Hitron CGNM-3550 User manual

Hitron CGNM-3550 Installation Guide
Internet

Package Contents
2.
HITRON CGNM3550
INTERNET MODEM
Package Contents
ETHERNET CABLE
Connect to select devices.
(Feature not supported)
Pinhole button to turn WiFi
ON or OFF.
(Should only be used with the guidance
of a Comwave Tech Support)
Connect provided Ethernet
cable to any one of the
Ethernet (LAN) ports.
Connect cable jack internet
line here. (Cable not provided)
Connect provided Power
Adapter cable here.
1USB
3
2
Ethernet
(1 to 4)
4
Reset
5
Cable
Power
Adapter
POWER ADAPTER
Items may not be
exactly as shown.
3
2
1
4
5

3.
LED Light Indicators
Power
Downstream (DS)
Upstream (US)
Online
LAN
Wireless (2.4GHZ)
Wireless (5GHZ)
USB
Please follow the step-by-step instructions
on the following pages.

4.
Installation Diagram
Power Bar
with Surge Protector
Comwave
Home Phone Adapter
Telephone
Internet
Modem
Computer
Cable Jack
Internet
Outlet
7
step
6
step
2
step
4
step
Continue to 1
step
5
step

5.
Installation Step-by-Step
1
step To begin installation, shut down your computer.
2
step Connect the Comwave Internet Modem using the Cable Jack connection.
3
step Connect the supplied Power Adaptor to the POWER port and plug into power
bar. Note: Wait until the (Online) LED Light Indicator on your Comwave
Internet Modem is steady green and operational. This may take up to 5 minutes.
4
step Connect the supplied Ethernet Cable from the LAN port of the Comwave
Internet Modem to your computer.
Start your computer. You should be able to browse the Internet instantly.
For Home Phone Connection
5
step Connect the supplied Ethernet Cable from the LAN port of your Comwave
Internet Modem to the WAN port of the Home Phone Adapter.
6
step Connect a telephone to the PHONE 1 port on the Home Phone Adapter.
7
step Connect the Comwave Home Phone Adapter to a power outlet and wait 5
minutes for a dial tone. DO NOT DISCONNECT POWER as it may damage the
Home Phone Adapter.
Test your phone line, you should have a dial tone and be able to make calls.
Can’t Access
the Internet?
1Unplug the power to your
Comwave Internet modem,
home phone adapter and
shut down your computer.
2Wait 30 seconds and then
plug your Comwave Internet
modem’s power cord back
into the power outlet.
3Wait until the LED light
indicators on your Comwave
Internet modem indicate the
modem is operational. This
may take up to 5 minutes.
4Start your computer and
plug in the home phone
adaptor into a power outlet.
5Open your browser and start
surng the Internet. Check
for a dial tone.
Still unable to surf the Internet?
Call us at 1-866-210-9149.
WE’LL GET YOU BACK UP ONLINE!

6.
Wi-Fi Settings
To log into your Wi-Fi, use the default login information found on the back of your modem.
Your modem comes equipped with two types of networks (SSID).
Pick the signal that is strongest on your device and the corresponding passphrase.
To change your default Wi-Fi Username and Password make sure your computer is connected
via the Ethernet Cable to your Comwave Internet Modem and follow the next steps on the
following page.

7.
1
step Open your internet browser and type
http://192.168.0.1 in the address bar.
2
step Enter your Username: “cusadmin”and
Password: “password”. Click LOGIN to
proceed.
3
step Click on the Manage Wireless button
at the bottom right of the screen.
4
step Click Basic Settings in the top menu to
a. Change your SSID network name
b. Change your password
5
step Click Save Changes.
2
step
3
step
For advanced users wishing to change their network name and/
or password, follow the steps below.
a.
b.
4
step
Advanced Wi-Fi Settings

Need more help?
1-866-210-9149
Hitron 3550 Installation Guide