HIK VISION DS-K2600-G Series User manual

DS-K2600-G Series Access Controller
User Manual
UD05678B

Access Controller·User Manual
i
User Manual
© 2017 Hangzhou Hikvision Digital Technology Co., Ltd.
This manual is applied for access controller.
Product Name
Serials
Access
Controller
DS-K2601-G Serials Access Controller
DS-K2602-G Serials Access Controller
DS-K2604-G Serials Access Controller
It includes instructions on how to use the Product. The software embodied in the Product is
governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision
Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are registered
trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other
trademarks mentioned in this manual are the properties of their respective owners. No right of
license is given to use such trademarks without express permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Support
Should you have any questions, please do not hesitate to contact your local dealer.

Access Controller·User Manual
ii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the R&TTE Directive 1999/5/EC, the EMC Directive 2014/30/EU, the LVD
Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Access Controller·User Manual
iii
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•A factory recommended HDD should be used for this device.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the manufacturer.

Access Controller·User Manual
iv
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger
or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical safety regulations,
fire prevention regulations and other related regulations in your local region.
Please use the power adapter, which is provided by normal company. The power consumption
cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause over-heat
or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle
the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for the detailed
operating temperature), cold, dusty or damp locations, and do not expose it to high
electromagnetic radiation. The appropriate operation temperature is 0℃to +45℃, and the
storage temperature should be -10℃to +55℃.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or
radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at the
same time.
Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the fingers may erode the surface coating of the device
cover.
Warnings
Follow these
safeguards to
prevent
serious injury
or death.
Cautions Follow
these precautions
to prevent
potential injury or
material damage.

Access Controller·User Manual
v
Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage on the device and lead to additional costs.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used batteries according to the instructions provided by
the battery manufacturer.

Access Controller·User Manual
vi
Table of Contents
Chapter 1 Product Description .................................................................................................1
1.1 Overview ..............................................................................................................................1
1.2 Main Features ......................................................................................................................1
Chapter 2 Component Description ...........................................................................................3
Chapter 3 Terminal Connection................................................................................................5
3.1 Terminal Description ............................................................................................................5
3.1.1 DS-K2601-G-GTerminal Description .................................................................................5
3.1.2 DS-K2602-GTerminal Description.....................................................................................7
3.1.3 DS-K2604-G Terminal Description..................................................................................10
Chapter 4 Card Reader Installation.........................................................................................14
4.1 External Terminal ...............................................................................................................14
4.1.1 DS-K2601-G External Terminals......................................................................................14
4.1.2 DS-K2602-G External Terminals......................................................................................14
4.1.3 DS-K2604-G External Terminals......................................................................................14
4.2 Card Reader Installation.....................................................................................................15
4.2.1 The Connection of Wiegand Card Reader......................................................................15
4.2.2 RS485 Card Reader Connection .....................................................................................16
4.3 Installing E-Lock..................................................................................................................17
4.3.1 Installation of Cathode Lock...........................................................................................17
4.3.2 Installation of Anode Lock..............................................................................................17
4.4 Connecting the External Alarm Device ..............................................................................18
4.5 Door Button Wiring Diagram .............................................................................................18
4.6 The Connection of Magnetics Detection ...........................................................................19
4.7 Connecting Power Supply ..................................................................................................19
4.8 Arming Region Input Terminal ...........................................................................................20
4.8.1 Connecting Normally Open Detector.............................................................................20
4.8.2 Connecting Normally Closed Detector...........................................................................20
4.9 Fire Alarm Module Wiring .................................................................................................21
Chapter 5 Settings .................................................................................................................22
5.1 Initializing the Hardware ....................................................................................................22
5.2 Relay Input NO/NC .............................................................................................................22
5.2.1 Lock Relay Output ..........................................................................................................22
5.2.2 Alarm Relay Output Status .............................................................................................23
Chapter 6 Activating the Access Control Terminal...................................................................25

Access Controller·User Manual
vii
6.1 Activating via SADP Software .............................................................................................25
6.2 Activating via Client Software ............................................................................................26
Chapter 7 Client Operation ....................................................................................................29
7.1 Function Module................................................................................................................29
7.2 User Registration and Login ...............................................................................................32
7.3 System Configuration .........................................................................................................33
7.4 Access Control Management .............................................................................................34
7.4.1 Adding Access Control Device ........................................................................................35
7.4.2 Viewing Device Status....................................................................................................49
7.4.3 Editing Basic Information ...............................................................................................50
7.4.4 Network Settings............................................................................................................51
7.4.5 Capture Settings.............................................................................................................53
7.4.6 RS-485 Settings...............................................................................................................54
7.4.7 Wiegand Settings ...........................................................................................................55
7.4.8 M1 Card Encryption .......................................................................................................55
7.4.9 Remote Configuration ....................................................................................................56
7.5 Person and Card Management ..........................................................................................63
7.5.1 Organization Management ............................................................................................64
7.5.2 Person Management......................................................................................................65
7.6 Schedule and Template ......................................................................................................74
7.6.1 Week Schedule...............................................................................................................75
7.6.2 Holiday Group ................................................................................................................76
7.6.3 Template.........................................................................................................................77
7.7 Permission Configuration...................................................................................................79
7.7.1 Adding Permission..........................................................................................................80
7.7.2 Applying Permission.......................................................................................................81
7.8 Advanced Functions ...........................................................................................................81
7.8.1 Access Control Parameters.............................................................................................82
7.8.2 Card Reader Authentication...........................................................................................84
7.8.3 Multiple Authentication.................................................................................................86
7.8.4 Open Door with First Card .............................................................................................89
7.8.5 Anti-Passing Back ...........................................................................................................90
7.8.6 Cross-Controller Anti-passing Back ................................................................................91
7.8.7 Multi-door Interlocking..................................................................................................94
7.8.8 Authentication Password ...............................................................................................95
7.8.9 Custom Wiegand............................................................................................................96

Access Controller·User Manual
viii
7.9 Searching Access Control Event .........................................................................................98
7.10 Access Control Event Configuration ...................................................................................99
7.10.1 Access Control Event Linkage .....................................................................................99
7.10.2 Access Control Alarm Input Linkage.........................................................................101
7.10.3 Event Card Linkage ...................................................................................................101
7.10.4 Cross-Device Linkage................................................................................................103
7.11 Door Status Management ................................................................................................105
7.11.1 Access Control Group Management ........................................................................105
7.11.2 Anti-control the Access Control Point (Door)...........................................................106
7.11.3 Status Duration Configuration .................................................................................108
7.11.4 Real-time Card Swiping Record ................................................................................109
7.11.5 Real-time Access Control Alarm...............................................................................110
7.12 Arming Control.................................................................................................................111
Appendix A Sound Prompt and Indicator ................................................................................ 113
Appendix B Custom Wiegand Rule Descriptions...................................................................... 114

Access Controller·User Manual
1
Chapter 1Product Description
1.1 Overview
DS-K2600-G is a powerful and stable access controller, using the logical architecture design.
DS-K2600-G is designed with TCP/IP network interface and its signal processed with special
encryption and can be run offline. Anti-tampering function is also supported.
1.2 Main Features
The access controller is equipped with 32-bit high-speed processor
Supports TCP/IP and GPRS network communication, Ehome accessing. The communication
data is specially encrypted to relieve the concern of privacy leak
Support recognition and storage of card number with maximum length of 20
The access controller can store 100 thousand legal cards (97 thousand normal cards and 3
thousand visitor cards) and 300 thousand card swiping records
Supports multi-door interlock function, anti-passback function, multi-card function, first card
open function, super card and super password function, M1 card encryption, online upgrade
function and remote control of the doors
Supports tamper-proof alarm for card reader, alarm for door not secured, force opening door
alarm, alarm for door opening timeout, duress card and code alarm, blacklist alarm and alarm
for illegal card swiping attempts reaching the limit
The alarm input of controller supports short circuit protection function and cut-proof function
Multiple event upload methods: channel, center group, and listening
50 event and card linkages
IP address conflict detection
Cross-controller anti-passing back function (For cross-controller anti-passing back based on
card, wire the card reader with RS-485. For cross-controller anti-passing back based on network,
connect the server and device properly. Up to 5000 cards’swiping records can be stored in the
selected server.) and inner-device anti-pass-back function
Supports RS485 interface and Wiegand interface for accessing card reader. RS485 interface
adopts dual-interface design and supports loop breakpoint detection and redundancy function;
Wiegand interface supports W26, W34 and is seamlessly compatible with third-party card
reader with Wiegand interface
Supports various card types as normal/ disabled/ blacklist/ patrol/ guest/ duress/ super card,
etc.
Various indicators to show different status
Supports time synchronization via NTP, manual or automatic method
Supports record storage function when it is offline and insufficient storage space storage alarm
function

Access Controller·User Manual
2
The access controller has backup battery design, watchdog design and tamper-proof function
Data can be permanently saved after the access controller is powered off.
Supports I/O linkage, and event linkage
Supports Ehome protocol, and inter-network communication
500 groups of password under the authentication mode of card and password

Access Controller·User Manual
3
Chapter 2Component Description
Take DS-K2604-G as an example, the component schematic diagram is shown below.
No.
Component Description
DS-K2601-G
DS-K2602-G
DS-K2604-G
1
Alarm Relay Output Status (NC/NO)
2
Network Data Indicator
3
RS-485 Communication Indicator
4
Network Status Indicator
5
Door Relay Output Status (NC/NO) Choice
6
Battery Charging Indicator
7
Power Indicator
8
Charging Completing Indicator

Access Controller·User Manual
4
No.
Component Description
9
Running Indicator
10
Hardware Initialization and Normal Working Choice
11
Main board dial-up switch/ Reserved

Access Controller·User Manual
5
Chapter 3Terminal Connection
3.1 Terminal Description
3.1.1 DS-K2601-G Terminal Description
DS-K2601-G Terminal descriptions are as follows:
No.
DS-K2601-G
A1
Lock Power
GND
Grounding
A2
+12V
Power Output of the Lock
A3
Card Reader Power
GND
Grounding
A4
+12V
Power Output of the Head Read
A5
Wiegand Card Reader 2
GND
Grounding
A6
W0
Wiegand Head Read Data Input Data0
A7
W1
Wiegand Head Read Data Input Data1
A8
BZ
Card Reader Buzzer Control Output
A9
ERR
Indicator of Card Reader Control
Output (Invalid Card Output)

Access Controller·User Manual
6
No.
DS-K2601-G
A10
OK
Indicator of Card Reader Control
Output (Valid Card Output)
A11
Wiegand Card Reader 1
GND
Grounding
A12
W0
Wiegand Head Read Data Input Data0
A13
W1
Wiegand Head Read Data Input Data1
A14
BZ
Card Reader Buzzer Control Output
A15
ERR
Indicator of Card Reader Control
Output (Invalid Card Output)
A16
OK
Indicator of Card Reader Control
Output (Valid Card Output)
B1
Arming Region Input
Z1
Arming Region Access Terminal 1
(Only for Linkage of Alarm Relay
Output)
B2
GND
Grounding
B3
Z2
Arming Region Access Terminal 2
(Only for Linkage of Alarm Relay
Output)
B4
Z3
Arming Region Access Terminal 3
(Only for Linkage of Alarm Relay
Output)
B5
GND
Grounding
B6
Z4
Arming Region Access Terminal 4
(Only for Linkage of Alarm Relay
Output)
B7
E-Lock
D1+
Door 1 Door Relay Input (Dry Contact)
B8
D1-
B9
Door Contact Input
S1
Door 1 Door Contact Detector Input
B10
GND
Grounding
B11
Door Open Button
B1
Door 1 Door Open Button Input
B12
GND
Grounding
C1
Power
+12V
DC12V Cathode
C2
GND
DC12V Grounding Input
C3
Battery
BAT+
DC12V Battery Cathode
C4
BAT-
DC12V Battery Anode
C5
485 Card Reader
RS 485A+
Card Reader RS485+ Access
C6
RS 485A-
Card Reader RS485- Access
C7
GND
Grounding
C8
RS 485B+
Card Reader RS485+
C9
RS 485B-
Card Reader RS485-
C10
GND
Grounding
C11
Access Controller RS485
Interface
RS 485C+
Uplink RS485+Communication
C12
RS 485C-
Uplink RS485-Communication
C13
GND
Grounding

Access Controller·User Manual
7
No.
DS-K2601-G
C14
RS 485D+
Reserved
C15
RS 485D-
C16
GND
C17
Alarm Output
NO/NC1
Alarm Relay 1 Output (Dry Contact)
C18
COM1
C19
NO/NC2
Alarm Relay 2 Output (Dry Contact)
C20
COM2
D1
Event Input
C2
Event Alarm Input 2
D2
GND
Grounding
D3
C1
Event Alarm Input 1
3.1.2 DS-K2602-G Terminal Description
DS-K2602-G Terminal descriptions are as follows:
No.
DS-K2602-G
A1
Power for E-Lock
GND
Grounding
A2
+12V
Power Output of the Lock
A3
Power for Card Reader
GND
Grounding

Access Controller·User Manual
8
No.
DS-K2602-G
A4
+12V
Power Output of the Head Read
A5
Wiegand Card Reader
4
GND
Grounding
A6
W0
Wiegand Head Read Data Input Data0
A7
W1
Wiegand Head Read Data Input Data1
A8
BZ
Card Reader Buzzer Control Output
A9
ERR
Indicator of Card Reader Control Output (Invalid
Card Output)
A10
OK
Indicator of Card Reader Control Output (Valid
Card Output)
A11
Wiegand Card Reader
3
GND
Grounding
A12
W0
Wiegand Head Read Data Input Data0
A13
W1
Wiegand Head Read Data Input Data1
A14
BZ
Card Reader Buzzer Control Output
A15
ERR
Indicator of Card Reader Control Output (Invalid
Card Output)
A16
OK
Indicator of Card Reader Control Output (Valid
Card Output)
A17
Wiegand Card Reader
2
GND
Grounding
A18
W0
Wiegand Head Read Data Input Data0
A19
W1
Wiegand Head Read Data Input Data1
A20
BZ
Card Reader Buzzer Control Output
A21
ERR
Indicator of Card Reader Control Output (Invalid
Card Output)
A22
OK
Indicator of Card Reader Control Output (Valid
Card Output)
A23
Wiegand Card Reader
1
GND
Grounding
A24
W0
Wiegand Head Read Data Input Data0
A25
W1
Wiegand Head Read Data Input Data1
A26
BZ
Card Reader Buzzer Control Output
A27
ERR
Indicator of Card Reader Control Output (Invalid
Card Output)
A28
OK
Indicator of Card Reader Control Output (Valid
Card Output)
B1
Arming Region
Z1
Arming Region Access Terminal 1 (Only for
Linkage of Alarm Relay Output)
B2
GND
Grounding
B3
Z2
Arming Region Access Terminal 2 (Only for
Linkage of Alarm Relay Output)
B4
Z3
Arming Region Access Terminal 3 (Only for
Linkage of Alarm Relay Output)
B5
GND
Grounding
B6
Z4
Arming Region Access Terminal 4 (Only for
Linkage of Alarm Relay Output)

Access Controller·User Manual
9
No.
DS-K2602-G
B7
E-Lock1
D1+
Door 1 Door Relay Input (Dry Contact)
B8
D1-
B9
E-Lock2
D2+
Door 2 Door Relay Input (Dry Contact)
B10
D2-
B11
Door Magnetics
Detector
S1
Door 1 Magnetic Detector Input
B12
GND
Signal Grounding
B13
S2
Door 2 Magnetic Detector Input
B14
Door Button
B1
Door 1 Door Button Input
B15
GND
Signal Grounding
B16
B2
Door 2 Door Button Input
C1
Power
+12V
DC12V Cathode
C2
GND
Grounding
C3
Battery
BAT+
DC12V Battery Cathode
C4
BAT-
DC12V Battery Anode
C5
Card Reader 485
Interface
RS
485A+
Card Reader RS485+ Access
C6
RS
485A-
Card Reader RS485- Access
C7
GND
Grounding
C8
RS
485B+
Card Reader RS485+
C9
RS
485B-
Card Reader RS485-
C10
GND
Grounding
C11
RS-485 Interface
RS
485C+
Uplink RS485+Communication
C12
RS
485C-
Uplink RS485-Communication
C13
GND
Grounding
C14
RS
485D+
Reserved
C15
RS
485D-
C16
GND
C17
Alarm Output
NO/N
C1
Alarm Relay 1 Output (Dry Contact)
C18
COM1
C19
NO/N
C2
Alarm Relay 2 Output (Dry Contact)
C20
COM2
C21
NO/N
C3
Alarm Relay 3 Output (Dry Contact)
C22
COM3

Access Controller·User Manual
10
No.
DS-K2602-G
C23
NO/N
C4
Alarm Relay 4 Output (Dry Contact)
C24
COM4
D1
Event Input
C4
Event Alarm Input 4
D2
GND
Grounding
D3
C3
Event Alarm Input3
D4
C2
Event Alarm Input 2
D5
GND
Grounding
D6
C1
Event Alarm Input 1
3.1.3 DS-K2604-G Terminal Description
DS-K2604-G Terminal descriptions are as follows:
No.
DS-K2604-G
A1
Power Supply
of E-Lock
GND
Grounding
A2
+12V
Power Supply of E-Lock Output
A3
Power Supply
of Card Reader
GND
Grounding
A4
+12V
Power Supply of Card Reader Output

Access Controller·User Manual
11
No.
DS-K2604-G
A5
Wiegand Card
Reader 4
GND
Grounding
A6
W0
Wiegand Card Reader Data Input Data0
A7
W1
Wiegand Card Reader Data Input Data1
A8
BZ
Buzzer of Card Reader Control Output
A9
ERR
Cresset of Card Reader Control Output (Invalid
Card Output)
A10
OK
Cresset of Card Reader Control Output (Valid Card
Output)
A11
Wiegand Card
Reader 3
GND
Grounding
A12
W0
Wiegand Card Reader Data Input Data0
A13
W1
Wiegand Card Reader Data Input Data1
A14
BZ
Buzzer of Card Reader Control Output
A15
ERR
Cresset of Card Reader Control Output (Invalid
Card Output)
A16
OK
Cresset of Card Reader Control Output (Valid Card
Output)
A17
Wiegand Card
Reader 2
GND
Grounding
A18
W0
Wiegand Card Reader Data Input Data0
A19
W1
Wiegand Card Reader Data Input Data1
A20
BZ
Buzzer of Card Reader Control Output
A21
ERR
Cresset of Card Reader Control Output (Invalid
Card Output)
A22
OK
Cresset of Card Reader Control Output (Valid Card
Output)
A23
Wiegand Card
Reader 1
GND
Grounding
A24
W0
Wiegand Card Reader Data Input Data0
A25
W1
Wiegand Card Reader Data Input Data1
A26
BZ
Buzzer of Card Reader Control Output
A27
ERR
Cresset of Card Reader Control Output (Invalid Card
Output)
A28
OK
Cresset of Card Reader Control Output (Valid Card
Output)
B1
Arming Region
Input
Z1
Arming Region Access Terminal 1 (Only for Linkage of
Alarm Relay Output)
B2
GND
Grounding
B3
Z2
Arming Region Access Terminal 2 (Only for Linkage of
Alarm Relay Output)
B4
Z3
Arming Region Access Terminal 3 (Only for Linkage of
Alarm Relay Output)
B5
GND
Grounding
B6
Z4
Arming Region Access Terminal 4 (Only for Linkage of
Alarm Relay Output)