GU Electronic Dodge RAM 2019 TDC3 User manual

Dodge RAM 2019 TDC3
- DATE : 2020.10.17
- MODEL : HW Ver 02

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
-1 x Vertual Analog Touch (Navigation System source)
- 1 x Uart Digital Touch (Navigation System source)
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
LVDS
TX
INTERFACE
CAR
COMMAND
SYSTEM
LVDS
CAN
EEPROM
CAN
RECEIVER
LVDS
TX
CAR
TFT-LCD
LVDS
RX
RELAY
REAR CAMERA
POWER
REAR CAMERA
LVDS
LVDS
FRONT CAMERA COMPOSITE
NAVIGATION
SYSTEM
LVDS
RX

GU Electronic
3. Dimension
153mm * 93mm * 22mm
* This can change under manufacturer’s circumstance
153mm
93mm
22mm

GU Electronic
4. External Appearance
LCD-IN LCD-OUT
LED IMAGE DIP S/W
FRONT
PROGRAM
NAVIR-TOUCH
Digital
RGB
POWER/CAN
REAR

GU Electronic
4. External Appearance
LEDDIP S/W
PROGRAM IMAGE
NAVIR-TOUCH
Digital
RGB
POWER/CAN
LCD-IN
LCD-OUT
FRONT
REAR

GU Electronic
5. Connector Pin Assignment
*POWER Connect
1. Battery (Yellow)
2. Battery (Yellow)
3. Rear-DET (Brown)
4. Front-DET (Blue)
5. CAN-L (White)
6. CAN-H (Purple)
7. CAN-L (Blue)
8. CAN-H (Red)
1 15
2 16
9. CAN-L (Green))
10. CAN-H (Orange)
11. ACC-Power (Red)
12. Rear-Power (Red)
13. Front-Power (Red)
14. Mode (Green)
15. GND (Black)
16. GND (Black)
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④
*NAVI Connect
① R DATA (Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ DVB-T-IR (Green)
⑦ DVD-IR (Orange)
①②③④⑤⑥⑦
* Output current
- ACC POWER = Max 200mA
- REAR POWER = Max 200mA
- FRONT POWR = Max 200mA

GU Electronic
6. Product Composition
Interface 1 EA
Power Cable 1 EA
OSD Board 1 EA
LVDS Cable 1 EA
(Z-Type Extension)
Touch Converter Cable 1 EA
RGB NAVI Cable 1 EA

GU Electronic
6. Product Composition
* VHQ(Video High Quality Set Sales(option)
Interface 1 EA
Power Cable 1 EA
HDMI Cable 1 EA

GU Electronic
6. Product Composition
* HDMI-TO-DIGITAL Set Sales(option)
Interface 1 EA
Power Cable 1 EA
HDMI Cable 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6 N.C
7
CAR type SEL Right Picture
8
* DIP S/W Example
JEEP Grand Cherokee 8.4” 2019year
Resolution (1024*768)
DODGE RAM 12.0” 2019year
Resolution (800*1280)
JEEP Grand Cherokee 8.4” 2019year
Resolution (640*480)
DODGE RAM 12.0” 2019year
Resolution (800*1280)
Only USA version

Type A B
DIP-SW
Active size 800*526 800*640
Streeing Wheel
CAN ID=0x22D ID=0x318
GU Electronic
7. DIP S/W Setting
A type B type

GU Electronic
8. Mode Change
mode change : 1ms press

GU Electronic
9. Touch Control
Press and hold for more than 11 seconds on
NAVI, DVB-T, DVD screen.
(Note that it only works the first time after
switching screens)
+ Touch according to the shape coordinates
.
OR
OSD menu -> Utility -> Calibration
Touch control - Calibration

GU Electronic
9. Touch Control
DVB-T/DVD Control
Press Icon
DVB-T DVD

GU Electronic
9. Touch Control
Touch size
Interface
Touch
Size
OEM
Touch
Size

GU Electronic
10. OSD(On Screen Display) Control
OSD control
Mode State
First Menu Second Menu Third Menu
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
RearCam AVM VIDEO
: Setting the Connected RearCam Model
Reset Execute Reset to default value of Config menu
OSD Config
10. OSD(On Screen Display) Control

GU Electronic
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
NAVI COM
HMS
FINE
:
To use UART Touch, select a
navigation manufacturer.
OFF Do not use features.
RearCam-Type OEM Original Camera
ExtDevice Equipped with external camera
RearCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Rear
camera mode
OFF + 12V off
RearCam-Det GEAR Detected by CAN
WIRE Detected by Rear-Det Wire
FrontCam-Type OEM Original Camera
ExtDevice Equipped with external camera
FrontCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Front
camera mode
OFF + 12V off
FrontCam-Det GEAR Detected by CAN
WIRE Detected by Front-Det Wire
FrontCam-RcvOpt ON After RearCam shows FrontCam
and returns to previous state
OFF Disable feature
AV Mode
ON Use “REAR” video input port as
VIDOE input.
OFF Do not use features.
10. OSD(On Screen Display) Control