Great Little Trading Gulliver User manual

1
Gulliver Toy Storage
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
09/05/2018
V1
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• CAUTION Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface.
• This product is heavy.We recommend that you build it where you are
planning to use it.
• The maximum weight or load is 30 KGs.
• Regularly check all xtures and ttings to ensure that they properly
tightened.
• To avoid possible injury from tipping, DO NOT allow children to climb
on the product.
• Made in China.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you.

3
Component Check List
A B
Component Check List
#1 #2
#3 #4
You will need (not supplied)
C D
#5
Philips Head Screwdriver
EF
G H
I J
1x Allen Key
2x Cam Locks
14mm Diameter
2x Cam Dowels
32mmL
4x Bolts
42mmL
8x Wooden Dowels
#6
4x Wooden Dowels
21x Screws
25mmL 20mmL
25mmL
4x Legs

4
Hardware for Step 2:
Hardware for Step 1:
4x #1 25mmL Screws
STEP 2:
Attach panels (A) & (B) to divider panel (D) using 4 x
25mmL screws (#1).
STEP 3:
Insert 2 x wooden dowels (#2) and 2 x cam dowels (#4)
into the reverse of panel (D).
Insert 2 x cam locks (#5) into panels (E) & (F).
Hardware for Step 3:
2x #5 Cam Locks
STEP 4:
Slot panel (G) into the groves of panels (E) & (F).
STEP 1:
Attach side panels (A) & (B) to front panel (C) using 4 x 25mmL sc
Please ensure the pilot holes on panel C are facing down.
rews (#1).
A
B
C
#1
#1
#1
#1
#1
#1
#1
#1 D
4x #1 25mmL Screws
2x #2 Wooden Dowels
2x #4 Cam Dowels
A
B
C
B
#2
#4
#2
#4
#5
#5
E
D
F
G
D
F
E
B

5
STEP 5:
Attach panel (H) to edge of panels (E) & (F) using 4 x 25mmL screws (#1).
STEP 7:
Insert 6 x wooden dowels (#2) into edge of panels (H), (D) & (C).
Hardware for Step 5:
STEP 6:
Insert 4 x wooden dowels (#6) into base panel (J).
Attach 4 x wooden feet (I) to base panel (J) using 4 x 42mmL bolts (#3) and Allen Key.
Hardware for Step 6:
JI
4x #1 25mmL Screws
#3
#3
#3 #3
#6
#6
#6
#6
I
I
I
4x #6 Wooden Dowels
4x #3 Bolts
Hardware for Step 7:
6x #2 Wooden Dowels
#2
#2
#2
#2
#2
#2
STEP 8:
Attach base panel (J) using 9 x 25mmL screws (#1).
Hardware for Step 8:
9x #1 25mmL Screws
#1
#1
#1
#1
#1
#1
#1
#1
#1
J
H
D
B
J
H
B
Copyright© 2018 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
H
#1
#1 #1
#1
E
B
F