HOOKE ROAD MMR.30016 User manual

Security Deck Enclosure
(1) Contents:
Qty
Part Name
Size(mm)
Qty
Part Name
Size(mm)
1
Security Deck Enclosure Assembly
L×6
Plastic Washer
M6.2×11×4
H×14
Button Head Socket Cap Screw
M6×12
M×4
Flat Washer
M8×20
I×2
Button Head Socket Cap Screw
M6×16
N×20
Flat Washer
M6×20
J×12
Flange Hex Lock Nuts
M6
AA×10
Tie-Down Rings
K×6
Nylon Insert Locknut
M6
Q×2
Black Rubber cushion
18×50
MMR.30016

(2) Tools required:
(3) Installation time:
About 1-2 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (MMR.30016), please scan the QR code.
a. Drive Socket Ratchet Wrench;
b. T50 Torx Bit Socket;
c. 4mm Hex Bit Socket;
d. 10mm Shallow Socket;

(4) Installation instruction:
Step 1:
Put down the rear seat.
Step 2:
Install the Part”F” with original bolts and Assemble the Part ”D1”, “D2” &
“E1”, “E2” with the Part “ H”, “J”, “N”, “K”, “AA”.

Step3:
Assemble the Part ”C” & “D1”, “D2” with the Part “ H”, “J”, “N”, “K”.

Step 4:
Install the Part ”G” into the Part “A” with the Part “L”, “K”. Assemble the
Part “A” & the Part “C” with the Part “I”, “L”, “M”, “K”.

Install the Part “B”
Install the black rubber
strip with the glue.

Step 5:
The installation is complete. We hope you enjoy a wonderful off-road life
with this quality Hooke Road product!
Attention:
1.The product parts in this instruction may differ slightly from the
actual product contents but generally does not affect the installation
of the product.
2.Please feel free to contact your distributor if you have any kind
of question about your purchase.
Hooke Road to find your parts