HOMCOM AA1-089V70 User manual

ASSEMBLY & INSTRUCTION MANUAL
INaq002_UK
AA1-089V70
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
When you get the electric assist scooter for the first time, please fully charge the battery before first use.
Please charge immediately if the scooter emits a low battery warning tone to avoid damage to the battery.
Ensure battery is never stored completely flat. lf scooter is stored for long periods of time, please charge at least
once per month.
Gently push yourself to start moving and gradually push the accelerator.( Motor will only activate when the
scooter is travelling beyond 3km/h) with the first ride you should carefully operate throttle. When on the move put
your second leg on the deck and enjoy the ride.
To stop riding,release the throttle and use the foot-brake in order to slow down towards a complete stop.Then
step off the scooter.

-1-
Contents

-2-
1.Your Scooter & Accessories
Accessories
Allen Key x1 Adaptateur de charge x1

-3-
2.Functions
Model Specification
Battery Capacity
Charger Time
Motor Power
Range after full charge
Charger Details
Wheel size
Max load capacity
Product weight
Product size
Max speed
Age
Suit for
21.6V/2.0AH Lithium
2-3hours
120W
5-6KM
Input :AC 100-240V50/60Hz 0.5A.
Output:DC 24V/2A
5" PU wheel
50KGS
5.2KGS
77*44*83/87CM
8KM/H
6+
120cm-170cm

-4-
3.Assembling your scooter
4.Charging the scooter
1.A. Use the allen key to lock the handlebar
to the stem. B.And then lock the clamp.
3.Ensure wheel nuts are tight.
2.Ensure headset clamp is positioned at the
very bottom of stem and tighten.
ALL FIXTURES SHOULD BE CHECKED ON A
REGULAR BASIS TO ENSURE THEY ARE
SUFFICIENTLY TIGHTENED.
1.Only use the supplied and dedicated charger.
2.Open the charging port rubber cover on the footplate and insert the
charger output connector into the charging hole.
3.Plug the charger into the power socket supply.
4.The charger indicator is red, indicating that it is charging. When the
charger indicator shows green, the battery isfully charged.
5. When the battery is fully charged unplug the charger from the mains
power supply and from the scooter, then close the charging port
rubber cover. Do not charge overnight
6.The electric kids scooter is ready to use.

-5-
5.How to use
Warning: protective equipment should be
worn.Mv recommend the use of protective pad
and helmets when using this product
l. Press the POWER key to turn on the scooter
and check the battery power (LED's will illumi-
nate)
2.Gently push yourself to start moving and
gradually push the accelerator. ( Motor will only
activate when the scooter is travelling beyond
3km/h) with the first ride you should carefully
operate throttle. When on the move put your
second leg on the deck and enjoy the ride.
Using the thumb throttle, gently moderate speed
up to maximum 8km/h.
3.To stop riding, release the throttle and use the
foot-brake in order to slow down towards a
complete stop.Then step off the scooter
4.Turn off the scooter when finished using the
product.

-6-
6. Safety Instructions
Maintenance of Your Scooter

-7-
7. Care & Storage
Clean and store Scooter
Maintenance of Your Scooter`s Battery

-8-