Hitron CDA3-20 User manual

FOR YOUR CABLE MODEM
QUICK
INSTALLATION
GUIDE
INTERNET MODEM
(HITRON CDA3-20)
ENGLISH
STEP BY STEP INSTRUCTIONS
TO CONNECT CABLE INTERNET MODEM (HITRON CDA3-20)
Purchased a Wi-Fi Router from Flash Services?
Follow the Modem & Wi-Fi Router Combo Quick
Installation Guide included with your router.
IMPORTANT!
Wait until your
internet installation/
activation date and
time, then follow the
steps in this guide.
ETHERNET CABLECABLE MODEM
INCLUDED
EQUIPMENT:
MODEM POWER ADAPTER
STEP STEP
Connect your Coaxial Cable to the Modem
• Locate the coaxial cable in your home.
(connected to the cable outlet).
• Connect it to the cable port,
(located on the back of the modem), using
3 clockwise rotations or until securely fastened.
Power on your Modem
• Plug the modem power adapter into the back of the modem.
• Connect the other end into the nearest power outlet.
• The “Power” LED on the front of the modem
should be blue.
Coaxial cable is not
included in the box
Coaxial cable
second end in the modem
Locate Coaxial cable
wall outlet connection
in your home
Power adapter is
included in the box
Cable Port

STEP
Conrm Modem is Online
• Wait until the “Power” LED is solid green.
• This may take up to 10 minutes.
Note:
You must have
a Wi-Fi router if you want
to set up a wireless
network in your home.
STEP
Router Wi-Fi
Back of Router
Coaxial Cable
Ethernet Cable (one end)
Ethernet Cable (second end)
Modem Power Adapter
Ethernet cable is
included in the box
WAN/Internet
Connecting your Wi-Fi Router
• Connect the ethernet cable to the yellow
port of your modem and then to the
“Internet” or “WAN” port on your router.
Your Wi-Fi router should now be connected
to the Internet!
• Reference your router’s manufacturer guide to
complete the setup.
!
OTHER DEVICES
If you purchased Flash Home Phone service, refer to the manual included
with your Phone Adapter to complete the setup.