DF-61055:C • 3/7/2022 — Page 1 of 2
W-BG12LX(A) &
W-BG12LXSP
SWIFT Wireless Pullstations
Power Supplies/Accessories
DF-61055:C • D-60
The Fire•Lite® SWIFT® addressable pull station is a dual-action,
manual pull station with a key-lock reset feature that provides one
addressable alarm initiating input. The pull station features similar
aesthetic design and durable construction characteristics as the
wired counterpart to blend seamlessly throughout the environment.
The device communicates to the Fire Alarm Control Panel (FACP)
through the SWIFT mesh network and gateway, and is powered by 4
batteries offering a 2-year, UL listed battery life.
Installation is fast and straightforward by using a mounting plate that
can be surface mounted. Once the mounting plate is firmly attached
to the wall, the pull station is snapped into place and locked down
with 3 screws.
The mechanical operation is simple and easy to use in an emer-
gency with a PUSH IN/PULL DOWN handle that latches in the down
position to clearly indicate the station has been operated while the
word “ACTIVATED” appears on top of the handle in bright yellow, fur-
ther indicating the operation of the station.
The wireless pull station meets the Americans with Disabilities Act
Accessibility Guidelines’ (ADAAG) controls and operating mecha-
nisms guidelines (section 4.1.3[13]) and the Americans with Disabil-
ities Act (ADA) requirement for a 5-pound maximum pull force to
activate the pull station and conforms to ANSI/UL Standard 38.
The SWIFT wireless system offers intelligent (addressable) devices
which provide secure, reliable communication to the FACP across a
Class A mesh network. Wireless devices create an opportunity for
applications where it is costly (concrete walls/ceilings, buried wires),
obtrusive (surface mount conduit), or possibly dangerous (asbestos)
to use traditional wired devices. In addition, both wired and wireless
devices can be present on the same FACP providing an integrated
wired-wireless solution for increased installation potential.
The mesh network within the SWIFT system creates a child-parent
relationship between the devices so that each device has two par-
ents providing a second path for communications on every device. If
one device can no longer operate for any reason, the rest of the
devices can still communicate with each other, directly or through
one or more intermediate devices. Once an initial mesh network is
formed, mesh restructuring automatically occurs to find the stron-
gest paths possible within the network.
The SWIFT system also engages frequency hopping to prevent sys-
tem interference whether intentional or accidental.
Features
• Easy, fast, wireless installation
• Participates in a Class A mesh network
• Built-in tri-color LED, which is visible through the handle of the
station, flashes in normal operation and latches steady red when
in alarm
• Handle latches in down position and the word “ACTIVATED”
appears to clearly indicate the station has been operated
• Maintenance personnel can open station for inspection and
address setting without causing an alarm condition
• Standard “code wheel” for setting the SLC address
• For use in commercial applications
• Smooth dual-action design
• Meets ADAAG controls and operating mechanisms guidelines
(Section 4.1.3[13]); meets ADA requirement for 5lb. maximum
activation force.
• Meets UL 38, Standard for Manually Actuated Signaling Boxes
• Highly visible
• Made of durable polycarbonate material
• Attractive shape and textured finish
•Keyreset
• Includes Braille text on station handle
Compatible Control Panels
NOTE: Refer to panel documentation for UL/ULC compatibility.
• ES-50X/C
• ES-200X/C
• MS-9200UDLS (UL applications)
• MS-9600(UD)LS(UL applications)
