GU Electronic MASERATI-TD User manual

MASERATI-TD
- MODEL : MR-PAS-180418
- DATE : 2020.07.27

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x Vertual Analog Touch (Navigation System source)
- 1 x Uart Digital Touch (Navigation System source)
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to switch input mode through original button
- Possible to switch input mode through provided touch film(option)
- Possible to switch input mode through “HOME” button on screen

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
LVDS
TX
INTERFACE
CAR
COMMAND
SYSTEM
LVDS
CAN
EEPROM
CAN
RECEIVER
LVDS
TX
CAR
TFT-LCD
LVDS
RX
RELAY
REAR CAMERA
POWER
REAR CAMERA
LVDS
LVDS
FRONT CAMERA COMPOSITE
NAVIGATION
SYSTEM

GU Electronic
3. Dimension
146mm * 93mm * 21mm
* This can change under manufacturer’s circumstance
146mm
93mm
22mm

GU Electronic
4. External Appearance
LED DIP S/W LVDS IN
IMAGE PROGRAM LVDS OUT
POWER/CAN
FRONT
TOUCH
Analog
RGB
Digital
NAVI
Capacitive
Touch
REAR

GU Electronic
4. External Appearance
LED
DIP S/W
LVDS IN IMAGE
PROGRAM
LVDS OUT
POWER/CAN
FRONT
TOUCH
Analog
RGB
Digital
NAVI
Capacitive
Touch
REAR

GU Electronic
5. Connector Pin Assignment
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④
*POWER Connect
1. ACC (Red)
2. ACC (Red)
3. Rear-DET (Brown)
4. Front-DET (Blue)
5. CAN-L (Green)
6. CAN-H (Orange)
7. N.C
8. N.C
1 15
2 16
9. N.C
10. N.C
11. N.C
12. Rear-VCC (Red)
13. Front-VCC (Red)
14. Mode (Green)
15. GND (Black)
16. GND (Black)
*NAVI Connect
① R DATA (Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ DVB-T-IR
⑦ DVD-IR
①②③④⑤⑥⑦

GU Electronic
6. Product Composition
Interface 1 EA
Power Cable 1 EA
OSD Board 1 EA
RGB NAVI Cable 1 EA
Touch 변환 Cable(KD-900) 1 EA
LVDS-OUT Cable 1 EA
LVDS-IN Cable 1 EA
LVDS CONNTOR 1 EA
Mode S/W 1 EA

GU Electronic
6. Product Composition
* Touch Set Sales(option)
Option : TOUCH Board
Option : Touch Cable
Option : 7.0 inch
Capacitive
Touch Screen

GU Electronic
6. Product Composition
* CarPlay Set Sales(option) – KPLAY
Interface 1 EA AUX Cable 1 EA
Power Cable 1 EA HDMI Cable 1 EA
Microphone 1 EA
Bluetooth / Wifi Antenna 2EA

GU Electronic
6. Product Composition
CarPlay Main 1 EA AUX Cable 1 EA
Power Cable 1 EA
HDMI Cable 1 EA
* CarPlay(NV17) Set Sales(option)
Microphone 1 EA

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6
CAR type SEL Right Picture7
8
* DIP S/W Example
Quattroporte 2009~2013
GranTurismo 2009
GranTurismo MC

GU Electronic
8. Mode Change
Steering Wheel Button Control
mode change : 1’s press
DVB-T mode channel up
Carplay mode Track up
DVB-T mode channel down
Carplay mode Track down

GU Electronic
8. Mode Change
Touch screen - Gesture
Sliding the screen from left to right
for switching mode
OEM External
Sliding the screen from right to left for
switching mode
OEM External

GU Electronic
8. Mode Change
Touch screen – Home Icon
To use the home icon, it
must be ON in the OSD
menu.
On the interface screen, press the return icon on the right UI screen to switch the
OEM screen.

GU Electronic
9. Touch Control
Press and hold for more than 11 seconds on
NAVI, DVB-T, DVD screen.
(Note that it only works the first time after
switching screens)
+ Touch according to the shape coordinates
.
OR
OSD menu -> Utility -> Calibration
Touch control - Calibration

GU Electronic
9. Touch Control
DVB-T/DVD Control
Press Icon
DVB-T DVD

GU Electronic
10. OSD(On Screen Display) Control
OSD control
Mode State
First Menu Second Menu Third Menu
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
Reset Execute Reset to default value of Config menu
OSD Config
10. OSD(On Screen Display) Control