HOOKE ROAD BXG.8207 User manual

Bed Rack
(1)Contents:
(2)Tools required:
BXG.8207
A. 6mm HEX Socket Wrench;

(3)Installation time:
About 1.5 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8207), please scan the QR code.

(4)Installation instruction:
Step 1:
Assemble “C1”, ”C2”, ”C3” and “D” with those bolts(H, J, K, L). As the
picture show.

Step 2:
Lift the three brackets into your car. Adjust the installation position
according to your need. Connect the three brackets together with the Part ”A”
using those bolts(H, J, K, L). As the picture show.
Notes: Don’t tighten all the bolts.

Step 3:
Install the Part “B” into both sides of the three brackets with those bolts(H,
J, K, L).
Notes: Don’t tighten all the bolts.

Step 4:
Install the Part “E” with those bolts(H, J, K) to fix the rack. Tighten all the
bolts.

Step 5:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts
The installation location of the Spare Tire
(Using the Part “F”, ”I”, “M”, N”)