Hoist Fitness MC-7016 User manual

Fax
[phone]
[phone]
Customer Service
[phone]
RECORD SERIAL NUMBER HERE
MACHINE CODE
Note: Both Serial Number and Model Number are Required when Ordering Parts
OWNER'S MANUAL
A00
MC-7016
UPPER CAGE WITH CHIN UP BAR

02
04
08
09
10
11
12
ABBREVIATIONS...................................................................
OWNER'S MANUAL
PAGE 01 MC-7016 ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
CONTENTS

OWNER'S MANUAL
PAGE 02MC-7016 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
Drift Pin
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

OWNER'S MANUAL
PAGE 03 MC-7016 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

OWNER'S MANUAL
PAGE 04
MC-7016 ASSEMBLY
FRAME ASSEMBLY

INSTALLED VIEW
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- YOUR MOTION CAGE CONFIGURATON
MAY DIFFER FROM THE ONE SHOWN.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
PAGE 05 MC-7016 ASSEMBLY
10
7
5
3
1
5
MC-7015

NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
FRAME ASSEMBLY
OWNER'S MANUAL
MC-7016 ASSEMBLY PAGE 06
5
9
6
4
2
6
10
3
8
5
10
1

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
PARTS INCLUDED WITH THE MC-7011.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
PAGE 07 MC-7016 ASSEMBLY
*IMPORTANT*
NOW THAT THE MC-7016 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. IF THE UNIT
IS NOT SQUARE, IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO
RE-ALIGN THE FRAME AND RETIGHTEN BOLTS.
1
*
*
*
*
*
*
*
*
*
*
3
MC-7011

UNLESS OTHERWISE STATED.
REMOVED FOR CLARITY.
- SOME PARTS MAY HAVE BEEN
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
OWNER'S MANUAL
MC-7016 ASSEMBLY PAGE 08
11
12
11

DECAL REFERENCE
PAGE 09
OWNER'S MANUAL
MC-7016 ASSEMBLY
021-0003230
SERIAL # DECAL