GU Electronic MB-PAS-190502 User manual

BENZ_W204(2010)-PAS-DC3
- MODEL : MB-PAS-190502
- DATE : 2021.08.17

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. I-DRIVE Control
9. OSD(On Screen Display) Control
10. Install Manual
11. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x LCD Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
LVDS
TX
INTERFACE
CAR
COMMAND
SYSTEM
LVDS
CAN
EEPROM
CAN
RECEIVER
LVDS
TX
CAR
TFT-LCD
LVDS
RX
RELAY
REAR CAMERA
POWER
REAR CAMERA
RGB+Sync
DIGITAL RGB LVDS
LVDS
FRONT CAMERA COMPOSITE

GU Electronic
3. Dimension
151mm * 83mm * 22mm
* This can change under manufacturer’s circumstance
151mm
83mm
22mm

GU Electronic
4. External Appearance
LVDS-IN
LVDS-OUT
LED DIP S/W PROGRAM
FRONT
IMAGE
REARNAVI
Digital
RGB
POWER/CAN

GU Electronic
4. External Appearance
LED
DIP S/W
PROGRAM IMAGE
LVDS-IN
LVDS-OUT
FRONT
REARNAVI
Digital
RGB
POWER/CAN

GU Electronic
5. Connector Pin Assignment
*NAVI Connect
① R DATA (Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ DVB-T-IR
⑦ DVD-IR
①②③④⑤⑥⑦
*POWER Connect
1. ACC (Red)
2. ACC (Red)
3. Rear-DET (Brown)
4. N.C
5. CAN1-L (Green)
6. CAN1-H (Orange)
7. CAN2-L (Blue)
8. CAN2-H (Red)
1 15
2 16
9. CAN3-L (White)
10. CAN3-H (Violet)
11. N.C
12. Rear-VCC (Red)
13. N.C
14. N.C
15. GND (Black)
16. GND (Black)

GU Electronic
6. Product Composition
LVDS Cable 1 EA
Interface 1 EA
Power Cable 1 EA
RGB NAVI Cable 1 EA

GU Electronic
6. Product Composition
* CarPlay Set Sales(option) – KPLAY
Interface 1 EA AUX Cable 1 EA
Power Cable 1 EA HDMI Cable 1 EA
Microphone 1 EA
Bluetooth / Wifi Antenna 2EA

GU Electronic
6. Product Composition
CarPlay Main 1 EA AUX Cable 1 EA
Power Cable 1 EA
HDMI Cable 1 EA
* CarPlay(NV17) Set Sales(option)
Microphone 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 CAN IN/OUT ON : Used
OFF : Not Used
6
CAR type SEL Right Picture7
8
* DIP S/W Example
7.0”Model
5.8”Model
* To use CarPlay, be sure to turn down Dip-sw 5.
2015year SL63 AMG 7.0”SplitView

GU Electronic
8. I-DRIVE Control
Mode Change
Long press to mode change
NAVI AV1 AV2OEM

GU Electronic
8. I-DRIVE Control
Benz I-Drive control : DVB-T(DMB) Control
①
- DVB-T UI off operation status
②Short press to channel Up
③Short press to channel Down
②Long press to SCAN
④⑤
- DVB-T UI on operation status
① Long press to DVB-T UI on
① Short press to Selection
④Move UI Left
⑤Move UI Right
②
③
DVB-T UI -> on/off selection to OSD MENU

GU Electronic
8. I-DRIVE Control
Benz I-Drive control : DVD Control
①
④⑤
②
③
- DVB-T UI on operation status
① Long press to DVB-T UI on
① Short press to Selection
④Move UI Left
⑤Move UI Right
DVD UI -> on/off selection to OSD MENU

GU Electronic
8. I-DRIVE Control
Benz I-Drive control : CarPlay Control
⑥
②
④⑤
①
⑦③
⑧⑨
① PUSH : Selection
② Moving left
③ Moving right
④ if Carplay, Track down
if Android auto, Moving right
⑤ if Carplay, Track up
if Android auto, Moving right
⑥ Moving up
⑦ Moving down
⑧ Long Press : Mode Change
Short Press : Back
⑨ Long Press : OSD menu on
Short Press : Siri call
* To use CarPlay, be sure to turn down Dip-sw 5.

GU Electronic
9. OSD(On Screen Display) Control
OSD control
ENTER
UP
DOWN
LEFT RIGHT
C Press for 6 seconds to turn on OSD
Press short to MENU EXIT
ENTER Item Selection, Value Selection
UP Item up
Increase selected value
RIGHT First->Second->Third Menu move
Third Menu에서 Item down
Increase selected value
DOWN Item down
Decrease selected value
LEFT Third->Second->First Menu move
Third Menu에서 Item up
Decrease selected value
Mode State
First Menu Second Menu Third Menu

GU Electronic
9. OSD(On Screen Display) Control
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
Reset Execute Reset to default value of Config menu
OSD Config

GU Electronic
9. OSD(On Screen Display) Control
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
NAVI COM
HMS
FINE
:
Set up manufacturer of
woodworking device for UART
Touch use
OFF Do not use features.
RearCam-Type OEM Original Camera
ExtDevice Equipped with external camera
RearCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Rear
camera mode
OFF + 12V off
RearCam-Det GEAR Detected by CAN
WIRE Detected by Rear-Det Wire
FrontCam-Type OEM Original Camera
ExtDevice Equipped with external camera
FrontCam-RcvOpt ON After RearCam shows FrontCam
and returns to previous state
OFF Disable feature
SteeringWheel Btn ON
To use the Streeing button You
must select the “ON" button in
the menu
OFF Do not use features.
UI DVB-T (DMB) ON DVB-T device control UI output
function
OFF Disable feature
UI DVD ON DVD device control UI output
function
OFF Disable feature
Reset Execute Option Menu all Reset

0 second = FrontCam-RcvOpt menu OFF
1~30 second = FrontCam-RcvOpt menu ON & time control
GU Electronic
9. OSD(On Screen Display) Control
OSD Option -> FrontCam-RcvOpt
Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
Select time of display
1~30 second