HOOKE ROAD BXG.8202 User manual

Front Bumper
(1)Contents:
(2)Tools required:
BXG.8202
A. 19mm Socket Wrench;
B. 18mm Wrench;
C. 13mm Wrench;
D. 5mm HEX Socket Wrench;

(3)Installation time:
About 1-2 hours, 2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8202), please scan the QR code.

(4)Installation instruction:
Step 1:
Remove the original bolts. Ready to install this bumper.
Step 2:
Assemble the Part “D” & ”E” into your car with those bolts(H, N, O).

Step 3:
Assemble the Part “A” & the Part “B” with those bolts(H, N, O, P).

Step 4:
Install the D-Rings. As the picture showed.
Step 5:
Assemble the Part “B” & the Part “C” with those bolts(I, M, L, S).

Step 6:
Install the assembled bumper to your car frame with those bolts(H, N, O,
P).

Step 7:
Install the Part ”U” with those bolts(K, R, Q, T).

Step 8:
Lif up the bumper. Adjust the position of the bumper. Tighten all the bolts.

Step 9:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind of
question about your purchase.
Hooke Road to find your parts