HOOKE ROAD BXG.4007 User manual

Tacoma Roof Rack
(1) Contents:
(2) Tools required:
a. 13mm wrench;
b. 12mm wrench;
c. 5mm socket wrench (5 mm
Allen wrench);
d. 4mm socket wrench （4 mm
Allen wrench）;
BXG.4007

(3) Installation time:
About 2 hours, 2-3 people may be needed. Installation time may
differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.4007), please scan the QR code.

(4) Installation instruction:
Step 1:
Begin by cleaning the Tacoma’s roof
and prepare all the roof rack components
to start the installation.
Step 2:
Install the Part E into the Tacoma’s roof.
Note: Don’t tighten up the bolts this step.

Step 3:
Install the corresponding Part B into the two mounting brackets as the
following pictures shown.
Step 4:
Install the front cross bar(Part A) to the steel structure.

Step 5:
Install another Part B into the two mounting brackets and connect
with the front cross bar.
Step 6:
Install the cross bars(Part D) which are carved with number
1,2,3,4,5 in order.

Step 7:
Install the rear cross bar(Part C) into the steel structure.
Step 8:
Check and tighten up all the
bolts.

Step 9:
Install the 4 LED spotlights
on the front cross bar.
Once you have everything in place you are finished with the
installation.Congratulations on the purchase and installation of a
quality Hooke Road product!

Attention:
1.The product parts in this instruction may differ slightly from
the actual product contents but generally does not affect the
installation of the product.
2.Please feel free to contact your distributor if you have any
kind of question about your purchase.
Hooke Road to find your parts