Hoist Fitness ROC-IT RPL-5301-A User manual

Fax
FaxFax
Fax
[phone]
[phone](858) 578-7676
[phone]
[phone]
[phone](858) 578-9558
[phone]
Customer Service
Customer ServiceCustomer Service
Customer Service
[phone]
[phone](800) 548-5438
[phone]
RECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERERECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERE
MACH NE CODE
MACH NE CODEMACH NE CODE
MACH NE CODE
OWNER'S MANUAL
OWNER'S MANUAL OWNER'S MANUAL
OWNER'S MANUAL
Note: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering PartsNote: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering Parts
A08
A08A08
A08
RPL-5301-A
PLATE-LOADED CHEST PRESS
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.

02
04
24
26
27
28
31
34
35
36
38
39
40
41
42
OWNER'S MANUAL
PAGE 01 RPL-5301-A ASSEMBLY
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
MACHINE ADJUSTMENT......................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
CONTENTS

OWNER' S MANUAL
PAGE 02
RPL-5301-A ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER' S MANUAL
PAGE 03 RPL-5301-A ASSEMBLY

OWNER'S MANUAL
PAGE 04
RPL-5301-A ASSEMBLY
FRAME ASSEMBLY

29
85
67
59
67
93
15
12
22
58
11
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- HAND TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
OWNER' S MANUAL
PAGE 05 RPL-5301-A ASSEMBLY

80
66
57
57
19
80
66
66
92
66
92
113
68
66
115
112
13
115
112
66
68
13
113
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
OWNER'S MANUAL
RPL-5301-A ASSEMBLY PAGE 06

NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 07 RPL-5301-A ASSEMBLY
17
66
77
73
38
66
92
22
19

FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
OWNER'S MANUAL
RPL-5301-A ASSEMBLY PAGE 08
87
67
18
42
67
93
87
67
93
67
22
12
15

67
93
67
67
90
54
86
67
93
NOTE:
PREVIOUS STEPS.
- WRENCH TIGHTEN ALL HARDWARE FROM
FRAME ASSEMBLY
- WRENCH TIGHTEN HARDWARE.
OWNER' S MANUAL
PAGE 09 RPL-5301-A ASSEMBLY

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
OWNER' S MANUAL
RPL-5301-A ASSEMBLY PAGE 10
78
66
23
92
66
78
66
78
66
8
10
66
92
66
92

NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER' S MANUAL
PAGE 11 RPL-5301-A ASSEMBLY
93
67
91
67
23

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
OWNER' S MANUAL
RPL-5301-A ASSEMBLY PAGE 12
14
67
93
14
89
67
23
19
67
93
67
89

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
PAGE 13
OWNER'S MANUAL
RPL-5301-A ASSEMBLY
18
93
46
20
21
27
24
NOTE:
INSTALL LEVELING FOOT AND HARDWARE (24,27)
BEFORE ATTACHING PULL ARMS (20,21)

66
20
82
21
66
41
41
92
1
CABLE PROPER TENSION.
RE-TIGHTEN JAM NUT.
FINE TUNING:
LOOSEN JAM NUT AND THREAD
CABLE BOLT IN/OUT TO GIVE THE
1
NOTE:
BE SURE CABLE RUNS
BETWEEN THE PULLEYS
AND THE GUARD PINS, AS
SHOWN.
1
93 15/16" 2387
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
RPL-5301-A ASSEMBLY
OWNER'S MANUAL
PAGE 14
1
CABLE BOLT
16
JAM NUT
108
PROPERLY INSTALLED VIEW
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
OWNER'S MANUAL
PAGE 15 RPL-5301-A ASSEMBLY
21
47
84
108
67
84
67
108
20

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
OWNER'S MANUAL
RPL-5301-A ASSEMBLY PAGE 16
63
81
68
66
66
68
81
113
68
66
112
111
45
15

NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 17 RPL-5301-A ASSEMBLY
76
2
7
65
109

23
9MAKE SURE THE
ORIENTATION
OF PULL PIN (9)
IS AS SHOWN.
66
7
68
9
81
23
83
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
RPL-5301-A ASSEMBLY
OWNER'S MANUAL
PAGE 18

- WRENCH TIGHTEN HARDWARE.
NOTE:
REMOVED FOR CLARITY.
- SOME PARTS MAY HAVE BEEN
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 19 RPL-5301-A ASSEMBLY
53
5
65
109
4
74