Honeywell W10I0198 / AL93 User manual

Read and save these instruction before use
User Manual
Kaleidoscope Projector Light
W10I0198 / AL93

EN 2
IMPORTANT SAFETY INSTRUCTIONS
THANK YOU
Thank you for purchasing Kaleidoscope Projector Light. There are 8 different
light effects, easily switch between colors and lighting, over 120 effects. For
your convenience, APP to connect and control all your lights, utilize timer to
save energy.
outdoor use. When products are used in outdoor applications, connect the product
to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
similar sources of heat.
or nails.
unattended.
the wire insulation.
in use.
electric shock it should not be played with or placed where small children can reach it.
Do not use seasonal products outdoors unless marked suitable for indoor and
This seasonal use product is not intended for permanent installation or use.
Do not mount or place near gas or electric heaters,fireplaces, candles or other
Do not secure the wiring of the product with staples or nails, or place on sharp hooks
Do not let lamps rest on the supply cord or on any wire.
Unplug the product when leaving the house, or when retiring for the night, or if left
This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and
Do not use this product for other than its intended use.
Do not hang ornaments or other objects from cord, wire, or light string.
Do not close doors or windows on the product or extension cords as this may damage
Do not cover the product with cloth, paper or any material not part of the product when
When using electrical products, basic precautions should always be followed
including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not use with an extension cord unless plug can be fully
inserted. Do not alter or replace the plug.
or short-circuit situation. If the fuse blows, unplug the product from the outlet.
Also unplug any additional strings or products that may be attached to the product.
Replace the fuse as per the user servicing instructions (follow product marking for
proper fuse rating) and check the product. If the replacement fuse blows, a short-circ-
uit may be present and the product should be discarded.
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
This product employs overload protection (fuse). A blown fuse indicates an overload
Read and follow all instructions that are on the product or provided with the product.
This product has a polarized plug (one blade is wider than the other) as a feature to
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
EN 3
SAVE THIS INSTRUCTIONS.

PACKAGE CONTENT
PRODUCT SPECIFICATION
EN 4
A B
C D
Installation kit:
A. Projector (1 set)
(1 set)
(1 set)
(1 set)
B. Adapter
C. Stake Set
D. Base
Specification
Input 120V~ 60Hz, 0.5A
Output 9V, 1A
Color Red/Green/Blue/White
Mode Steady/Sparkle/Glimmer/Fade/Candle/Fireworks/Surge/Show
Timer 2/4/6/8 hr
Led Operation 12V, 1.5A
Operating Temperature -15°F~90°F
Dimension
Projection Coverage 60Ft * 60Ft
Warranty One Year Limited
4.19 * 8.11 * 14.87 in
Parameter

INSTALLATION
EN 5
1. Screw to connect the assembled stake with the projector securely.
Or screw to connect the base with the projector securely.
Or
2. Connect the adapter as figure shows.

EN 6
1. Presetting timer: 6 hours ON / 18 hours OFF.
USE AND OPERATION
Preparation
2. Press the mode button to switch light modes.
BUTTON FUNCTIONS
APP FUNCTIONS

FCC/IC STATEMENT
EN 7
1.Do not place product near any heat source such as radiators, stoves, fireplaces, etc.
2.Do not use in a bathroom.
3.Do not secure the wiring of the product with staples or nails or place on sharp hooks
or nails.
4. Do not close doors or windows on the product or product cord as this may damage the
wire insulation.
6. Do not operate unit with damaged plug.
5.Do not cover the product with cloth, paper or any material not part of the product when
in use.
7. Do not operate unit if it has been subjected to damage in anyway.
CAUTION:
1. Always ensure light set is unplugged when installed.
2. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric
shock it should not be played with or placed where small children can reach it.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit
accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
d'encompromettre le fonctionnement.
*RF warning for Mobile device:
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan
uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith
minimumdistance20cmbetweentheradiator&yourbody.
3.Do not use this product for other than its intended use.
WARNING:

EN 8
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
operation.
Warning: Please note that changes or modifications of this product is
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not inst-
alled and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following me-
●Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the
●Consult the dealer or an experienced radio/TV technician for help.
asures:
receiver is connected.
NOTE: This equipment has been tested and found to comply with the limits for a
FCC STATEMENT
Dongguan Newone Trading Co.,Ltd.
1001 Room, No.273, Jinxiu Road,
Changan Town, Dongguan City,
Guangdong, Prov., China
866-205-9854
[email protected]
The Honeywell Trademark is used
under license from Honeywell
International Inc.
Honeywell International Inc. makes
no representations or warranties
with respect to this product.
This product is manufactured by
Dongguan Newone Trading Co.,Ltd.