HOOKE ROAD BXG.3024 User manual

WindShield Frame Cover
(1) Contents:
Qty
Part Name
Size(mm)
Qty
Part Name
Size(mm)
1
ViCowl Assembly
M×4
Split Lock Washer
D8
H×4
Button Head Socket Cap Bolts Screws
M6*55
N×6
Split Lock Washer
D10
I×4
Button Head Socket Cap Bolts Screws
M8*40
O×4
Flat Washer
M6*16*1
J×6
Button Head Socket Cap Bolts Screws
M10*25
P×4
Flat Washer
M8*20*1
K×14
Carriage Bolts
M8*16
Q×6
Flat Washer
M10*25*1
L×4
Split Lock Washer
D6
R×14
Acorn Hex Cap Dome Head Nuts
M8
BXG.3024

(2) Tools required:
(3) Installation time:
About 1-2 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.3024), please scan the QR code.
a. 13mm Shallow Socket;
b. 4mm Hex Bit Socket;
c. 5mm Hex Bit Socket;
d. 6mm Hex Bit Socket.

(4) Installation instruction:
Step 1:
Assemble the Part “C” & “D” with those bolts (K,R).
Step 2:
Assemble the Part “B” & “C” with those bolts (K,R).

Step3:
Assemble the Part “A” & “B” with those bolts(K,R).
Step4:
Install four lights into the light insert.

Step 5:
Use the Part “F” to install it into Part “E”. Install the Part “E” into the car
cowl side trim.
You need to pierce those holes to install the screws.

Repeat the installation steps in the other side.
Step 6:
Place the ViCowl on the brackets and attach the ViCowl to the brackets
with those bolts(H,I,P,Q,M,N).

Tighten up all of bolts in order.

Step 7:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!

Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts