HiB Eris Slim 50 User manual

Fitting Instructions
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to
them during installation to ensure that your product is fitted safely
and that it retains its high quality finish.
ERIS SLIM
Eris Slim 50: Art No 48300
Eris Slim 60: Art No 48350
FI#02 028 R230530 Ver No. 1.0 Sept 2023

2
Warnings for Safe Use
• This product is intended for Domestic Use only.
• Please read the instructions and warnings carefully before installing the
product and ensure this document is kept with the product for future
reference to ensure product longevity and in the interest of safety.
• If you give the product to another person, please give them this manual as
well.
• If any modification is made it will invalidate the warranty and may render the
product unsafe.
• It is not suitable for use in saunas, steam rooms and shower cubicles.
• When drilling use appropriate eye protection.
• The use of a Residual Current Device (RCD) is advised for any power tools used
during the installation of this product.
• Take suitable precautions when handling glass.
• Beware of hidden cables or pipes. Take care if drilling on tiled surfaces in case
the drill slips.
• It is recommended that this product is installed by a person who is able to
meet the level of competence required in order to comply with relevant
regulations. If in doubt consult a qualified tradesperson.
• Do not use if glass is broken or unsafe.
• Do not overload shelves or unit.
• This product is designed for installation into a brick or masonry block wall,
if mounting onto other substrate ensure appropriate fixing and batons (if
required) are used and the load bearing of the wall is sufficient.
• It is recommended that this product is installed by two people.
• Dispose of packaging in accordance to local authority regulations.
• At end of life dispose of item according to local authority regulations.
What’s in the Box?
• Eris Slim Cabinet
• Glass shelves
• Mounting bracket
• Fittings pack

3
hib.co.uk
Tools Required
Figures
Pencil Spirit Level Drill Drill bit Screwdriver
Fig 1. - Hanging Bracket
Fig 2. - Mounting Points Fig 3. - Shelf bracket

4
Adjustment
Fing 4. - Door Adjustment
Fig 5. - Door Removal
Move door(s) up/down
Move door away/towards
the cabinet Move door(s) le/right

5
hib.co.uk
Installation
Before drilling, ensure that there are no hidden cables or pipes in the wall.
It is recommended that this product is installed by two people.
1. Position the cabinet in a suitable location. Carefully mark the top of the cabinet
when in the desired position using a so pencil, ensuring it is level.
2. Remove the cabinet from the wall and place on to a so surface, taking care not
to damage the mirror edges.
3. Measure the distance from the top of the cabinet to the mounting groove
located on the back of the cabinet. Using a spirit level, mark a horizontal line
below the pencil mark for the top of the cabinet. Place the bracket on the second
line and carefully mark the position of the holes using a so pencil, see Fig.1
4. Before drilling, ensure there are no hidden cables or pipes behind the
mounting point. Using a suitable drill bit, drill holes in the marked positions to a
suitable depth.
5. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface,
wall plugs should be inserted below the tile surface to avoid cracking. NB. For
plasterboard walls, specialist fixings should be purchased from any DIY or
hardware store.
6. Fix the brackets to the wall using the screws provided.
7. Temporarily hang the cabinet on the brackets, see Fig. 2, to mark the position
of the internal fixing hole, then remove the cabinet. Using a suitable drill bit, drill a
hole and insert a wall plug as per stage 5.
8. Rehang the cabinet in position and secure the base of the cabinet with the
supplied screw(s) and screw cap(s).
9. To install the glass shelving, place the shelf fixings provided at the required
level on each internal side of the cabinet.
10. Position the glass shelf in the fixings and secure in place by tightening the
screw on the underside of the shelf fixing, see Fig.3. Do this for all fixings to
secure the glass shelf in position.

Care
Aftercare
In the unlikely event that this product should fail please contact the retailer
from which the item was purchased.
To preserve the high quality finish of your HiB product, please ensure you
regard the following care and cleaning recommendations:
• Avoid leaving excessive standing and surface water on the product for
prolonged periods of time.
• Clean the product with water and a so cloth, a mild detergent may be
used if required. Ensure any excess moisture is removed aer use.
• Do not use abrasive sponges or cleaning agents.
WEEE compliance
Must not be mixed with
general household waste
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try
and make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary.
E & OE.
T: [phone] F: [phone] E: [e-mail] hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN