Honeywell S283w703-6 Setup guide

Honeywell International Inc.

550 State Route 55

Urbana, Ohio 43078-1948

U.S.A.

CAGE: 72914

Telephone: 800-601-3099 (Toll Free U.S.A./Canada)

Telephone: 602-365-3099 (International Direct)

Website: www.myaerospace.com

Component Maintenance Manual

with Illustrated Parts List

Door Mounted Cargo Loading Light

Part Number CAGE

15-0705-5 72914

S283W703-6 81205

15-0705-7 72914

S283W703-17 81205

Legal Notice

Export Control

This document contains technical data and is subject to U.S. export regulations. These commodities, technology, or

software were exported from the United States in accordance with the export administration regulations. Diversion contrary

to U.S. law is prohibited.

ECCN: 9E991.

33-30-15

Page T-1

Publication Number D199602000093, Revision 9 Initial 26 Feb 1996

Revised 30 Mar 2017

©Honeywell International Inc. Do not copy without express permission of Honeywell.

COMPONENT MAINTENANCE MANUAL

15-0705

Proprietary Information Honeywell - Confidential

THIS DOCUMENT AND ALL INFORMATION CONTAINED HEREIN ARE THE CONFIDENTIAL AND

PROPRIETARY INFORMATION OF HONEYWELL AND CONTAIN HONEYWELL TRADE SECRETS.

NEITHER THIS DOCUMENT NOR THE INFORMATION CONTAINED HEREIN MAY, IN WHOLE OR IN

PART, BE USED, DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT PRIOR WRITTEN

PERMISSION OF HONEYWELL.

PLEASE REVIEW THE TERMS OF THIS AGREEMENT CAREFULLY BEFORE USING THIS

DOCUMENT, AS BY USING IT, YOU ACKNOWLEDGE THAT YOU HAVE REVIEWED THIS AGREEMENT

AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS.

Honeywell Materials License Agreement

This document and the information contained herein (“the Materials”) are the proprietary data of

Honeywell. These Materials are provided for the exclusive use of Honeywell-authorized Service Centers;

Honeywell-authorized repair facilities; owners of a Honeywell aerospace product that is the subject of these

Materials (“Honeywell Product”) that have entered into a written agreement with Honeywell relating to

the repair or maintenance of Honeywell Product; and direct recipients of Materials from Honeywell via

https://myaerospace.honeywell.com/wps/portal/ that own a Honeywell Product. The terms and conditions

of this Honeywell Materials License Agreement (“License Agreement”) govern your use of these Materials,

except to the extent that any terms and conditions of another applicable agreement with Honeywell

regarding the maintenance or repair of a Honeywell Product and that is the subject of the Materials conflict

with the terms and conditions of this License Agreement, in which case the terms and conditions of the

other agreement will govern. However, this License Agreement will govern in the event of a conflict

between these terms and conditions and those of a purchase order or acknowledgement. Your access or

use of the Materials represents your acceptance of the terms of this License Agreement.

1. License Grant - If you are a party to an applicable written agreement with Honeywell relating to the

repair or maintenance of the subject Honeywell Product, subject to your compliance with the terms and

conditions of this License Agreement, Honeywell hereby grants you, and you accept, a limited, personal,

non-transferrable, non-exclusive license to use these Materials only in accordance with that agreement.

If you are a direct recipient of these Materials from Honeywell’s MyAerospace Technical Publication

website and are not a party to an agreement related to the maintenance or repair of the subject Honeywell

Product, subject to your compliance with the terms and conditions of this License Agreement, Honeywell

hereby grants you, and you accept, a limited, personal, non-transferrable, non-exclusive license to use a

single copy of these Materials to maintain or repair only the subject Honeywell Product installed or intended

to be installed on the aircraft you own and/or operate and only at the facility to which these Materials

have been shipped (“the Licensed Facility”). Transfer of the Materials to another facility owned by you is

permitted only if the original Licensed Facility retains no copies of the Materials, the transferee accepts

all of your obligations and liabilities under this License Agreement, and you provide prior written notice

to Honeywell with the name and address of the transferee. You agree not to use these Materials for

commercial purposes.

2. Restrictions on Use - You may not sell, rent, lease or lend the Materials, except for lending your Materials

for the maintenance or repair of the subject Honeywell Product you own to someone solely acting on your

behalf You may not use the Materials to reverse engineer any Honeywell product, hardware or software,

and may not decompile or disassemble software provided under this License Agreement, except and only

to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. You

may not create derivative works or modify the Materials in any way. You agree that Materials shall only be

used for the purpose of the rights granted herein. The Material furnished hereunder may be subject to U.S.

33-30-15 Page T-2

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

export regulations. You will adhere to all U.S. export regulations as published and released from time to

time by the U.S. Government. You may not design or manufacture a Honeywell part or detail of a Honeywell

part, to create a repair for a Honeywell part, design or manufacture any part that is similar or identical to a

Honeywell part, compare a Honeywell part or design of a Honeywell part to another part design, or apply for

FAA PMA or other domestic or foreign governmental approval to manufacture or repair a Honeywell part.

3. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are

not expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets.

The Materials are licensed and not sold under this License Agreement. No license to use any Honeywell

trademarks or patents is granted under this License Agreement.

4. Changes - Honeywell reserves the right to change the terms and conditions of this License Agreement

at any time, including the right to change or impose charges for continued use of the Materials. Honeywell

may add, delete or otherwise modify any portion of the Materials (“Updated Materials”) at any time. You

agree to stop using outdated Materials upon issuance of any Updated Materials.

5. Confidentiality - You acknowledge that these Materials contain information that is confidential and

proprietary to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of these

Materials.

6. Assignment And Transfer - This License Agreement may be assigned to a service center approved

and formally designated as a service center by Honeywell, provided, however, that you retain no copies

of the Materials in whole or in part. However, the recipient of any such assignment or transfer must

assume all of your obligations and liabilities under this License Agreement. No assignment or transfer shall

relieve any party of any obligation that such party then has hereunder. Otherwise, neither this License

Agreement nor any rights, licenses or privileges granted under this License Agreement, nor any of its

duties or obligations hereunder, nor any interest or proceeds in and to the Materials shall be assignable or

transferable (in insolvency proceedings, by merger, by operation of law, by purchase, by change of control

or otherwise) by you without Honeywell’s written consent.

7. Copies of Materials - Unless you have the express written permission of Honeywell, you may not make

or permit making of copies, digital or printed, of the Materials. You agree to return the Materials and any

such copies thereof to Honeywell upon the request of Honeywell.

8. Term - This License Agreement is effective until terminated as set forth herein. This License Agreement

will terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this

License Agreement or will terminate simultaneously with the termination or expiration of your applicable

agreement with Honeywell relating to the repair or maintenance of the subject Honeywell Product. Upon

termination of this License Agreement, you will return these Materials to Honeywell without retaining any

copies, in whole or in part, and will have one of your authorized officers certify that all Materials have

been returned with no copies retained.

9. Audit Rights - Honeywell, through its authorized representatives, with no less than thirty (30) calendar

days notice from Honeywell, has the right during normal business hours during the term of this License

Agreement and for three (3) years thereafter to visit you and have access to the inside and outside of

your facility for the purpose of inspecting, observing and evaluating your compliance under this License

Agreement.

10. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from

a breach of this License Agreement.

11. Limitation of Liability - Honeywell makes no representations or warranties regarding the use or

sufficiency of the Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR

ORAL, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO (i) WARRANTIES

ARISING FROM COURSE OF PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY

EXPRESSLY DISCLAIMED, OR (ii) WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL

33-30-15 Page T-3

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

PROPERTY RIGHTS OF THIRD PARTIES, EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH

INFRINGEMENT. IN NO EVENT WILL HONEYWELL BE LIABLE FOR ANY INCIDENTAL DAMAGES,

CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS

OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND EXCLUSIONS

WILL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF CONTRACT,

WARRANTY, INDEMNITY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION

OF LAW, OR OTHERWISE.

12. Controlling Law - This License Agreement shall be governed and construed in accordance with the

laws of the State of New York without regard to the conflict of laws provisions thereof.

13. Severability - In the event any provision of this License Agreement is determined to be illegal, invalid,

or unenforceable, the validity and enforceability of the remaining provisions of this License Agreement

will not be affected and, in lieu of such illegal, invalid, or unenforceable provision, there will be added

as part of this License Agreement one or more provisions as similar in terms as may be legal, valid

and enforceable under controlling law.

14. Integration and Modification - This License Agreement and all attachments set forth the entire

agreement and understanding between the parties on the subject matter of the License Agreement and

merges all prior discussions and negotiations among them. This License Agreement may be modified only

by a duly-authorized representative of Honeywell.

Safety Advisory

WARNING: BEFORE THE MATERIALS CALLED OUT IN THIS PUBLICATION ARE USED, KNOW THE

HANDLING, STORAGE AND DISPOSAL PRECAUTIONS RECOMMENDED BY THE MANUFACTURER

OR SUPPLIER. FAILURE TO OBEY THE MANUFACTURERS’ OR SUPPLIERS’ RECOMMENDATIONS

CAN RESULT IN PERSONAL INJURY OR DISEASE.

This publication describes physical and chemical processes which can make it necessary to use chemicals,

solvents, paints, and other commercially available materials. The user of this publication must get the

Material Safety Data Sheets (OSHA Form 174 or equivalent) from the manufacturers or suppliers of the

materials to be used. The user must know the manufacturer/ supplier data and obey the procedures,

recommendations, warnings and cautions set forth for the safe use, handling, storage, and disposal

of the materials.

Warranty/Liability Advisory

WARNING: HONEYWELL ASSUMES NO RESPONSIBILITY FOR ANY HONEYWELL EQUIPMENT

WHICH IS NOT MAINTAINED AND/OR REPAIRED IN ACCORDANCE WITH HONEYWELL’S

PUBLISHED INSTRUCTIONS AND/OR HONEYWELL’S FAA/SFAR 36 REPAIR AUTHORIZATION.

NEITHER DOES HONEYWELL ASSUME RESPONSIBILITY FOR SPECIAL TOOLS AND TEST

EQUIPMENT FABRICATED BY COMPANIES OTHER THAN HONEYWELL.

WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR

DECREASE THE LIFE OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING

OR TEST EQUIPMENT CAN RESULT IN DAMAGE TO THE PRODUCT COMPONENTS OR GIVE

UNSATISFACTORY RESULTS.

33-30-15 Page T-4

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

Honeywell is a registered trademark of Honeywell International Inc.

All other marks are owned by their respective companies.

THIS IS THE CMM FOSI - DATE: 20101217

33-30-15 Page T-5

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

Blank Page

33-30-15 Page T-6

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

TRANSMITTAL INFORMATION

REVISION NUMBER 9 DATED 30 MAR 2017

TO HOLDERS OF DOOR MOUNTED CARGO LOADING LIGHT CMM ATA NO. 33-30-15 ISSUED FOR USE

IN SUPPORT OF THE FOLLOWING:

Table TI-1 shows the applicable components.

Table TI-1. Applicable Components

Component PN Boeing PN Nomenclature

15-0705-5, -7 S283W703-6, -17 Door mounted cargo loading light

Revision History

Table TI-2 shows the revision history of this CMM.

Table TI-2. Revision History

Revision Number Revision Date

026 Feb 1996

115 Sep 1996

215 Dec 2006

325 Aug 2011

424 Oct 2012

526 Feb 2013

66 Dec 2013

717 Apr 2015

823 Jun 2016

930 Mar 2017

This revision is a full replacement. All pages have a new date, as identified in the List of Effective Pages.

Revision bars identify the changed data. A revision bar adjacent to the Fig./Item column identifies changes in

the Detailed Parts List. See Transmittal information for history of revisions to this CMM.

Remove and discard all pages of the manual and replace them with the attached pages. Write the revision

number, revision date, and replacement date on the Record of Revisions page.

Remove and discard all Temporary Revision pages in this manual. Write the date you remove the Temporary

Revision from the manual on the Record of Temporary Revisions page.

The table of highlights tells users what has changed as a result of the revision. The table consists of three

columns.

The Task/Page column identifies the blocks of changed information, such as a task, subtask, graphic, or parts

list, and the page on which that block starts. The block of information often includes the MTOSS code. Revision

marks, when provided, identify the location of the change within the block.

EFFECTIVITY

ALL 33-30-15 Page TI-1

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

The Description of Change column tells about the change or changes within each block. The description of

change is often preceded by a paragraph or figure reference that applies to the block of information.

The Effectivity column tells the user the part number(s) to which the block of information applies. The default

value for this column is "All." "All" means that the block applies to all parts.

Table of Highlights

Task/Page Description of Change Effectivity

TRANSMITTAL

INFORMATION Global Change: Revised boiler plate data to update url

for H4/H8 CAGE code website and are not identified

with revision bars.

All

TRANSMITTAL

INFORMATIONAdded TR 33-2 to the Record of Temporary Revisions List. All

GRAPHIC

33-30-15-99B-805-A01

(Page 2002)

Figure 2001. Updated to show the latest engineering

information. All

Subtask

33-30-15-99C-013-A01

(Page 6001)

Paragraph 1.B. Table 6002. Updated to show PN

T08C01G018009 and PN T08C01G018005. All

TASK

33-30-15-300-801-A01

(Page 6003)

Paragraph 2. Table 6003. Updated to show PN

T08C01G018009 and PN T08C01G018005. All

Subtask

33-30-15-940-001-A01

(Page 9001)

Paragraph 1.B. Table 9002. Updated to show PN

T08C01G018009 and PN T08C01G018005. All

ILLUSTRATED PARTS LIST Changed content and format to agree with Honeywell

processes in effect at the time of the release of this

revision.

All

ILLUSTRATED PARTS LIST IPL Figure 1. Updated graphic to show latest drawing data. All

ILLUSTRATED PARTS LIST IPL Figure 1. Updated Item 105C to show latest parts

list data. All

EFFECTIVITY

ALL 33-30-15 Page TI-2

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

RECORD OF REVISIONS

For each revision, write the revision number, revision date, date put in the manual, and your initials in the

applicable column.

NOTE: Refer to the Revision History in the TRANSMITTAL INFORMATION section for revision data.

EFFECTIVITY

ALL 33-30-15 Page RR-1

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

Blank Page

EFFECTIVITY

ALL 33-30-15 Page RR-2

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

RECORD OF TEMPORARY REVISIONS

Instructions on each page of a temporary revision tell you where to put the pages in your manual. Remove

the temporary revision pages only when discard instructions are given. For each temporary revision, put the

applicable data in the record columns on this page.

Definition of Status column: A TR may be active, incorporated, or deleted. “Active” is entered by the holder

of the manual. “Incorporated” means a TR has been incorporated into the manual and includes the revision

number of the manual when the TR was incorporated. “Deleted” means a TR has been replaced by another

TR, a TR number will not be issued, or a TR has been deleted.

Date Date

Temporary Put Removed

Revision Page Issue in from

Number Status Number Date Manual By Manual By

33-1 Incorporated

Revision 8

33-2 Incorporated

Revision 9

EFFECTIVITY

ALL 33-30-15 Page RTR-1

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

Blank Page

EFFECTIVITY

ALL 33-30-15 Page RTR-2

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

SERVICE BULLETIN LIST

Service Bulletin / Date Put in

Revision Number Title Modification Manual

SB 15-0705-33-1 Modification (MOD) 1 to Cargo Light, PN

15-0705-5 (Boeing PN S283W703-6); Reduce

Possible Damage to Lamp Contacts

1 25 Aug 2011

Revisions 1, 2, and 3 Added Cargo Light PN 15-0705-7 1 26 Feb 2013

Revision 4 Added Acronyms and Abbreviations Table and

Serial Numbers Below 8096 1 23 Jun 2016

EFFECTIVITY

ALL 33-30-15 Page SBL-1

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

Blank Page

EFFECTIVITY

ALL 33-30-15 Page SBL-2

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

LIST OF EFFECTIVE PAGES

Subheading and Page Date Subheading and Page Date

Title

T-1 30 Mar 2017

T-2 30 Mar 2017

T-3 30 Mar 2017

T-4 30 Mar 2017

T-5 30 Mar 2017

T-6 30 Mar 2017

Transmittal Information

TI-1 30 Mar 2017

TI-2 30 Mar 2017

Record of Revisions

RR-1 30 Mar 2017

RR-2 30 Mar 2017

Record of Temporary Revisions

RTR-1 * 30 Mar 2017

RTR-2 30 Mar 2017

Service Bulletin List

SBL-1 30 Mar 2017

SBL-2 30 Mar 2017

List of Effective Pages

LEP-1 30 Mar 2017

LEP-2 30 Mar 2017

Table of Contents

TC-1 30 Mar 2017

TC-2 30 Mar 2017

TC-3 30 Mar 2017

TC-4 30 Mar 2017

TC-5 30 Mar 2017

TC-6 30 Mar 2017

TC-7 30 Mar 2017

TC-8 30 Mar 2017

Introduction

INTRO-1 30 Mar 2017

INTRO-2 30 Mar 2017

INTRO-3 30 Mar 2017

INTRO-4 30 Mar 2017

INTRO-5 30 Mar 2017

INTRO-6 30 Mar 2017

INTRO-7 30 Mar 2017

INTRO-8 30 Mar 2017

INTRO-9 30 Mar 2017

INTRO-10 30 Mar 2017

INTRO-11 30 Mar 2017

INTRO-12 30 Mar 2017

INTRO-13 30 Mar 2017

INTRO-14 30 Mar 2017

INTRO-15 30 Mar 2017

INTRO-16 30 Mar 2017

INTRO-17 30 Mar 2017

INTRO-18 30 Mar 2017

INTRO-19 30 Mar 2017

INTRO-20 30 Mar 2017

Description and Operation

1 30 Mar 2017

2 30 Mar 2017

Testing and Fault Isolation

1001 30 Mar 2017

1002 30 Mar 2017

1003 30 Mar 2017

1004 30 Mar 2017

Schematic and Wiring Diagrams

2001 30 Mar 2017

2002 * 30 Mar 2017

Disassembly

3001 30 Mar 2017

3002 30 Mar 2017

3003 30 Mar 2017

3004 30 Mar 2017

Cleaning

4001 30 Mar 2017

4002 30 Mar 2017

4003 30 Mar 2017

* indicates pages changed or added data

F indicates a right foldout

LF indicates a left foldout

EFFECTIVITY

ALL 33-30-15 Page LEP-1

30 Mar 2017

COMPONENT MAINTENANCE MANUAL

15-0705

LIST OF EFFECTIVE PAGES (Cont)

Subheading and Page Date Subheading and Page Date

4004 30 Mar 2017

Inspection/Check

5001 30 Mar 2017

5002 30 Mar 2017

Repair

6001 30 Mar 2017

6002 * 30 Mar 2017

6003 * 30 Mar 2017

6004 30 Mar 2017

6005 30 Mar 2017

6006 30 Mar 2017

6007 30 Mar 2017

6008 30 Mar 2017

6009 30 Mar 2017

6010 30 Mar 2017

Assembly

7001 30 Mar 2017

7002 30 Mar 2017

7003 30 Mar 2017

7004 30 Mar 2017

Fits and Clearances

8001 30 Mar 2017

8002 30 Mar 2017

Special Tools, Fixtures, Equipment, and

Consumables

9001 30 Mar 2017

9002 * 30 Mar 2017

9003 30 Mar 2017

9004 30 Mar 2017

Special Procedures

11001 30 Mar 2017

11002 30 Mar 2017

Removal

12001 30 Mar 2017

12002 30 Mar 2017

Installation

13001 30 Mar 2017

13002 30 Mar 2017

Servicing

14001 30 Mar 2017

14002 30 Mar 2017

Storage (Including Transportation)

15001 30 Mar 2017

15002 30 Mar 2017

Rework (Service Bulletin Accomplishment

Procedures)

16001 30 Mar 2017

16002 30 Mar 2017

Illustrated Parts List

10001 30 Mar 2017

10002 30 Mar 2017

10003 30 Mar 2017

10004 30 Mar 2017

10005 30 Mar 2017

10006 30 Mar 2017

10007 30 Mar 2017

10008 30 Mar 2017

10009 30 Mar 2017

10010 30 Mar 2017

10011 30 Mar 2017

10012 30 Mar 2017

10013 * 30 Mar 2017

10014 * 30 Mar 2017

LF 10015/10016 * 30 Mar 2017

10017 30 Mar 2017

10018 30 Mar 2017

10019 * 30 Mar 2017

10020 30 Mar 2017

* indicates pages changed or added data

F indicates a right foldout

LF indicates a left foldout

EFFECTIVITY

ALL 33-30-15 Page LEP-2

30 Mar 2017

COMPONENT MAINTENANCE MANUAL
15-0705
TABLE OF CONTENTS
LIST OF SECTIONS
Title Page
INTRODUCTION
1. HowtoUseThisManual (TASK33-30-15-99F-801-A01)................................ INTRO-1
A. General (Subtask33-30-15-99F-001-A01).......................................... INTRO-1
B. ObservanceofManualInstructions (Subtask33-30-15-99F-002-A01) .......... INTRO-1
C. Symbols(Subtask33-30-15-99F-003-A01) ......................................... INTRO-1
D. UnitsofMeasure (Subtask33-30-15-99F-004-A01) ............................... INTRO-4
E. PageNumberBlockExplanation (Subtask33-30-15-99F-005-A01) ............. INTRO-4
F. Illustration(Subtask33-30-15-99F-006-A01) ....................................... INTRO-5
G. Application of Maintenance Task Oriented Support System
(MTOSS) (Subtask33-30-15-99F-007-A01) ........................................ INTRO-5
H. StandardPracticesManual (Subtask33-30-15-99F-008-A01) ................... INTRO-14
I. ElectrostaticDischarge(Subtask33-30-15-99F-009-A01) ........................ INTRO-15
2. CustomerSupport (TASK33-30-15-99F-802-A01) ....................................... INTRO-15
A. Honeywell Aerospace Online Technical Publications Website (Subtask 33-30-
15-99F-010-A01)....................................................................... INTRO-15
B. HoneywellAerospaceContactTeam(Subtask33-30-15-99F-011-A01)......... INTRO-15
3. References (TASK33-30-15-99F-803-A01) ............................................... INTRO-15
A. Honeywell/VendorPublications (Subtask33-30-15-99F-012-A01) ............... INTRO-15
B. OtherPublications(Subtask33-30-15-99F-013-A01).............................. INTRO-15
4. ComponentMaintenanceLevels(TASK33-30-15-99F-804-A01) ...................... INTRO-16
A. General (Subtask33-30-15-99F-014-A01).......................................... INTRO-16
5. AcronymsandAbbreviations (TASK33-30-15-99F-805-A01)........................... INTRO-16
A. General (Subtask33-30-15-99F-015-A01).......................................... INTRO-16
6. ProcessVerification (TASK33-30-15-99F-806-A01) ..................................... INTRO-18
A. VerificationData (Subtask33-30-15-99F-016-A01) ................................ INTRO-18
7. SoftwareHistory (TASK33-30-15-99F-807-A01) ......................................... INTRO-18
A. SoftwareData(Subtask33-30-15-99F-017-A01) .................................. INTRO-18
8. HistoryofChanges (TASK33-30-15-99F-808-A01) ...................................... INTRO-18
A. Modification/ConfigurationHistory(Subtask33-30-15-99F-018-A01)............ INTRO-18
B. ChangeHistoryforPartsList (Subtask33-30-15-99F-019-A01)................. INTRO-18
9. ServiceInformationDocuments (TASK33-30-15-99F-809-A01) ....................... INTRO-18
A. Applicable Service Information Documents (Subtask 33-30-15-99F-020-A01) . INTRO-18
EFFECTIVITY
ALL 33-30-15 Page TC-1
30 Mar 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.

COMPONENT MAINTENANCE MANUAL
15-0705
TABLE OF CONTENTS (Cont)
LIST OF SECTIONS (Cont)
Title Page
DESCRIPTION AND OPERATION
1. Description (TASK33-30-15-870-801-A01) ............................................... 1
A. General (Subtask33-30-15-870-001-A01) .......................................... 1
B. JobSetupData(Subtask33-30-15-99C-001-A01)................................. 1
C. DoorMountedCargoLoadingLight (Subtask33-30-15-870-002-A01) .......... 2
2. Operation(TASK33-30-15-870-802-A01) ................................................. 2
A. DoorMountedCargoLoadingLight (Subtask33-30-15-870-003-A01) .......... 2
TESTING AND FAULT ISOLATION
1. PlanningData(TASK33-30-15-99C-801-A01) ........................................... 1001
A. ReasonfortheJob (Subtask33-30-15-99C-002-A01)............................. 1001
B. JobSetupData(Subtask33-30-15-99C-003-A01)................................. 1001
2. Procedure (TASK33-30-15-810-801-A01) ................................................ 1002
A. JobSetup(Subtask33-30-15-810-001-A01) ....................................... 1002
B. PretestProcedures(Subtask33-30-15-810-002-A01)............................. 1002
C. Testing of Door Mounted Cargo Loading Light (Subtask 33-30-15-810-003-
A01) ..................................................................................... 1002
D. PosttestProcedures(Subtask33-30-15-810-004-A01) ........................... 1002
E. FaultIsolation (Subtask 33-30-15-810-005-A01) ................................... 1002
F. JobClose-up (Subtask33-30-15-810-006-A01).................................... 1003
SCHEMATIC AND WIRING DIAGRAMS
1. PlanningData(TASK33-30-15-99C-802-A01) ........................................... 2001
A. ReasonfortheJob (Subtask33-30-15-99C-004-A01)............................. 2001
B. JobSetupData(Subtask33-30-15-99C-005-A01)................................. 2001
2. SchematicandWiringDiagrams(TASK33-30-15-878-801-A01)....................... 2001
A. SchematicDiagrams (Subtask33-30-15-878-001-A01) ........................... 2001
DISASSEMBLY
1. PlanningData(TASK33-30-15-99C-803-A01) ........................................... 3001
A. ReasonfortheJob (Subtask33-30-15-99C-006-A01)............................. 3001
B. JobSetupData(Subtask33-30-15-99C-007-A01)................................. 3001
2. Procedure (TASK33-30-15-000-801-A01) ................................................ 3002
A. JobSetup(Subtask33-30-15-000-001-A01) ....................................... 3002
EFFECTIVITY
ALL 33-30-15 Page TC-2
30 Mar 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.

COMPONENT MAINTENANCE MANUAL
15-0705
TABLE OF CONTENTS (Cont)
LIST OF SECTIONS (Cont)
Title Page
B. Disassembly of Door Mounted Cargo Loading Light (Subtask 33-30-15-000-
002-A01) ................................................................................ 3002
C. JobClose-up (Subtask33-30-15-000-003-A01).................................... 3003
CLEANING
1. PlanningData(TASK33-30-15-99C-804-A01) ........................................... 4001
A. ReasonfortheJob (Subtask33-30-15-99C-008-A01)............................. 4001
B. JobSetupData(Subtask33-30-15-99C-009-A01)................................. 4001
2. Procedure (TASK33-30-15-100-801-A01) ................................................ 4002
A. JobSetup(Subtask33-30-15-100-001-A01) ....................................... 4002
B. ExternalParts (Subtask33-30-15-100-002-A01)................................... 4002
C. ElectricalParts(Subtask33-30-15-100-003-A01).................................. 4002
D. Metal MechanicalParts (Subtask33-30-15-100-004-A01) ........................ 4003
E. JobClose-up (Subtask33-30-15-100-005-A01).................................... 4003
INSPECTION/CHECK
1. PlanningData(TASK33-30-15-99C-805-A01) ........................................... 5001
A. ReasonfortheJob (Subtask33-30-15-99C-010-A01)............................. 5001
B. JobSetupData(Subtask33-30-15-99C-011-A01)................................. 5001
2. Procedure (TASK33-30-15-210-801-A01) ................................................ 5001
A. JobSetup(Subtask33-30-15-210-001-A01) ....................................... 5001
B. StandardChecks (Subtask33-30-15-210-002-A01) ............................... 5002
C. JobClose-up (Subtask33-30-15-210-003-A01).................................... 5002
REPAIR
1. PlanningData(TASK33-30-15-99C-806-A01) ........................................... 6001
A. ReasonfortheJob (Subtask33-30-15-99C-012-A01)............................. 6001
B. JobSetupData(Subtask33-30-15-99C-013-A01)................................. 6001
2. Procedure (TASK33-30-15-300-801-A01) ................................................ 6003
A. JobSetup(Subtask33-30-15-300-001-A01) ....................................... 6003
B. ReferencesforRepair(Subtask33-30-15-300-002-A01) ......................... 6003
C. StandardRepairProcedures(Subtask33-30-15-300-003-A01) .................. 6004
D. SurfaceFinishProcedure (Subtask33-30-15-210-004-A01) ..................... 6004
E. RepairofConnectorandRelatedParts (Subtask33-30-15-300-004-A01)...... 6005
F. RepairofLensAssembly (Subtask33-30-15-300-005-A01) ...................... 6007
EFFECTIVITY
ALL 33-30-15 Page TC-3
30 Mar 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.

COMPONENT MAINTENANCE MANUAL
15-0705
TABLE OF CONTENTS (Cont)
LIST OF SECTIONS (Cont)
Title Page
G. PostrepairProcedures(Subtask33-30-15-300-006-A01) ......................... 6009
H. JobClose-up (Subtask33-30-15-300-007-A01).................................... 6009
ASSEMBLY
1. PlanningData(TASK33-30-15-99C-807-A01) ........................................... 7001
A. ReasonfortheJob (Subtask33-30-15-99C-014-A01)............................. 7001
B. JobSetupData(Subtask33-30-15-99C-015-A01)................................. 7001
2. Procedure (TASK33-30-15-400-801-A01) ................................................ 7002
A. JobSetup(Subtask33-30-15-400-001-A01) ....................................... 7002
B. Assembly of Door Mounted Cargo Loading Light (Subtask 33-30-15-400-002-
A01) ..................................................................................... 7002
C. JobClose-up (Subtask33-30-15-400-003-A01).................................... 7003
FITS AND CLEARANCES
1. PlanningData(TASK33-30-15-99C-808-A01) ........................................... 8001
A. ReasonfortheJob (Subtask33-30-15-99C-016-A01)............................. 8001
B. JobSetupData(Subtask33-30-15-99C-017-A01)................................. 8001
2. FitsandClearances (TASK33-30-15-220-801-A01) ..................................... 8001
A. Fits and Clearances of the Door Mounted Cargo Loading
Light(Subtask33-30-15-220-001-A01).............................................. 8001
B. TorqueValues (Subtask33-30-15-220-002-A01)................................... 8001
SPECIAL TOOLS, FIXTURES, EQUIPMENT, AND CONSUMABLES
1. PlanningData(TASK33-30-15-99C-809-A01) ........................................... 9001
A. ReasonfortheJob (Subtask33-30-15-99C-018-A01)............................. 9001
B. JobSetupData (Subtask33-30-15-940-001-A01) ................................. 9001
SPECIAL PROCEDURES
1. NotApplicable ................................................................................ 11001
REMOVAL
1. NotApplicable ................................................................................ 12001
INSTALLATION
1. NotApplicable ................................................................................ 13001
SERVICING
1. NotApplicable ................................................................................ 14001
EFFECTIVITY
ALL 33-30-15 Page TC-4
30 Mar 2017
© Honeywell International Inc. Do not copy without express permission of Honeywell.