Grandstream Networks GXV3275 User manual

GXV3275 Bluetooth User Guide
Grandstream Networks, Inc.
GXV3275 IP Multimedia Phone for AndroidTM
Bluetooth User Guide

GXV3275 Bluetooth User Guide
Page 1 of 16
GXV3275 Bluetooth User Guide
Index
INTRODUCTION ........................................................................................... 3
CONNECT TO BLUETOOTH ....................................................................... 4
TURN ON/OFF BLUETOOTH..............................................................................................................4
PAIR GXV3275 WITH A BLUETOOTH DEVICE..................................................................................5
UNPAIR ABLUETOOTH DEVICE .......................................................................................................8
BLUETOOTH CONFIGURATIONS .............................................................. 9
CHANGE BLUETOOTH DEVICE NAME FOR GXV3275....................................................................9
CONFIGURE VISIBILITY TIMEOUT..................................................................................................10
GXV3275 BLUETOOTH FEATURE - HEADSET MODE........................... 13
ENABLE HEADSET MODE...............................................................................................................13
PREDICTIVE DIALING......................................................................................................................15
ANSWER CALL.................................................................................................................................15
SWITCH DEVICE DURING CALL ..................................................................................................... 15

GXV3275 Bluetooth User Guide
Page 2 of 16
Table of Figures
GXV3275 Bluetooth User Guide
Figure 1: Turn On/Off Bluetooth from Settings............................................................................................ 4
Figure 2: Turn On/Off Bluetooth from Status Bar ........................................................................................ 5
Figure 3: Search for Devices....................................................................................................................... 6
Figure 4: Input Bluetooth Pairing Passcode................................................................................................7
Figure 5: Paired Device...............................................................................................................................7
Figure 6: Paired Device Details................................................................................................................... 8
Figure 7: Rename Option............................................................................................................................9
Figure 8: Enter New Name for Bluetooth Device ...................................................................................... 10
Figure 9: GXV3275 Bluetooth Visible to Nearby Bluetooth Devices ..........................................................11
Figure 10: Visibility Timeout Option...........................................................................................................12
Figure 11: Select Visibility Timeout............................................................................................................12
Figure 12: Enable Headset Mode ............................................................................................................. 14
Figure 13: BTAccount Displayed in Account Widget ................................................................................14
Figure 14: Predictive Dialing List...............................................................................................................15
Figure 15: Select Audio Channel............................................................................................................... 16

GXV3275 Bluetooth User Guide
Page 3 of 16
INTRODUCTION
Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances
from fixed and mobile devices, creating personal area networks with high level of security. The GXV3275
supports Bluetooth Class 2, version 4.0 + EDR. Users could use Bluetooth to transfer files, share contact
information with other Bluetooth portable devices, use Bluetooth headset for making calls, switch calls to
the GXV3275 from mobile devices using Bluetooth hands-free profile, and listen to media (music or other
audio output) from the GXV3275.
This document serves as an end user guide on how to use Bluetooth feature on the GXV3275. To learn
more about GXV3275's basic and advanced features, please visit http://www.grandstream.com/support to
download the latest "GXV3275 User Guide" and "GXV3275 Administration Guide".

GXV3275 Bluetooth User Guide
Page 4 of 16
CONNECT TO BLUETOOTH
To connect to a Bluetooth device, turn on GXV3275’s Bluetooth radio first. The first time when using a
new Bluetooth device with the GXV3275, "pair" the device with GXV3275 so that both devices know how
to connect securely to each other. After that, users could simply connect to a paired device.
TURN ON/OFF BLUETOOTH
1. On the GXV3275 idle screen, press MENU softkey on the bottom of the LCD to bring up the LCD
menu.
2. Select Settings .
3. Select Wireless & Network.
4. Tap on Bluetooth to turn it on/off.
Figure 1: Turn On/Off Bluetooth from Settings
Or, users could open the top status bar->System Settings and tap on Bluetooth icon to turn it on/off.

GXV3275 Bluetooth User Guide
Page 5 of 16
Figure 2: Turn On/Off Bluetooth from Status Bar
PAIR GXV3275 WITH A BLUETOOTH DEVICE
Before connecting GXV3275 with other Bluetooth devices, users must pair them first. They will stay
paired afterwards when Bluetooth is on unless they are manually unpaired on ether device.
1. On the GXV3275 idle screen, press MENU softkey on the bottom of the LCD to bring up the LCD
menu.
2. Select Settings .
3. Select Wireless & Network. Make sure Bluetooth is turned on.
4. Tap on Bluetooth settings.
5. Tap on the GXV3275 Bluetooth device name to make it visible to all nearly Bluetooth devices.
6. The GXV3275 scans and displays the IDs of all available Bluetooth devices within the range. If the
device you would like to pair with does not show up in the list, ensure that the other device is turned
on and set to be discoverable.
7. If the GXV3275 stops scanning before the other device is ready, press Menu button and select
"Search for devices".

GXV3275 Bluetooth User Guide
Page 6 of 16
Figure 3: Search for Devices
8. Once the Bluetooth device shows up in the scanning result, tap on it to start pairing.
9. Confirm the passkey in the prompted message (if any). If passcode is required, please refer to the
documentation for the Bluetooth device you are connected to or other procedures to obtain the
passcode.

GXV3275 Bluetooth User Guide
Page 7 of 16
Figure 4: Input Bluetooth Pairing Passcode
10. The paired device will be displayed in Bluetooth Settings screen.
Figure 5: Paired Device
Tap on it to make
the device visible.
Paired/connected
device shows here.

GXV3275 Bluetooth User Guide
Page 8 of 16
UNPAIR A BLUETOOTH DEVICE
1. On the GXV3275 LCD Bluetooth Settings screen (see [Figure 5: Paired Device]), tap on the
paired/connected Bluetooth device.
2. Users will see the details for the paired/connected device.
Figure 6: Paired Device Details
3. Tap on Unpair.

GXV3275 Bluetooth User Guide
Page 9 of 16
BLUETOOTH CONFIGURATIONS
CHANGE BLUETOOTH DEVICE NAME FOR GXV3275
The GXV3275 uses "GXV3275" as Bluetooth device name by default. The device name will be visible to
other devices when pairing/connecting them. Follow the steps below to change the Bluetooth device
name.
1. On the GXV3275 idle screen, press MENU softkey on the bottom of the LCD to bring up the LCD
menu.
2. Select Settings .
3. Select Wireless & Network. Make sure Bluetooth is turned on already.
4. Select Bluetooth settings.
5. Press Menu button and tap on "Rename phone".
Figure 7: Rename Option
6. Enter a name in the prompted window using the onscreen keyboard and tap on "Done".

GXV3275 Bluetooth User Guide
Page 10 of 16
Figure 8: Enter New Name for Bluetooth Device
CONFIGURE VISIBILITY TIMEOUT
User could adjust the visible time for the GXV3275 when Bluetooth is on. Visible time is the period the
GXV3275 will be seen on other Bluetooth devices’ searching list. During the visible time, other Bluetooth
devices could search and connect to the GXV3275 via Bluetooth.
1. On the GXV3275 idle screen, press MENU softkey on the bottom of the LCD to bring up the LCD
menu.
2. Select Settings .
3. Select Wireless & Network. Make sure Bluetooth is turned on.
4. Tap on Bluetooth settings.
5. Tap on device name (by default it's GXV3275) and the visible time will start to count down from the
configured timeout value.

GXV3275 Bluetooth User Guide
Page 11 of 16
Figure 9: GXV3275 Bluetooth Visible to Nearby Bluetooth Devices
6. To adjust the visible time of the GXV3275 Bluetooth, press Menu button under Bluetooth
Settings screen.
7. Tap on Visibility timeout.

GXV3275 Bluetooth User Guide
Page 12 of 16
Figure 10: Visibility Timeout Option
8. Select the interval you would like to set for the visibility timeout. Scroll up/down to view all timeout
options.
Figure 11: Select Visibility Timeout

GXV3275 Bluetooth User Guide
Page 13 of 16
GXV3275 BLUETOOTH FEATURE - HEADSET MODE
The GXV3275 supports Bluetooth hands-free profile, allowing users to connect cell phone to GXV3275
via Bluetooth and use the GXV3275 as headset for all calls to/from the cell phone. When connected and
enabled, the GXV3275 will show the BT profile for the connected cell phone on the idle screen account
widget.
Additionally, when using the GXV3275 dial pad to make a call from the BT profile, the dial pad will show
the contact information from the connected cell phone dynamically with the entered digits. This feature is
known as predictive dialing. It adds flexibility for users to dial on the GXV3275 to cell phone contacts from
the BT profile without additional contacts importing.
ENABLE HEADSET MODE
1. Please make sure the cell phone is paired and connected to the GXV3275 via Bluetooth already.
Please refer to section [CONNECT TO BLUETOOTH] for detailed information.
2. On the GXV3275 idle screen, press MENU softkey on the bottom of the LCD to bring up LCD
menu.
3. Tap on and select Wireless & Network->Bluetooth Settings.
4. Enable/Disable Headset mode by tapping on enable/disable headset mode. The switch on the right
side shows "ON" when it's enabled.

GXV3275 Bluetooth User Guide
Page 14 of 16
Figure 12: Enable Headset Mode
5. When Bluetooth "Headset Mode" is on, the BT account with the connected cell phone's number will
show up in the account widget on the idle screen.
Figure 13: BT Account Displayed in Account Widget

GXV3275 Bluetooth User Guide
Page 15 of 16
PREDICTIVE DIALING
When the GXV3275 and the Bluetooth device (cell phone) are being connected, usually a prompt will pop
up on the Bluetooth device (cell phone) to confirm whether or not to allow the GXV3275 to access the cell
phone's contacts and call history. If it's allowed, the GXV3275 can show predictive dialing list which is the
cell phone's contacts and call history information when users enter the digits in the GXV3275 dial pad.
The contact information will be dynamically updated with the digits entered.
1. On the GXV3275 idle screen, tap on the "BT Account" on the account widget.
2. Dial screen shows up. Users enter the digits using the key pad.
3. The contacts and call history in the cell phone that contain the entered digits will show up in the list
below.
4. Tap on one of the contacts you would like to call to select. Then dial out by tapping SEND key.
Figure 14: Predictive Dialing List
ANSWER CALL
1. When there is an incoming call to the cell phone, both the cell phone and the GXV3275 will ring at the
same time.
2. Answer the call on the GXV3275.
SWITCH DEVICE DURING CALL
When calling out or during the call, users can switch the device to be used for the call. This can be done
on the cell phone device.
"718" is entered in
the dial pad.
Contacts in the cell
phone containing
"718" show up in the
predictive dialing list.

GXV3275 Bluetooth User Guide
Page 16 of 16
The following picture shows iPhone interface when calling out. On the iPhone LCD, users can tap on
"GXV3275", "iPhone" or "Speaker" to select the device/audio channel to be used.
Figure 15: Select Audio Channel