GU Electronic MR-PAS-T-160129 User manual

MASERATI-PAS-T
- MODEL : MR-PAS-T-160129
- DATE : 2020.08.25

GU Electronic
Index
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode Change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A

GU Electronic
1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Analog RGB Input (Navigation System output)
- 2 x A/V Input (External video source).
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x Vertual Analog Touch (Navigation System source)
- 2 x CVBS Output (Video out for Installing Headrest Monitor)
- 1 x Audio L/R Output.
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

GU Electronic
2. Block Diagram
Scaler
(PIP)
MCU
LVDS
TX
INTERFACE
CAR
COMMAND
SYSTEM
LVDS
CAN
EEPROM
CAN
RECEIVER
LVDS
TX
CAR
TFT-LCD
LVDS
RX
RELAY
NAVIGATION
SYSTEM
REAR CAMERA
POWER
REAR CAMERA
FRONT CAMERA COMPOSITE
COMPOSITE
CVBS1
CVBS2 MUX
RGB+Sync

GU Electronic
3. Dimension
146mm * 83mm * 21mm
* This can change under manufacturer’s circumstance
146mm
83mm
21mm

GU Electronic
4. External Appearance
LED DIP S/W LVDS IN
POWER/IE
A/V
MODE
Capacitive
Touch NAVI
RGB
NAVI
TOUCH
IMAGE PROGRAM LVDS OUT

GU Electronic
4. External Appearance
LED
DIP S/W
LVDS IN IMAGE
PROGRAM
LVDS OUT
POWER/IE
A/V
MODE
Capacitive
Touch NAVI
RGB
NAVI
TOUCH

GU Electronic
5. Connector Pin Assignment
*POWER Connect
① ACC (Red)
② CAN-H (Orange)
③ CAN-L (Green)
④ REAR-CAM DETECT (Brown)
⑤ FRONT-CAM DETECT (Blue)
⑥ REAR VCC (Red)
⑦ FRONT VCC (Red)
⑧ GND (Black)
*NAVI Connect
① R DATA (Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ DMB IR (Green)
⑦ DVD IR (Orange)
①②③④⑤⑥⑦
*Touch Connect
① Y-
② X-
③ Y+
④ X+
① ② ③ ④① ② ③ ④ ⑤ ⑥ ⑦ ⑧

GU Electronic
6. Product Composition
Interface 1 EA
A/V Cable 1 EA
Power Cable(8pin) 1 EA
RGB Navi Cable 1 EA
OSD Board 1 EA
Mode S/W 1 EA
LVDS-OUT Cable 1 EA
LVDS-IN Cable 1 EA
LVDS CONNTOR 1 EA
Touch Convertor Cable 1 EA

GU Electronic
6. Product Composition
* Capacitive Touch Sales(option)
Option : TOUCH Board
Option : Touch Cable
Option : 7.0 inch
Capacitive
Touch Screen

GU Electronic
7. DIP S/W Setting
* ON : DOWN , OFF : UP * DIP S/W Example
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T(AV1) ON : Not Used
OFF : Used
3 DVD(AV2) ON : Not Used
OFF : Used
4 N.C
5 N.C
6
CAR type SEL Right Picture7
8
Quattroporte 2009~2013
GranTurismo 2009
GranTurismo MC

GU Electronic
8. Mode Change
Steering Wheel Button Control
mode change : 1’s press
DVB-T mode channel up
DVB-T mode channel down

GU Electronic
8. Mode Change
Touch screen - Gesture
Sliding the screen from left to right
for switching mode
OEM External
Sliding the screen from right to left for
switching mode
OEM External

GU Electronic
8. Mode Change
Touch screen – Home Icon
To use the home icon, it
must be ON in the OSD
menu.
On the interface screen, press the return icon on the right UI screen to switch the
OEM screen.

GU Electronic
9. Touch Control
Press and hold for more than 11 seconds on
NAVI, DVB-T, DVD screen.
(Note that it only works the first time after
switching screens)
+ Touch according to the shape coordinates
.
OR
OSD menu -> Utility -> Calibration
Touch control - Calibration

GU Electronic
9. Touch Control
DVB-T/DVD Control
Press Icon
DVB-T DVD

GU Electronic
10. OSD(On Screen Display) Control
OSD control
Mode State
First Menu Second Menu Third Menu
MENU Press to display when there is no OSD
screen.
When OSD screen is on, press it to EXIT or
OFF.
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN

GU Electronic
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:Setting the Connected DVB-T Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
Reset Execute Reset to default value of Config menu
OSD Config
10. OSD(On Screen Display) Control

GU Electronic
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
RearCam-Type OEM Original Camera
ExtDevice Equipped with external camera
RearCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Rear
camera mode
OFF + 12V off
RearCam-Det CAN Detected by CAN
WIRE Detected by Rear-Det Wire
FrontCam-Type OEM Original Camera
ExtDevice Equipped with external camera
FrontCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Front
camera mode
OFF + 12V off
FrontCam-Det GEAR Detected by CAN
WIRE Detected by Front-Det Wire
HomeIcon ON Use the home icon feature.
OFF Disable feature
FrontCam-RcvOpt ON After RearCam shows FrontCam
and returns to previous state
OFF Disable feature
10. OSD(On Screen Display) Control

GU Electronic
OSD - Option Menu
First Menu Second Menu Third Menu Description
Option
StreeingWheelBtn ON Use the Streeing Wheel Button.
OFF Disable feature
Gesture ON Use the Gesture feature of
Capacitive Touch.
OFF Disable feature
UI DVB-T (DMB) ON DVB-T device control UI output
function
OFF Disable feature
UI DVD ON DVD device control UI output
function
OFF Disable feature
Reset Execute Option Menu all Reset
10. OSD(On Screen Display) Control