Great Little Trading Stacking Storage User manual

1
04/07/2017
V4
easy - medium - hard one-person job
Stacking Storage -Single
A few important pointers before you start:
•It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
any site updates.
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
that all the components have been included in the pack; we find
the date and version number on the front of this leaflet against that of
everything is present and correct.
•Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll find details of the tools
you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.
Good luck!

2
Customer Service:
Safety Warnings:
•
•
•
•
•
•
•
•
•
Adult assembly required.
Unassembled product contains small parts which may present a choking
hazard.
Children should be kept away from the product during assembly to
avoid any possible risk of injury.
DO NOT use power tools in the construction of this product as there
is a risk of over-tightening and consequently splitting of the wood.
Assemble and use on a flat and level surface.
DO NOT stack more than 3 units high.
To avoid possible injury from tipping, do not allow children to climb on
this or multiple stacked units.
Serious or fatal crushing injuries can occur from furniture tipping over.
Ensure you secure this furniture product to the wall before you use it
using the kit provided. If you have not received an anti-tip kit with your
product please contact Customer Services.
Check fixtures and fittings regularly and tighten as necessary.
Please retain these instructions for future reference.
•
•
If you find that any components are missing or damaged, please do not
begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
•
•
•
Wipe clean using a soft damp cloth followed by a dry cloth.
DO NOT use cleaning products which contain ammonia, solvents or
abrasive material.
DO NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is any thing you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know;
we’ll pass any helpful hints and tips on to other customers via our website
and update the instructions.
All you need to do is drop us a line at [email protected]
Thank you

3
Component Check List
Step 1:
Attach left side panel A to base panel B
Hardware for Step 1:
2x #1 Bolts
2x #2 Barrel Nuts
Step 2:
Slide in the front panel C
A1x Left Side Panel 1x Base Panel
B
C1x Front Panel 1x Right Side Panel
D
E1x Back Panel 1x Top Panel
F
#1 4x Bolts #2
#3 #4
#5
4x Barrel Nuts
1x Allen Key
4x Cam Dowels 4x Cam Locks
You will need (not supplied)
Phillips Head Screwdriver
B
C
#1
#2
#2
A

Hardware for Step 5:
4
Step 4:
Slide in the back panel E & insert 4x cam locks as
shown with the arrow facing upwards
Step 6:
Attach the top panel F & secure by turning each cam lock clockwise to lock
Step 5:
Prepare the top panel F
D
F
E
F
#1
#1
#2
#3
#3
#3
#3
Step 3:
Attach the right side panel D to the base panel B
Hardware for Step 3:
2x #1 Bolts
2x #2 Barrel Nuts
4x #4 Cam Locks
Hardware for Step 4:
4x #3 Cam Dowels
#4
#4
#4
#4

5
Your unit is now ready to use.
Please be aware that we advise that safety straps are used to secure this to the
wall. For details on securing the unit to the wall see the anti-tip kit guidance.
Please note that we advise that if stacked, only the top unit is required to be
tethered to the wall. You may receive multiple anti-tip kits if multiple stacking
units are purchased.
© Copyright G.L.T.C. Ltd. 2011.
G.L.T.C. asserts all product design rights, all other intellectual property
and image rights including those contained in these instructions.