Great Little Trading L1600 User manual

1
Abbeville Three Cube Unit &Bookshelf
A few important pointers before you start:
• Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if
of the tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to
be using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts and hardware.
Thank you for shopping with GLTC, we hope you enjoy having this
product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work,
then we do have an assembly company we can recommend: the
Flatpack Construction Company offers a nationwide service and can
be contacted on
one-person job 17/07/2017
V4
easy - medium - hard
www.gltc.co.ukwww.gltc.co.uk

2
Safety Warnings: Customer Service:
•
not begin assembly and do not use the item. Please contact
GLTC Customer Services on 0344 848 6000 immediately.
•We do stock spare hardware packs at our warehouse, so we should
be able to send you a replacement pack immediately if required.
Product Care:
•Wipe clean using a soft damp cloth followed by a dry cloth.
•Do NOT use cleaning products which contain ammonia, solvents orr
abrasive material.
•Do NOT expose the furniture to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know;
we’ll pass any helpful hints and tips on to other customers via our website
and update the instructions.
All you need to do is drop us a line at [email protected]
Thank you
Adult assembly required.
Assemble and use on a flat and level surface.
Children should be kept away from the product during assembly to avoid
any possible risk of injury.
Do not use power tools in the assembly of this product.
Cam dowels are used in the assembly of this unit. There is a natural stopping
point when turning, do not over-tighten.
Check fixtures and fittings regularly and tighten as necessary.
Serious or fatal crushing injuries can occur from furniture tipping over.
Ensure you secure this furniture product to the wall before you use it
using the kit provided. If you have not received an anti-tip kit with your
product please contact Customer Services.
Please retain these instructions for future reference.
•
•
•
•
•
•
•
•

3
#6
AAAA
G
C
B
D
EF
#7
#5
Component Check List: All Hardware Component Check List:
15x Screws
20 x Wooden Dowels
H
12mmL
#1 12 x Cam Dowels
36mmL
#2 12 x Cam Locks
15mmDia
#3 8 x Bolts
42mmL
#4 8 x Barrel Nuts
10mmDia
20mmL
1 x Allen Key
1 x Base Panel 1 x left Side Panel
1 x Right Side Panel
2 x Drawer Divider Panels
1 x Top Back Panel
1 x Horizontal Shelf Panel
1 x Top Panel
1 x Bottom Back Panel
You will need:
(not supplied)
Philips Head Screw Driver

4
STEP 1: Attach the drawer divider panels to
horizontal divider panels
Hardware for Step 1:
4x #1 Cam Dowels
Assembly:
8x #2 Cam Locks
8x
#5 Wooden Dowels
STEP 2: Attach the side panels
Hardware for Step 2:
4x #1 Cam Dowels
8
x #5 Wooden Dowels
8x #4 Barrel Nuts
Note:
Note: 1. Wooden dowels should fit snuggly and push in with your fingers. Do not use force
or a hammer as the wood may split.
2. Do not over-tighten the cam dowels.
Note: 1. Wooden dowels should fit snuggly and push in with your fingers. Do not use force
or a hammer as the wood may split.
2. Do not over-tighten the cam dowels.
Note:
Turn each of the cam locks
(#2) clockwise to lock them.
Turn each of the cam locks
(#2) clockwise to lock them.
#1
#5
#1
#2
#5
#5
#5
#5
#4
#4
B
D
C
D
E
E
#5
#2
#2
#5
#1
#5
#5
#5
#5

5
STEP 3: Attach the base panel
Hardware for Step 3:
8x #3 Bolts
1x #7 Allen Key
4x #5 Wooden Dowels
Hardware for Step 4:
Hardware for Step 5:
STEP 5: Attach the top panel
STEP 4: Prepare the top panel
4x 1# Cam Dowels
Turn each of the cam locks
(#4) clockwise to lock them.
#4
#2
#2
C
F
A
#3
#3
#3
#3
#3
#3
#3
#3
#3
4x #2 Cam Locks
#1
#1
#5
#5
#5
#5 #1
#1
Note: 1. Wooden dowels should fit snuggly and push in with your fingers.
Do not use force or a hammer as the wood may split.
2. Do not over-tighten the cam dowels.
F
#2
#2

6
STEP 6: Attach the back panels.
Please note that the 2x pilot holes indicated at
the top of the unit are to attach anti tip
straps included separately with this item.
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
G
© Copyright G.L.T.C. Ltd. 2015.
G.L.T.C. asserts all product design rights, all other intellectual property
and image rights including those contained in these instructions.
#6
#6
#6
Hardware for Step 6:
17x #6 Screws
H