HOMCOM A91-054 Installation guide

ASSEMBLY & INSTRUCTION MANUAL
INadf002V02_UK
A91-054
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

P
ART
LIST:
14 Seat 1X
15 Backrest 1X
16 End cap 5X
17 End cap 4X
18 End cap 10X
19 End cap 8X
20 End cap 7X
NO. DESCRIPTION NUMBER
1Upright 2X
2Main beam 1X
3Front upright 1X
4Cross beam 1X
5Front Stabilizer 1X
6Pivot Bar 2X
7Cross bar 1X
8Leg extension bracket 1X
9Fly arm 2X
10Foam tube 2X
11 Foam tube 3X
12 Fix locking 2X
13 Spring locking 3X
35
36
10
24
43
34
20
7
12
42
28
41
38
15
18
41
21
19
41
9
19
18 24
25
41
36
16
37
14
40 27
37
3
6
2
32
36
17
33
36
29
30
11
5
36
16
22
8
18
11
13
28
44
29
39
27
44
26
26

ASSEMBLY
21 Protect cap 2X
22 Protect cap 1X
24 Foam 8X
25 “U” Rear stabilizer 1X
26 Knob 2X
27 Knob 2X
28 Screw 8 x 50 mm
29 Screw 10 x 60 mm
30 Screw 10 x 60 mm
8X
2X
1X
32 Screw 8 x 40 mm 4X
33 Screw 8 x 20 mm 4X
34 Screw 10 x 120 mm 2X
35 Screw 8 x 45 mm 2X
36 Washer 8 x 16 x 1,5 mm 19X
37 Washer 10 x 20 x 2 mm 5X
38 Knob 2X
39 Washer 6 x 16 x 1 mm 2X
40 Nut M10 1X
41 Nut M8 11X
42 Nut M6 2X
43 Protect cap 2X
44 3X
Screw 8 x 55 mm
19
28
25
41
36
28
4
1
12
2
3
36
16
5
41
42
21
39
27 44
26
29
27
26
44
44
STEP 1 Fix the two uprights (1) to the “U” rear stabilizer (25) use 4 sets of screw (28), washer (36)
and nut (41), connect the cross beam (4) to the two uprights (1) use 4 sets of screw (28),
washer (36) and nut (41), attach the main beam (2) to the center of the cross beam (4)
use one set of screw (29),knob (27) and one set of screw (44),knob (26).
Then fix the front upright (3) to the front stabilizer (5) use one set of screw (44) ,washer (36)
and nut (41), and connect the front upright (3) to the main beam (2)
knob (27) and one set of screw (44),knob (26).
use one set of screw (29),

7
15
18
14
6
32
17
33
36
18 24
11
STEP 2 Insert the cross bar (7) to the hole of the two uprights (1),
attach the pivot bar (6) to the main beam (2), fix the backrest (15) on the
pivot bar (6) use 4 sets of screw (32) and washer (36), then fix the seat (14) on the main
beam (2) use 4 sets of screw (33) and washer (36), insert the foam tube (26) to the front
upright (3) and attach the foam (27) to the foam tube (26).
35
36
10
24
43
34
20
37
40
37
22
8
18
11
13
30
19
38
41
9
STEP 3 Attach the foam (24) to the foam tube (10), insert the foam tube to the fly arm (9) use
one set of screw (35), washer (36) and nut (41), then fix the two fly arms to the two
uprights (1) use 2 sets of screw (34), washer (37), and knob (38), and attach the protect
cap (43) on the screw (30).
Fix the leg extension bracket (8) to the front upright (3) use one set of Screw (30), washer
(37) and nut (40), insert the two foam tubes (11) to the leg extension bracket (8), then
attach the foam (24) to the foam tube (11).