Great Little Trading Abbeville L2992 User manual

1
A few important pointers before you start:
• Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if
of the tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to
be using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts and hardware.
easy - medium - hard two-person job 10/10/2018
V2
Thank you for shopping with GLTC, we hope you enjoy having this
product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work,
then we do have an assembly company we can recommend: the
Flatpack Construction Company offers a nationwide service and can
be contacted on
ku. ku.oc. oc.ctlg. ctlg.www www
Abbeville Eight Cube Unit
L2992

2
Safety Warnings:
• Adult assembly
• Do not let children climb this unit as it could tip and cause injury.
required.
•
• CHOKING HAZARD – This p
• Cam dowels are used in the assembly of this unit. There is a natural
stopping point when inserting, do not over-tighten.
roduct contains small parts and must
be assembled by an adult. Special care should be taken in the
unpacking and assembly of this item as unassembled parts may be
a choking hazard to children under 3 years old.
•During assembly, children should be kept away from the product
due to possible risk of injury.
• Do not use power tools in the construction of this product.
• This product is heavy, so we recommend that you build it where you
are planning to use it.
• All assembly fastenings should be tightened properly and
• Keep all relevant information for future reference.
Customer Service:
•
not begin assembly and do not use the item. Please contact
GLTC Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should
be able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which may contain ammonia,
solvents or abrasive material.
• Do NOT expose the furniture to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know;
we’ll pass any helpful hints and tips on to other customers via our website
and update the instructions.
All you need to do is drop us a line at [email protected]
Thank you
•2 person assembly required.
•Serious or fatal crushing injuries can occur from furniture tipping over.
Ensure you secure this furniture product to the wall before you use it
using the kit provided. If you have not received an anti-tip kit with your
product please contact Customer Services.

18 x Screws
16mmL
3
#1 #6 A
C
B
D
EF
#7
#2
#3
#4
Component Check List: All Hardware Component Check List:
18 x Cam Dowels
36mmL
1 x Right Side Panel
1 x Left Side Panel
3 x Horizontal Shelves
1 x Vertical Divider Panel
1 x Base Panel
2 x Back Panels
1 x Top Panel
18 x Cam Locks
9mmDia
slewoDnedooWx42
20mmL
6 x Screws
42mmL
1 x Allen Key
#5 6 x Barrel Nuts
10mmL
G
You will need:
(not supplied)
Philips Head Screwdriver

4
C
C
C
D
STEP 1: Slot shelves together STEP 2: Prepare the left side panel
A
#1
#1
#1
#1
#1
#1
#3
#3
#3
#3
#3
#3
Hardware for Step 2:
6x #3 Wooden Dowels
6x #1 Cam Dowels
Note: 1. Wooden dowels should fit snuggly and push in with your fingers.
2. Do not over-tighten the cam dowels.
Do not use force or a hammer as the wood may split.
Assembly:

A
C
C
CD
#2
#2
#2
#2
#2
#2
Turn each of the cam locks
(#2) clockwise to lock them.
5
Hardware for Step 3:
6x #2 Cam Locks
Hardware for Step 4:
6x #3 Wooden Dowels
6x #1 Cam Dowels
B
#1
#1
#1
#1
#1
#1
#3
#3
#3
#3
#3
#3
Note: 1. Wooden dowels should fit snuggly and push in with your fingers. Do not use force
or a hammer as the wood may split.
Step 3: Attach left side panel
Step 3: Prepare the right side panel
2. Do not over-tighten the cam dowels.

6
Hardware for Step 5:
6x #2 Cam Locks
A
B
#2
#2
#2
#2
#2
#2
Step 6: Attach the base
Step 5: Attach right side panel
Hardware for Step 6:
6x #4 Screws
6x #5 Barrel Nuts
E
B
A
#5
#5
#3
#4
#4
#4
#4
#4
6x#3 Wooden Dowels
Turn each of the cam locks(#2)
clockwise to lock them.
#5
#3
#3

7
Hardware for Step 7:
6x #3 Wooden Dowels
6x #1 Cam Dowels
#1
#1
#3
#3 #1
#1
#3
#1
#3 #3
#1
#3
F
Note: 1. Wooden dowels should fit snuggly and push in with your fingers.
Do not use force or a hammer as the wood may split.
Step 7: Prepare the top panel Step 8: Attach the top panel
F
Hardware for Step 8:
6x #2 Cam Locks
2. Do not over-tighten the cam dowels.
#2
#2
#2
#2
Note:
Turn each of the cam lock(#2)
clockwise to lock them.

G
#6
#6 #6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6 #6
#6
#6
#6
G
8
18x
Hardware for Step 9:
#6 Screws
Step 9:
Turn the unit over
Attach the back panels using screws (#6). Please note that
the 2x pilot holes indicated at the top of the unit are to
attach anti-tip straps included separately with this item.
Your unit is ready to use.
Attach the anti tip straps to the back of the unit using the remaining drill holes. For
details on securing the unit to the wall see the anti-tip kit guidance.