Great Little Trading L5014 User manual

1
Bridie Book & Toy Storage Unit
L5014
easy - medium - hard
Assembly Difculty
one person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
20/07/2020
V1

2
Safety Warnings:
• Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• DO NOT over load. Max weight 50Kg in total.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface.
• This product is heavy. We recommend that you build it where you are
planning to use it.
• Serious or fatal crushing injures can occur from furniture tipping over.
In order to prevent overturning, ensure you secure this furniture
product to the wall before you use it, using the anti-tip kit device
provided. If you have not yet received an anti-tip kit with your product
please contact customer services. You will need to source suitable
xings for your wall . If in doubt, please consult a qualied trades
person.
• Do not let children climb or hang on drawers, doors or shelves.
• Place the heaviest items in the lower drawers or shelves.
• Regularly check all xtures and ttings to ensure that they properly
tightened and tighten as necessary.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
EF
1x Side Panel
Component Check List Component Check List
1x Side Panel
1x Top Shelf 1x Shelf Panel
1x Base Panel 1x Front Panel
1x Central Divider Panel 1x Upper Back Panel
G H
J
I
1x Lower Back Panel 4x Wooden Legs
#1 #2
#3 #4
#5
You will need
(not supplied)
Philips Head Screwdriver
20x Cam Locks
26x Wooden Dowels
20x Cam Dowels
4x Leg Bolts
(25mm)
20x Back Panel Screws
(20mm) 1x Anti-Tip Kit

4
Hardware for Step 1:
STEP 1:
Working on a protective/carpeted surface, take panels D
& E and place with the small centrally placed drill holes
facing up.
Using a Phillips screwdriver, insert 2x cam dowels (#2)
into the outer holes on BOTH panels.
4x #2 Cam Dowels
STEP 2:
Starting with shelf panel D, orientate it so that the small drill holes on the long edge of
the panel are on the oor, now insert 2x wooden dowels (#3) in the holes next to the
cam dowels.
Orientate divider panel G as shown (with the angled edge facing up) and join to panel
D. Insert 2x cam locks (#1) into the large holes on panel G by the join and turn
clockwise to secure.
Now take base panel E and orientate so that the long edge with the groove is on the
oor. Insert 2x wooden dowels (#3) in the holes next to the cam dowels and join
with divider panel G. Insert 2x cam locks (#1) into the 2 holes on panel G and turn
clockwise to secure.
E
E
G
D
D
#2
#1
#1
#1
#1
#3
#3
#3
#2
#2
#2 #3
Hardware for Step 3:
4x #1 Cam Locks
4x #3 Wooden Dowels
Using Cam Locks:
When inserting into the panel, ensure
that each cam lock’s arrow is pointing
towards the drill hole on the side edge
of the panel & the dowel that it will be
receiving.
When the panels are in the connected
position, using a screwdriver, turn the
cam lock in a clockwise direction to
lock and secure.

5
STEP 3:
Lay side panels A & B on a protected surface and using a
Phillips screwdriver insert 8x cam dowels (#2) into the
smaller holes on BOTH panels.
STEP 4:
Take panel B and insert 9x wooden dowels (#3) into the remaining holes.
Take the part built panels (D/E/G) and place onto panel B as shown. Ensure the grooved edges
of panels B and E are meeting.
Now take front panel F and orientate with the large drill holes on the inside. Slide this panel
into place over the 2x cam dowels on the angled edge of panel B.
Now take top panel C and orientate so that the upstand is facing up. Connect with panel B and
ensure the groove along the long edge is meeting with the corresponding groove on panel B.
Now, insert 8x cam locks into the large drill holes on panels C, D, E & F that join with panel B
and turn clockwise to secure.
B
B
C
D
F
E
#2
#1
#1
#1
#1
#3
#3
#3
Hardware for Step 4:
8x #1 Cam Locks
9x #3 Wooden Dowels
#1
#1
#3
#3
#3
#3
#3
#3
#1
#1
#2
A
BASE
TOP
G
Hardware for Step 3:
16x #2 Cam Dowels
#2
#2
#2
#2
#2 #2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2

6
STEP 5:
Keeping the unit on its side, insert 9x wooden dowels (#3) into the inner holes of the shelf
edges.
Now take side panel A and join it to the unit, aligning all the cam dowels with their
corresponding holes.
When the panel is fully engaged, insert 8x cam locks (#1) into the remaining large drill holes
on the on panels C/D/E/F as shown and turn clockwise to secure.
STEP 6:
Keeping the unit on its side, attach the 4x legs (J).
Insert 1x wooden dowel (#3) into the smaller hole on EACH of the legs. Then position
the legs in the corners of the base panel using the dowels.
Fix the legs in place using 4x leg bolts (#4) that are inserted through the base panel.
Ensure the bolts are fully tightened.
Hardware for Step 5:
9x #3 Wooden Dowels
A
#3
#3
#3
#3
#3
#3
#3
#3
#3
#1
#1
Hardware for Step 6:
4x #4 Leg Bolts (25mm)
4x #3 Wooden Dowels
#3
#3
#3
#3
#4
#4
#4
#4
J
J
J
J
TOP
BASE
8x #1 Cam Locks
#1#1
#1
#1
#1
#1
C
D
FE

7
STEP 7:
Carefully stand the unit upright.
Take lower back panel I and x in place with 10x back panel screws (#5).
Ensure the holes in the panel are aligned with the pilot holes on the unit or you risk
splitting the panels.
Once panel I is in place, repeat the process with upper back panel H, again ensuring
the holes on the panels are aligned.
Hardware for Step 7:
20x #5 Back Panel Screws
(20mm)
1x Anti-Tip Kit
#5
H
I
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
NOTE:
There are 2 drill holes highlighted that are for
attaching the anti-tip kit brackets. Please use
the anti-tip kit provided to tether your unit
to the wall for safety.
Your unit is now ready to use.