Great Little Trading Greenaway Gallery User manual

1
Greenaway Gallery Bookcase
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
22/05/2018
V3
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• Adult assembly required.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• DO NOT let children climb or hang on drawers, doors or shelves.
• Max Shelf Loading: 5kgs.
• Wall xings not included. Please use appropriate xings that are
suitable for the wall type. If in doubt, please seek professional advice.
• Regularly check all xtures and ttings to ensure that they properly
tightened and tighten as necessary.
• Please retain these instructions for future reference.
• Made in China.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [email protected]
Thank you.

3
Component Check List
A B
1x Right Side Panel1x Left Side Panel
Component Check List
#1 #2
#3 #4
8x Cam Locks
14mm Diameter
8x Cam Dowels
35mmL
You will need (not supplied)
C D
4x Shelf Rods4x Shelves
#5
8x Bolts16x Wooden Dowels
20mmL
x4 Screws and Wall Plugs
(if appropriate) for your wall
type. See installation guide for
details.
1x Allen Key Philips Head Screwdriver
You will need (not supplied)

4
PLEASE READ BEFORE ASSEMBLING THE BOOKCASE:
Decide where you to intend to t the bookcase. Check the wall for pipes and cables
and ensure that you have a spirit level, pencil, tape measure, drill and drill bits to hand.
Take one of the side panels (either A or B), and place the panel with the outside
face at against the wall, whilst ensuring the narrow part of the keyhole xing slot is
uppermost. Ensure that the panel is vertically straight using the spirit level.
Mark the position of the centre of the narrow
part of the xing slots on the wall. Mark the
positions of both upper and lower keyhole
xing with a pencil.
Remove the side panel from the wall and using
the tape measure and spirit level, measure
784mm horizontally to mark the centres for
the other mounting points.
DO NOT DRILL THE WALLYET
Proceed with the building of the unit.
Installation Guide Installation Guide
Drill the holes in the wall and t the wall plugs (if using). Add the screws and ensure
that the head of the screw is sufciently proud of the wall to locate into the keyhole
xing slots.
Carefully offer up the bookcase to the 4 screws and once each is located correctly,
move the unit down to secure to the wall. Each screw head may need to be adjusted
in or out slightly to help with each location point.
ALL 4 KEYHOLE FIXINGS MUST BE USED TO LOCATE THE
BOOKCASE.
AFTER ASSEMBLING THE BOOKCASE:
Start by checking the measurements between all the centres of the keyhole xings
on the built bookcase are the same as those marked on the wall. If there is a slight
difference, re-measure and adjust the wall markings until you are satised that these are
all correct.
Hardware: You must use hardware that is suitable for the wall where the
bookcase is to be mounted. It is not provided.
Ensure you have 4 suitable length countersunk screws/hardware and that the heads of
the screw locate and slide up into the narrow part of the keyhole xing plates without
pulling out. If they are needed for your wall type, also ensure that you also have the
correct size wall plugs for the screws you are using and that you have the correct sized
drill bit to suit too.
The bookcase can hold up to 20kgs of books, so needs to be rmly xed to the wall.
If you are unsure, we recommend seeking professional advice before
proceeding further.
Hardware shown here are
for illustrative purposes only.
Your hardware may look
slightly different for your wall.
Wall
Surface
B

5
8x #3 Wooden Dowels
Hardware for Step 2:
4x #2 Cam Locks
Hardware for Step 1:
4x #1 Cam Dowels
STEP 2:
Attach the shelf panels C to the left side panel A with
x4 cam locks (#2).
Note:The lip of the shelf panels should be at the
front of panel A facing upwards.The back of panel A is
highlighted by the keyhole hooks.
STEP 3:
Attach the rods using x4 bolts (#4).
Hardware for Step 3:
4x #4 Bolts
STEP 4:
Insert x4 cam dowels (#1) to side panel B.
Hardware for Step 4:
4x #1 Cam Dowels
#1
STEP 1:
Insert x4 cam dowels (#1) and x8 wooden dowels (#3)
to side panel A.
DD
#1 #1
#3
#3
#1
#3
#3
#1
#3
#3
#1
#3
#3
A
C C C C
#2 #2 #2 #2 A
#4 #4 #4 #4
DD
A
#1 #1
B

6
STEP 5:
Position the right side panel B using x8 wooden dowels
(#3) and secure into place with x4 cam locks (#2).
STEP 7:
The bookcase is now ready to mount to the wall. Please refer to
the installation guide for wall mounting instructions.
Copyright© 2012 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
8x #3 Wooden Dowels
Hardware for Step 5:
4x #2 Cam Locks
STEP 6:
Secure the right side panel B using the remaining x4 bolts (#4).
Hardware for Step 6:
4x #4 Bolts
B
8x
#2
B
#4
#3
#2
#2 #2
#4#4#4