GU Electronic HW Ver7.1 User manual

LandRover 2014 PAS
- MODEL : HW Ver7.1
- DATE : 2021.05.05

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x Vertual Analog Touch (Navigation System source)
- 1 x Uart Digital Touch (Navigation System source)
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
INTERFACE
CAR
COMMAND
SYSTEM CAN
EEPROM
CAN
RECEIVER
LVDS
TX
REAR CAMERA
POWER
REAR CAMERA
LVDS
LVDS
FRONT CAMERA COMPOSITE
NAVIGATION
SYSTEM
CAR
TFT-LCD
SUB
BOARD
RELAY

GU Electronic
3. Dimension
159mm * 83mm * 22mm
* This can change under manufacturer’s circumstance
159mm
83mm
22mm

GU Electronic
4. External Appearance
POWER/CAN Video
R-TOUCH
Digital
RGB
LCD-OUT
Rear
Camera
LED DIP S/W PROGRAM
NAVI
IMAGE

GU Electronic
4. External Appearance
POWER/CAN Video
R-TOUCH
Digital
RGB
LCD-OUT
Rear
Camera
DIP S/W
PROGRAM LED
NAVI
IMAGE

GU Electronic
5. Connector Pin Assignment
*NAVI Connect
① R DATA (Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ DMB IR (Green)
⑦ DVD IR (Orange)
①②③④⑤⑥⑦
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④
*POWER Connect
1. ACC (Red)
2. ACC (Red)
3. Rear-DET (Brown)
4. Front-DET (Blue)
5. CAN-L (Green)
6. CAN-H (Orange)
7. N.C
8. N.C
1 15
2 16
9. N.C
10. N.C
11. ACC-power (RED)
12. Rear-power (Red)
13. Front-power (Red)
14. Mode (Green)
15. GND (Black)
16. GND (Black)
* Rear-power & Front-power
-> Output Current = Max 200mA

GU Electronic
6. Product Composition
Interface 1 EA
RGB Navi Cable 1 EA
LVDS Cable(800mm) 1 EA
SUB Board 1 EA
FFC(100mm) 1 EA
OSD Board 1 EA
Power Cable 1 EA
Touch convertor Cable(KD-900) 1 EA

GU Electronic
6. Product Composition
* CarPlay Set Sales(option) – KPLAY
Interface 1 EA AUX Cable 1 EA
Power Cable 1 EA HDMI Cable 1 EA
Microphone 1 EA
Bluetooth / Wifi Antenna 2EA

GU Electronic
6. Product Composition
CarPlay Main 1 EA AUX Cable 1 EA
Power Cable 1 EA
HDMI Cable 1 EA
* CarPlay(NV17) Set Sales(option)
Microphone 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6
CAR type SEL Right Picture
7
8 N.C
* DIP S/W Example
Landrover
Range Rover 8”
Discovery Sports 2.0D SE 8” (2015)
Landrover
Evoque 8” (2014)
Jauar
F-face 8” (2014)
Landrover
Discovery4 3.0 SDV6 SE 7” (2015)
Landrover
Land Rover Discovery4 3.0D SE 7” (2013)
Jauar
7” (2014)
Capacitive-touch
Jauar
XF2.2 DL 7” (2014)
Capacitive-touch

GU Electronic
8. Mode Change
Mode Change Button - Range Rover
Return OEM dispaly mode change
Mode Change Button - Evoque

GU Electronic
8. Mode Change
Mode Change Button - FreeLander2
Return OEM dispaly mode change
Mode Change Button - Evoque

GU Electronic
8. Mode Change
Mode Change Button - Jaguar XF
Return OEM dispaly mode change
Mode Change Button - Jaguar XJL

GU Electronic
8. Mode Change
Mode Change Button - Jaguar F-FACE
Return OEM dispaly mode change

GU Electronic
9. Touch Control
Press and hold for more than 11 seconds on
NAVI, DVB-T, DVD screen.
(Note that it only works the first time after
switching screens)
+ Touch according to the shape coordinates
.
OR
OSD menu -> Utility -> Calibration
Touch control - Calibration

GU Electronic
9. Touch Control
DVB-T/DVD Control
Press Icon
DVB-T DVD

GU Electronic
10. OSD(On Screen Display) Control
OSD control
Mode State
First Menu Second Menu Third Menu
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
RearCam AVM VIDEO
: Setting the Connected RearCam Model
Reset Execute Reset to default value of Config menu
OSD Config
10. OSD(On Screen Display) Control