HunterDouglas Duette AE M25S Installation manual

English Version 1.0
Quick Programming Instruction
M25S 24V motor
Duette®/Pleated Shades (AE/BE models)

Colophon
This bulletin remains the property of
Hunter Douglas. Its contents are strictly
condential and may not be reprinted,
copied, reproduced or multiplied in
whatever form. It must be returned upon
request by Hunter Douglas.
The information presented in this manual
serves to inform our customers. The
manual is based upon general information
concerning constructions, material
properties and operating procedures as
they are known to us at the moment of
publication. That is why this manual is
subject to change or additions at all times.
Hunter Douglas reserves the right to make
any changes and/or additions deemed
necessary.
Because of the afore-mentioned reasons,
this assembly manual is not a manual for
installation, use or maintenance of products
by Hunter Douglas®. If a user of products
by Hunter Douglas®has any questions
or experiences any difculties during the
use and/or maintenance of such products,
Hunter Douglas should be contacted.
© - 2018 – Hunter Douglas Europe BV
® - Registered Trademark of Hunter Douglas
Printed in the Netherlands
Publication number
11-M-03EN-V10
Release date
12-02-2018

3
Version 1.0Quick Programming Instruction M25S Duette®/Pleated Shades (AE/BE models)
11-M-03EN-V10
CONNECTING THE SHADE
01-F0710.0

4Quick Programming Instruction M25S Duette®/Pleated Shades (AE/BE models)Version 1.0
11-M-03EN-V10
LIMIT SETTINGS
X
HOLD
X = Factory reset
Press and hold I or II until the blind moves (for 5 seconds)
off
Press and hold I or II until the blind stops by itself in top position.
Off = Normal operation
ᆲ
ᆱ
B
Press II or I until desired bottom limit is reached.
B = Bottom limit setting
A
A = Top limit setting
Blind must be down at least 200 mm before setting top limit.
Press I or II and hold until the blind stops by itself.
200 mm min.
ᆰ
11-A0094.0