Great Little Trading L3909 User manual

1
Rackham Storage Tray
13/06/2016
V2
easy - medium - hard one-person job
L3909
A few important pointers before you start:
•It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
any site updates.
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•Make sure you have the right tools.Allen keys are provided if required,
you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
Good luck!

2
Safety Warnings:
•Adult assembly required.
•Unassembled product contains small parts which may present a
choking hazard.
•Children should be kept away from the product during assembly to
avoid any possible risk of injury.
•
•Always use the wall straps provided.
•
suitable for the wall type. If in doubt, please seek professional advice.
•To avoid possible injury from tipping - Do not allow children to climb
on this or multiple stacked units.
•Maximum weight load 12kg. Do not overload.
•
•Please retain these instructions for future reference.
Customer Service:
•
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
•We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
•Wipe clean using a soft damp cloth followed by a dry cloth.
•Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
•Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List Hardware for Step 1:
12x #1 dowels
Hardware for Step 2:
8x #1 dowels
STEP 2:
Insert 8x dowels (#1) into the end of panels (B). Place the internal divider
section within the front (C) and back panel (D) and line up the dowels.
A B
3 x Horizontal Central Divider Panels
DC
2 x Vertical Central Divider Panels
1 x Front Panel 1 x Back
E
2 x Handle Panels
You will need
(not supplied)
Phillips Head Screwdriver
20x Dowels
20mmL
8x Cam Dowels
35mmL
2x Anti Tip Straps
2x Screws
14mmL
#1 #2
#3 #4
#5
8x Cam Locks
14mm dia
1 x Base Panel
F
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
B
B
A
A
A
#1
#1
#1
#1
#1
#1
#1
#1
C
D
B
B
A
A
STEP 1:
Start by building the internal divider sections. Insert 2x dowels (#1) into the end
of each horizontal central divider (A). Place all three panels (A) facing upwards
and align the 2x vertical central divider panels (B) using the dowels.
A

4
Hardware for Step 3:
8x #2 35mmL cam dowels
#2
#2
#2
#2
E
#3
D
CE
#3
#3
#3
Copyright© 2016 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
E
#3
#3
#3
#3
D
C
D
#5
#4 #5
#4
STEP 3:
Insert 4x cam dowels (#2) into
both handle panels (E).
STEP 4:
Line up handle panel (E) with front and back panels
(C & D).Attach using 4x cam locks (#3) and tighten
with screwdriver.
F
B
STEP 5:
Slide base panel (F) into the
grooves as shown.
Hardware for Step 6:
4x #3 cam locks
Hardware for Step 7:
2x #5 14mmL screws
2x #4 anti tip straps
STEP 7:
Attach the 2x anti-tip straps (#4) to the back of the
storage tray using 2x 14mmL screws (#5). Attach the
your wall type.
STEP 6:
Attach the second handle panel (E) using 4x cam locks
(#3).Tighten with screwdriver.
Hardware for Step 4:
4x #3 Cam locks