HIK VISION DS-K1T605 Series User manual

Face Recognion Terminal
UD07930B-E

Legal Informaon
User Manual
©2019 Hangzhou Hikvision Digital Technology Co., Ltd.
About this Manual
This Manual is subject to domesc and internaonal copyright
protecon. Hangzhou Hikvision Digital Technology Co., Ltd.
("Hikvision") reserves all rights to this manual. This manual
cannot be reproduced, changed, translated, or distributed,
parally or wholly, by any means, without the prior wrien
permission of Hikvision.
Please use this user manual under the guidance of professionals.
Trademarks
and other Hikvision marks are the
property of Hikvision and are registered trademarks or the
subject of applicaons for the same by Hikvision and/or its
aliates. Other trademarks menoned in this manual are the
properes of their respecve owners. No right of license is given
to use such trademarks without express permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
REGARDING THIS MANUAL. HIKVISION DOES NOT WARRANT,
GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR
RELIABILITY OF INFORMATION CONTAINED HEREIN. YOUR USE OF
THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE
OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION
SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING
FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT
THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored
and processed. To protect data, the development of Hikvision
i

devices incorporates privacy by design principles. For example,
for device with facial recognion features, biometrics data is
stored in your device with encrypon method; for ngerprint
device, only ngerprint template will be saved, which is
impossible to reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and
transfer data in accordance with the applicable data protecon
laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as,
implemenng reasonable administrave and physical security
controls, conduct periodic reviews and assessments of the
eecveness of your security controls.
ii

Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
iii

Contents
1 Regulatory Informaon ............................................. 1
2 Safety Instrucon ..................................................... 2
3 Overview .................................................................. 3
3.1 Overview ............................................................... 3
3.2 Features ................................................................ 4
4 Appearance .............................................................. 5
5 Installaon ............................................................... 8
5.1 Installaon Environment ....................................... 8
5.2 Install with Gang Box (Wall Mounng) ................. 8
5.3 Install without Gang Box (Wall Mounng) ............ 9
6 Wiring ..................................................................... 10
6.1 Wire Device ......................................................... 10
6.2 Wire Secure Door Control Unit ........................... 11
7 Acvaon ............................................................... 11
7.1 Acvate via Device .............................................. 12
7.2 Acvate via SADP ................................................ 12
7.3 Acvate Device via Client Soware .................... 13
8 Basic Operaon ...................................................... 14
8.1 Login ................................................................... 14
8.2 Communicaon Sengs ..................................... 14
8.2.1 Set Network Parameters ............................ 14
8.2.2 Set Wi-Fi Parameters ................................. 15
8.2.3 Set RS-485 Parameters .............................. 15
8.2.4 Set Wiegand Parameters ........................... 16
8.3 User Management .............................................. 16
8.3.1 Add Face Picture ........................................ 16
8.3.2 Add Fingerprint .......................................... 18
8.3.3 Add Card .................................................... 19
iv

8.3.4 Add Password ............................................ 19
8.3.5 Set Authencaon Mode .......................... 20
8.3.6 Search and Edit User .................................. 21
8.4 Import and Export Data ...................................... 21
8.4.1 Export Data ................................................ 21
8.4.2 Import Data ............................................... 22
8.5 Time and Aendance Status Sengs ................. 22
8.5.1 Set Manual Aendance ............................. 22
8.5.2 Set Auto Aendance .................................. 23
8.5.3 Set Manual and Auto Aendance ............. 24
8.5.4 Disable Aendance Mode ......................... 24
8.6 Identy Authencaon ....................................... 24
8.6.1 Authencate via 1:1 Matching .................. 25
8.6.2 Authencate via Other Types .................... 25
8.7 System Sengs ................................................... 25
8.7.1 Set Basic Parameters ................................. 26
8.7.2 Set Face Picture Parameters ...................... 27
8.7.3 Set Fingerprint Parameters ........................ 28
8.7.4 Set Time ..................................................... 28
8.8 Set Access Control Parameters ........................... 29
8.9 Maintenance ....................................................... 30
8.9.1 Upgrade Firmware ..................................... 30
8.9.2 Data Management ..................................... 31
8.9.3 Log Query .................................................. 32
8.9.4 Test ............................................................ 32
8.10 View System Informaon .................................. 33
9 Client Soware Conguraon ................................. 34
9.1 Person Management ........................................... 34
9.1.1 Add Organizaon ....................................... 34
9.1.2 Congure Basic Informaon ...................... 34
v

9.1.3 Issue a Card to One Person ........................ 35
9.1.4 Upload a Face Photo from Local PC ........... 36
9.1.5 Take a Photo via Client ............................... 36
9.1.6 Collect Face via Access Control Device ...... 37
9.1.7 Collect Fingerprint via Client ..................... 38
9.1.8 Collect Fingerprint via Access Control Device
............................................................................. 38
9.1.9 Congure Access Control Informaon ....... 39
9.1.10 Customize Person Informaon ................ 40
9.1.11 Congure Resident Informaon .............. 40
9.1.12 Congure Addional Informaon ............ 41
9.1.13 Import and Export Person Idenfy
Informaon ......................................................... 41
9.1.14 Import Person Informaon ...................... 41
9.1.15 Import Person Pictures ............................ 42
9.1.16 Export Person Informaon ...................... 43
9.1.17 Export Person Pictures ............................. 43
9.1.18 Get Person Informaon from Access Control
Device ................................................................. 44
9.1.19 Move Persons to Another Organizaon
............................................................................. 44
9.1.20 Issue Cards to Persons in Batch ............... 44
9.1.21 Report Card Loss ...................................... 45
9.1.22 Set Card Issuing Parameters .................... 45
9.2 Congure Schedule and Template ...................... 46
9.2.1 Add Holiday ............................................... 46
9.2.2 Add Template ............................................. 47
9.3 Set Access Group to Assign Access Authorizaon to
Persons ..................................................................... 49
9.4 Congure Advanced Funcons ........................... 50
9.4.1 Congure Device Parameters .................... 50
9.4.2 Congure Remaining Open/Closed ........... 56
vi

9.4.3 Congure Mul-Factor Authencaon ...... 58
9.4.4 Congure Custom Wiegand Rule ............... 60
9.4.5 Congure Card Reader Authencaon Mode
and Schedule ...................................................... 61
9.4.6 Congure First Person In ............................ 62
9.4.7 Congure An-Passback ............................ 63
9.4.8 Congure Mul-door Interlocking ............. 63
9.4.9 Congure Other Parameters ...................... 64
9.5 Congure Linkage Acons for Access Control ..... 70
9.5.1 Congure Client Acons for Access Event
............................................................................. 70
9.5.2 Congure Device Acons for Access Event
............................................................................. 71
9.5.3 Congure Device Acons for Card Swiping
............................................................................. 72
9.5.4 Congure Device Linkage for Mobile
Terminal's MAC Address ..................................... 73
9.5.5 Congure Device Acons for Person ID ..... 74
9.6 Door/Elevator Control ......................................... 75
9.6.1 Control Door Status ................................... 76
9.6.2 Control Elevator Status .............................. 76
9.6.3 Check Real-Time Access Records ............... 77
9.7 Time and Aendance .......................................... 78
9.7.1 Congure Aendance Parameters ............. 78
9.7.2 Add Timetable ........................................... 83
9.7.3 Add Shi .................................................... 84
9.7.4 Manage Shi Schedule .............................. 84
9.7.5 Manually Correct Check-in/out Record ..... 87
9.7.6 Add Leave and Business Trip ...................... 88
9.7.7 Calculate Aendance Data ........................ 89
9.7.8 Aendance Stascs ................................. 90
A. Tips for Scanning Fingerprint ................................. 93
vii

B. Tips When Collecng/Comparing Face Picture ....... 94
C. Relaonship between Device Height, Person Height,
and Standing Distance ............................................... 96
D. Tips for Installaon Environment ........................... 97
E. Dimension ............................................................. 98
viii

1 Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable
harmonized European standards listed under
the EMC Direcve 2014/30/EU, RE Direcve
2014/53/EU,the RoHS Direcve 2011/65/EU
2012/19/EU (WEEE direcve): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
1

designated collecon points. For more
informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may include
leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the
baery to your supplier or to a designated
collecon point. For more informaon
see:www.recyclethis.info
(1) 이 기기는 가정용으로 전자파적합등록을 한 기기로서 주거
지역에서는 물론 모든 지역에서 사용할 수 있습니다。
(2) 당해 무선설비는 전파혼신 가능성이 있으므로 인명안전과
관련된 서비스는 할 수 없음。
Model Manufacturer Standard
C2000IC12.0-24P-DE MOSO Power Supply
Technology Co., Ltd. CEE
ADS-24S-12 1224GPG Shenzhen Honor
Electronic Co., Ltd. CEE
C2000IC12.0-24P-GB MOSO Power Supply
Technology Co., Ltd. BS
2 Safety Instrucon
These instrucons are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precauon measure is divided into Dangers and Cauons:
Dangers: Neglecng any of the warnings may cause serious injury
or death.
Cauons: Neglecng any of the cauons may cause injury or
equipment damage.
Dangers: Follow these safeguards
to prevent serious injury or death.
Cauons: Follow these precauons
to prevent potenal injury or
material damage.
Danger:
•All the electronic operaon should be strictly compliance with
the electrical safety regulaons, re prevenon regulaons and
other related regulaons in your local region.
•Please use the power adapter, which is provided by normal
company. The power consumpon cannot be less than the
required value.
•Do not connect several devices to one power adapter as
adapter overload may cause over-heat or re hazard.
•Please make sure that the power has been disconnected
before you wire, install or dismantle the device.
2

•When the product is installed on wall or ceiling, the device
shall be rmly xed.
•If smoke, odors or noise rise from the device, turn o the
power at once and unplug the power cable, and then please
contact the service center.
•If the product does not work properly, please contact your
dealer or the nearest service center. Never aempt to
disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
Cauons:
•Do not drop the device or subject it to physical shock, and do
not expose it to high electromagnesm radiaon. Avoid the
equipment installaon on vibraons surface or places subject
to shock (ignorance can cause equipment damage).
•Do not place the device in extremely hot (refer to the
specicaon of the device for the detailed operang
temperature), cold, dusty or damp locaons, and do not
expose it to high electromagnec radiaon.
•The device cover for indoor use shall be kept from rain and
moisture.
•Exposing the equipment to direct sun light, low venlaon or
heat source such as heater or radiator is forbidden (ignorance
can cause re danger).
•Do not aim the device at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfuncon however), and aecng the endurance of sensor
at the same me.
•Please use the provided glove when open up the device cover,
avoid direct contact with the device cover, because the acidic
sweat of the ngers may erode the surface coang of the
device cover.
•Please use a so and dry cloth when clean inside and outside
surfaces of the device cover, do not use alkaline detergents.
•Please keep all wrappers aer unpack them for future use. In
case of any failure occurred, you need to return the device to
the factory with the original wrapper. Transportaon without
the original wrapper may result in damage on the device and
lead to addional costs.
•Improper use or replacement of the baery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used baeries according to the instrucons
provided by the baery manufacturer.
•Biometric recognion products are not 100% applicable to
an-spoong environments. If you require a higher security
level, use mulple authencaon modes.
3 Overview
3.1 Overview
Face recognion terminal is a kind of access control device for
face recognion, which is mainly applied in security access
3

control systems, such as logisc centers, airports, university
campuses, alarm centrals, dwellings and so on.
3.2 Features
•High performance processor with deep learning algorithm
•Authencates by swiping Mifare card or EM card according to
dierent models
•Live face detecon: Only live face can be detected and
authencated
•Face capacity: 3200
•Max. 5000 ngerprints storage
Note
Some device models do not support ngerprint related
funcons.
•Mulple authencaon modes
Note
Some device models do support authencang by ngerprint.
•1:1 and 1:N matching by comparing face pictures and
ngerprints
Note
Some device models do support authencang by ngerprint.
•5-inch LCD touch screen to display operaon interface, etc.
•Voice prompt
•Dual-lens camera: one camera for receiving visible light and the
other one for receiving infrared light
•Standard denion
•Face picture recognion and face picture capture funcon
•Supports TCP/IP, Wi-Fi , RS-485 communicaon and Wiegand
communicaon
•Switches between input and output when communicang by
Wiegand protocol; Supports output card No. via Wiegand
communicaon
•Connects to external access controller or one external card
reader via RS-485 communicaon
•Connects to external access controller or Wiegand card reader
via Wiegand communicaon
•Connects to secure door control unit to avoid the door opening
when the terminal is destroyed
•Supports imporng and exporng data via USB ash drive
•Stand-alone operaon
•Supports an-passback, mulple authencaons, and open
door with rst card
•Remotely controls via the client soware
•Power supply by lithium baery
4

Note
Some device models do not support the funcon.
•Hardware inializaon
4 Appearance
You can view the device appearance introducon and their
descripons.
Refer to the following contents for detailed informaon of the
face recognion terminal.
Figure 4-1 Appearance of Face Recognion Terminal
Table 4-1 Descripon of Face Recognion Terminal
No. Name Descripon
1 Indicator
Solid Red:
Standby.
Flashing Red:
Authencaon
failed.
Solid Green:
Authencaon
completed.
Flashing Green:
Authencang
(combined).
2
Fingerprint
Module + Card
Swiping Area
Scan ngerprint
or swipe card.
Note
Only the device
with the
5

No. Name Descripon
ngerprint
module
contains this
part.
Card Swiping
Area
Swipe card
within this area.
Note
Only the device
without the
ngerprint
scanning
funcon
contains this
part.
3 Sensor
Detect the
illuminaon
intensity. When
the environment
is too dark, the
device will
enable the
supplement light
automacally.
4 Display Screen
5-inch LCD touch
screen with the
resoluon of
800*480.
5Supplement
Light
Support white
light and IR light.
Maximum
distance for
supplement
light: 1m.
6 Camera Support bi-
spectrum.
7 Loudspeaker
The part that the
sound comes
from.
8 Doorbell Buon
Hold the buon
for 3s to power
on and the
device indicator
will light up.
Aer seng the
power buon
6

No. Name Descripon
funcon, hold
the doorbell
buon for 3s to
power o.
Note
For details
about seng
the power
buon funcon,
see System
Sengs.
9 USB Interface
Plug in the USB
ash drive and
you can import
or export the
data.
10 Wiring Terminals Connect to other
external devices.
11 Reset
While the device
is powering on,
hold the reset
buon and the
device will
restore to the
factory sengs.
12 TAMPER
When the
tamper buon is
pressed down
and the tamper-
proof funcon is
enabled. If the
device is pulled
down, the alarm
will be triggered.
You should input
the device
acvaon
password to
dismiss the
alarm.
13 Network
Interface
Connect to
Ethernet.
7

No. Name Descripon
14 Power Interface Connect to
power supply.
15 Baery
Connector
Connect to
baery.
5 Installaon
5.1 Installaon Environment
•Install the device at least 2 meters away from the light, and at
least 3 meters away from the window or the door.
•Make sure the environment illuminaon is more than 100 Lux.
Note
For details about installaon environment, see Tips for
Installaon Environment.
5.2 Install with Gang Box (Wall Mounng)
You can install the terminal with gang box on the wall or other
surfaces.
Steps
1. According to the baseline on the mounng template, sck the
mounng template on the wall or other surface, 1.1 meters
higher than the ground.
Figure 5-1 Mounng Template
2. Drill holes on the wall or other surface according to the
mounng template and install the gang box (80 mm × 80 mm).
3. Use two supplied screws to secure the mounng plate on the
gang box.
4. Remove the two screws at the boom of the device.
5. Align the terminal with the mounng plate and buckle them
together.
6. Use a hex wrench to fasten the two screws at the boom.
8

Note
•The installaon height here is the recommended height. You
can change it according to your actual needs.
•For easy installaon, drill holes on mounng surface
according to the supplied mounng template.
Figure 5-2 Installaon with Gang Box Diagram
5.3 Install without Gang Box (Wall Mounng)
You can install the terminal without gang box on the wall or other
surfaces.
Steps
1. According to the baseline on the mounng template, sck the
mounng template on the wall or other surface, 1.1 meters
higher than the ground.
Figure 5-3 Mounng Template
2. Drill holes on the wall or other surface according to the
mounng template.
3. Insert the screw sockets of the setscrews in the drilled holes.
Figure 5-4 Insert Screw Socket
9

4. Align the two holes to the mounng plate with the drilled
holes.
5. Fix and fasten the screws in the sockets on the wall or other
surface.
6. Remove the two screws at the boom of the device.
7. Align the terminal with the mounng plate and buckle them
together.
8. Use a hex wrench to fasten the two screws at the boom.
Note
•The installaon height here is the recommended height. You
can change it according to your actual needs.
•For easy installaon, drill holes on mounng surface
according to the supplied mounng template.
Figure 5-5 Installaon without Gang Box Diagram
6 Wiring
You can connect the RS-485 terminal with the RS-485 card reader,
connect the DOOR terminal with the door lock, connect the
BUT/GND terminal with the exit buon, connect the ALARM OUT/
ALRM IN terminal with the alarm output/input devices, and
connect the WIEGAND terminal with the Wiegand card reader or
the access controller. You can also connect the DS_IN can with the
power supply.
If connect the WIEGAND terminal with the access controller, the
face recognion terminal can transmit the authencaon
informaon to the access controller and the access controller can
judge whether to open the door or not.
Note
•If you use 1.0 mm cables, you should use a 12V switched-mode
power supply. And the distance between the power supply and
the device should be no more than 20 m.
•If you use 1.5 mm cables, you should use a 12V switched-mode
power supply. And the distance between the power supply and
the device should be no more than 30 m.
•If you use 2.0 mm cables, you should use a 12V switched-mode
power supply. And the distance between the power supply and
the device should be no more than 40 m.
6.1 Wire Device
You can connect the terminal with peripherals.
The wiring diagram without secure door control unit is as follows.
10

Figure 6-1 Device Wiring
Note
•You should set the face recognion terminal's Wiegand
direcon to "Input" to connect to a Wiegand card reader. If
connects to an access controller, you should set the Wiegand
direcon to "Output" to transmit authencaon informaon to
the access controller.
•For details about Wiegand direcon sengs, see Seng
Wiegand Parameters in Communicaon Sengs.
•The Min. power cable's diameter: 18 AWG.
•The power cable's rated current is 3 A, while other cable's
rated current is 1 A.
6.2 Wire Secure Door Control Unit
You can connect the terminal with the secure door control unit.
The wiring diagram is as follows.
Figure 6-2 Secure Door Control Unit Wiring
Note
The secure door control unit should connect to an external power
supply separately.
7 Acvaon
You should acvate the device before the rst login. Aer
powering on the device, the system will switch to Device
Acvaon page.
Acvaon via the device, SADP tool and the client soware are
supported.
The default values of the device are as follows:
11