HOOKE ROAD BXG.4202 User manual

Front Bumper
(1) Contents:
Qty
Part Name
Size(mm)
Qty
Part Name
Size(mm)
1
Front Bumper Assembly
P×4
Flat Washer
M8*16*1
H×10
Hex Bolt
M12*30
Q×2
Flange Hex Lock Nuts
M8
I×4
Hex Bolt
M8*20
R×2
Flat Washer
M8*16*1
J×2
Button Head Socket Cap Bolts Screws
M8*20
S×2
Flat Washer
M12*30*1
K×4
Button Head Socket Cap Bolts Screws
M6*20
T×2
Nylon Round Spacer
M6*12*1.3
L×10
Split Lock Washer
D12
U×20
Flat Washer
M12*30*1
M×4
Split Lock Washer
D8
V×10
Hex Nuts
M12
N×2
Split Lock Washer
D8
W×2
Flange Hex Lock Nuts
M8
O×2
Split Lock Washer
D6
X×4
Nylon Insert Lock Nut
M6
BXG.4202

(2) Tools required:
(3) Installation time:
About 1.5 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.4202), please scan the QR code.
a. 19mm Shallow Socket;
b. 10mm & 13mm Wrench;
c. 14 mm & 19mm Wrench;
d. Drive Socket Wrench;
e. 4mm & 5mm Hex Bit Socket;

(4) Installation instruction:
Step 1:
Remove the original front bumper. As the picture shown.
Step 2:
Assemble the Part “A“ & the Part “B“ with the Part “I“, “J“, “M“, “N“.

Step 3:
Assemble the Part “B“ & the Part “C“ with the Part “H“, “J“, “L“, “O“.

Step 4:
Assemble the Part “B“ & the Part “C“ with the Part “K“ & “X“.
Step 5:
Stick the Part “E“ into the edge of the bumper.

Step 6:
Prep to install the bumper with the original bolts.

Step 7:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts