GU Electronic BENTLEY2012-TD User manual

BENTLEY2012-TD
- MODEL : HW Ver 0.7
- DATE : 2021.05.19

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x Vertual Analog Touch (Navigation System source)
- 1 x Uart Digital Touch (Navigation System source)
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
INTERFACE
CAR
COMMAND
SYSTEM CAN
EEPROM
CAN
RECEIVER
LVDS
TX
REAR CAMERA
POWER
REAR CAMERA
LVDS
LVDS
FRONT CAMERA COMPOSITE
NAVIGATION
SYSTEM
CAR
TFT-LCD
SUB
BOARD
RELAY

GU Electronic
3. Dimension
159mm * 83mm * 22mm
* This can change under manufacturer’s circumstance
159mm
83mm
22mm

GU Electronic
4. External Appearance
POWER/CAN Video
R-TOUCH
Digital
RGB
LCD-OUT
Rear
Camera
LED DIP S/W PROGRAM
NAVI
IMAGE

GU Electronic
4. External Appearance
POWER/CAN Video
R-TOUCH
Digital
RGB
LCD-OUT
Rear
Camera
DIP S/W
PROGRAM LED
NAVI
IMAGE

GU Electronic
5. Connector Pin Assignment
*NAVI Connect
① R DATA (Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ DMB IR (Green)
⑦ DVD IR (Orange)
①②③④⑤⑥⑦
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④
*POWER Connect
1. ACC (Red)
2. ACC (Red)
3. Rear-DET (Brown)
4. Front-DET (Blue)
5. CAN-L (Green)
6. CAN-H (Orange)
7. N.C
8. N.C
1 15
2 16
9. N.C
10. N.C
11. N.C
12. Rear-power (Red)
13. Front-power (Red)
14. Mode (Green)
15. GND (Black)
16. GND (Black)
* Rear-power & Front-power
-> Output Current = Max 0.2A(200mA)

GU Electronic
6. Product Composition
Interface 1 EA
RGB Navi Cable 1 EA
LVDS Cable(800mm) 1 EA
SUB Board 1 EA
OSD Board 1 EA
Power Cable 1 EA
Touch convertor Cable(KD-900) 1 EA
Mode S/W 1 EA
Mode Cable 1 EA
LVDS FPC Cable 3 EA
Touch FPC Cable(100mm) 2 EA
(100mm)
(130mm)
(150mm)
JIG Board 1 EA

GU Electronic
6. Product Composition
* CarPlay Set Sales(option) – KPLAY
Interface 1 EA AUX Cable 1 EA
Power Cable 1 EA HDMI Cable 1 EA
Microphone 1 EA
Bluetooth / Wifi Antenna 2EA

GU Electronic
6. Product Composition
CarPlay Main 1 EA AUX Cable 1 EA
Power Cable 1 EA
HDMI Cable 1 EA
* CarPlay(NV17) Set Sales(option)
Microphone 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6
CAR type SEL Right Picture7
8
* DIP S/W Example
BENTELY 2011~2017

GU Electronic
8. Mode Change
Mode Change
Return OEM dispaly mode change (Long press 1 second)

GU Electronic
9. Touch Control
Touch control - Calibration
+ Touch according to the shape coordinates.
OSD menu -> Utility -> Calibration

GU Electronic
9. Touch Control
DVB-T/DVD Control
Press Icon
DVB-T DVD

GU Electronic
10. OSD(On Screen Display) Control
OSD control
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN
Mode State
First Menu Second Menu Third Menu

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
RearCam AVM VIDEO
: Setting the Connected RearCam Model
Reset Execute Reset to default value of Config menu
OSD Config
10. OSD(On Screen Display) Control

GU Electronic
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
RearCam-Type OEM Original Camera
ExtDevice Equipped with external camera
RearCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Rear
camera mode
OFF + 12V off
RearCam-Det GEAR Detected by CAN
WIRE Detected by Rear-Det Wire
FrontCam-Type OEM Original Camera
ExtDevice Equipped with external camera
FrontCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Front
camera mode
OFF + 12V off
FrontCam-Det GEAR Detected by CAN
WIRE Detected by Front-Det Wire
FrontCam-RcvOpt ON After RearCam shows FrontCam
and returns to previous state
OFF Disable feature
UI DVB-T (DMB) ON DVB-T device control UI output
function
OFF Disable feature
UI DVD ON DVD device control UI output
function
OFF Disable feature
NAVI COM
HMS
FINE
:
Set up manufacturer of
woodworking device for UART
Touch use
OFF Do not use features.
Reset Execute Option Menu all Reset
10. OSD(On Screen Display) Control

0 second = FrontCam-RcvOpt menu OFF
1~30 second = FrontCam-RcvOpt menu ON & time control
GU Electronic
OSD Option -> FrontCam-RcvOpt
Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
Select time of display
1~30 second
10. OSD(On Screen Display) Control

GU Electronic
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu
DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>
10. OSD(On Screen Display) Control