIP TLS Settings .......................................................................................................... 9
Figure 9 : Anonymous Call Rejection ............................................................................................................ 9
Figure 10 : Settings to Block Anonymous Call ............................................................................................ 10
Figure 11 : SRTP Settings........................................................................................................................... 11
Figure 12 : SNMP Setting ........................................................................................................................... 11
Figure 13 : Upgrade and Provisioning ........................................................................................................ 12
Figure 14 : TR-069 Connection Settings..................................................................................................... 14
Figure 15 : Syslog Protocol ......................................................................................................................... 15

P a g e | 3
GRP26XX Security Manual
OVERVIEW
This document presents a summary of security measures, factors, and configurations that users are
recommended to consider when configuring and deploying our GRP series of IP Phones.
Note: We recommend using the latest firmware for latest security patches.
The following sections are covered in this document:
•Web UI/SSH Access
Web UI access is protected by username/password and login timeout. Three-level user management is
configurable. SSH access is supported for mainly troubleshooting purpose and it is recommended to disable
it in normal usage.
•Security for SIP Accounts and Calls
The SIP accounts use specific port for signaling and media stream transmission. It also offers configurable
options to block anonymous calls and unsolicited calls.
•Security for GRP Services
GRP supports service such as HTTP/HTTPS/TFTP/FTP/FTPS and TR-069 for provisioning. For better
security, we recommend using HTTPS/FTPS with username/password and using password-protected XML
file. We recommend disabling TR-069 (disabled by default) if not used to avoid potential port exposure.
•Deployment Guidelines for GRP
This section introduces protocols and ports used on the GRP and recommendations for routers/firewall
settings.
This document is subject to change without notice.
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.

P a g e | 4
GRP26XX Security Manual
WEB UI/SSH ACCESS
Web UI Access
The GRP embedded web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages
allow users to configure the device through a web browser such as Microsoft IE, Mozilla Firefox, Google
Chrome and etc. With this, administrators can access and configure all available GRP information and
settings. It is critical to understand the security risks involved when placing the IP Phones on public networks
and it’s recommended not to do so.
Web UI Access Protocols
HTTP and HTTPS are supported to access the GRP’s web UI and can be configured under web UI →
Maintenance → Security settings → Security.
To secure transactions and prevent unauthorized access, it is highly recommended to:
1. Use HTTPS instead of HTTP.
2. Avoid using well known port numbers such as 80 and 443.
Figure 1 : Web UI Access Settings
3. The GRP allow access via SSH for advanced troubleshooting purpose. This is usually not needed
unless the administrator or Grandstream support needs it for troubleshooting purpose. SSH access
on the device is enabled by default with port 22 used. It’s recommended to disable it for daily normal
usage. If SSH access needs to be enabled, changing the port to a different port other than the well-
known port 22 is a good practice.

P a g e | 5
GRP26XX Security Manual
Admin Login
Username and password are required to log in the GRP’s web UI.
Figure 2 : Web UI Login
The factory default username for administrator level is “admin” and the default password is a random
password available on the sticker at the back of the unit. Changing the default password at first time login
is highly recommended.
When accessing the GRP phones for the first time or after factory reset, users will be asked to change the
default administrator password before accessing GRP Web interface.
To change the password for default user "admin", navigate to Web GUI → Maintenance →Web Access
Figure 3 : Change Password on First Boot

P a g e | 6
GRP26XX Security Manual
Figure 4: Change Admin Level Password
The password length must be between 6 and 25 characters. Strong password with a combination of
numbers, uppercase letters, lowercase letters, and special characters is always recommended for security
purpose.
User Management Levels
Two user privilege levels are currently supported:
•Admin
•User
User Level
Username
Password
Web Pages Allowed
User Level
user
123
Only Status and Basic Settings
Administrator Level
admin
Random password
available on the
sticker at the back of
the unit.
All pages
NOTES:
➢It is recommended to keep admin login for administrator only. And user should be provided with
user level login only, if web UI access is needed.
➢Change User Level Password upon the first login by following the below steps:
1. Access your GRP web UI by entering its IP address in your favorite browser.
2. Enter your admin password.
3. Go to Basic Settings → New User Password and Enter the new password.
4. Confirm the new password.
5. Press “Save” at the bottom of the page to save your new settings.

P a g e | 7
GRP26XX Security Manual
Figure 5 : Change User Level password

P a g e | 8
GRP26XX Security Manual
SECURITY FOR SIP ACCOUNTS AND CALLS
Protocols and Ports
By default, after a factory reset, all the accounts are active. Knowing the default local SIP port (Account1:
5060; Account2 : 5062 … ) users can make direct IP call even if the accounts are not registered to any PBX.
Therefore, it is recommended to disable the unused ports. Under Web GUI → Accounts → Account X →
General Settings → Account Active: “No”
➢Users can also disable Direct IP calls on all ports under Settings → Call Features: Set “Disable
Direct IP Call:” to “Yes”
•SIP transport protocol:
The GRP supports SIP transport protocol “UDP” “TCP” and “TLS”. By default, it’s set to “UDP”. It’s
recommended to use “TLS” so the SIP signaling is encrypted. SIP transport protocol can be configured
per Account under web UI → Accounts → Account X → SIP Settings → Basic Settings. When “TLS”
is used, we recommend using “sips” instead of “sip” for SIP URI scheme to ensure the entire SIP
transaction is secured instead of “best-effort”.
Figure 6 : Configure TLS as SIP Transport
SIP TLS certificate, private key and password can be configured under Maintenance → Security Settings
→ Security page:
Figure 7 : SIP TLS Settings

P a g e | 9
GRP26XX Security Manual
When SIP TLS is used, the GRP also offer additional configurations:
- Validate Server Certificates:
This feature allows users to validate server certificates with our trusted list of TLS connections
- Trusted CA Certificates: Uses the certificate for Authentication
Figure 8 : Additional SIP TLS Settings
•Local SIP port when using UDP/TCP:
Starting from 5060 for Account 1, the port numbers increase by 2 for each account. For example, 5062
is the default local SIP port for Account 2.
•Local SIP port when using TLS:
The SIP TLS port is the UDP SIP port plus 1. For example, if Account 1 SIP port is 5060, its TLS port
would be 5061.
Anonymous/Unsolicited Calls Protection
If the user would like to have anonymous calls blocked, please go to GRP’s Web GUI → Account X →
Call Settings and set “Anonymous Call Rejection “to “Yes” : The GRP will then reject all incoming calls
with anonymous caller ID by sending a “486 Busy here” message.
Figure 9 : Anonymous Call Rejection