iCandy pear User manual

iCandy pear instruction manual
MPORTANT
Keep for future reference
Read these instructions carefully before use and keep them for future reference.
Your child’s safety may be affected if you do not follow these instructions.
WARN NG! t may be dangerous to leave your child unattended.
Safety tested and certified to BSEN1888:2003 for the UK and Europe,
ASTM F833-08 for the USA and SOR-85-379 for Canada.
Tested to ensure compliance with the Furniture and Furnishings (Fire) (safety) Regulations.
The iCandy pear is a quality product designed and distributed by:
iCandy World Limited
Montgomery Way
Biggleswade
Bedfordshire
SG18 8UB
England
F: [phone]
Email: [email protected]
www.icandyworld.com
© iCandy World Limited.
iCandy pear

iCandy pear
j
d
f
g
l
h
c
m & n
a
e
i
k
b
123
456
789
10 11 12
2
1
3

iCandy pear
13 14 15
16 17 18
19 20 21
22 23 24
25 26 & 27 28
3332
12
3
313029
34
35 36

iCandy pear
37 38 39
40 41 42
43 44 45
46 47 48
50 5149

iCandy pear
1. Folded/hold together latch
To release the folding strap depress both
indicated clips simultaneously. #-.8 1&9(-
2:89'**3,&,*)'*+47*8947&,*
2. To open
To open the iCandy pear stand behind the
pushchair and, with both hands on the
pushbar, pull-up until the iCandy Pear
clicks into place.
 $! 38:7* 9-&9 &11 9-*
14(0.3, )*;.(*8 &7* *3,&,*) '*+47*
:8*
3, 4, 5 and 6. Fitting the front
wheels support tube
Slacken, remove and retain 4 x bolts
securing the noseplate using the allen key
provided (2 x short, 2 x long bolts). Note:
Retain lock nuts located in the lower plate.
Separate upper and lower noseplate
housings.
Place the front wheel support tube onto the
lower noseplate and align.
Align the upper noseplate and secure using
the original bolts and locknuts. #&0* (&7*
94 *3,&,* &11 +4:7 '4198 '*+47* +:11>
9.,-9*3.3, 94 *;*3 9*38.43 :8.3, 9-*
&11*30*>38:7*9-7*&)4+'4198*=9*3)8
9-74:,-14(03:98
7. Fitting the brake bar/rear axle
assembly
Turn the iCandy pear upside down.
Position the brake bar / rear axle assembly
with the brake levers uppermost. Once the
rear axle assembly is secure to the main
chassis pull firmly on each side of the
combined brake bar / rear axle assembly to
check that the assembly on both sides is
securely locked into place.
8. To fit the rear wheels
Lift locking locating catch. Place the wheel
into the axle. Release locking locating
catch and wheel should lock into position.
Pull on wheel to ensure that it is securely
fitted. This process is repeated for the other
side. nflate the tyres to 20-25 psi (1.5-2
bar). Useful tip; apply a smear of vaseline
to the wheel shaft to weatherise and ease
engagement. !*,:1&71> (-*(0 9>7*
57*88:7*8 .3+1&9*) 9>7*8 2&0* 9-*
5:8-(-&.7*&8.*7945:8-&3)89**7
9.Fitting the front wheels
Fit the front wheel assemblies onto the
support tube. Ensure the wheel assembly is
fully engaged (note on underside locking tab).
10. Using the brakes
To apply brake, press down gently on the
middle of the brake bar. Rocking the
pushchair assists engagement. To release
brake, place foot under brake bar and pull
upwards.
 $! 1<&>8 &551> 9-*
'7&0*8 <-*3 9-* 5:8-(-&.7 .8
89&9.43&7>
11. Handle height adjustment
There are seven handle height positions. To
adjust, press the grey button and pull up
simultaneously to desired level.
iCandy pear instructions
Family Flexibility
You have invested into the most modern
versatile, flexible tandem stroller currently
available. Whether as a complete iCandy
pear tandem or iCandy apple/pear
converter, your pushchair has over twenty
options/combinations integrating reclining
seat units, lie flat carrycots and infant car
seats. ts modular design enables it to fold
to the size of a single pushchair and a
maximum individual component weight of
10kgs.
Safety First
Correct use and maintenance of your
pushchair is essential. Please take the time
to fully and carefully read this instruction
manual. f you require any further advice or
assistance when using your pushchair,
please contact the place of purchase.
 $! $.9- 9-* *=(*59.43
4+ 9-* 4:9*7 5&(0&,.3, (&7943 94
57*;*39.3/:7>+742(-40.3,7*24;*
&3) .22*).&9*1> ).8(&7) &11 49-*7
5749*(9.;* 5&(0&,.3, 43 9-.8
574):(9
The iCandy pear is tested to comply with
BSEN 1888:2003 and is tested to ensure
compliance with the Furniture and
Furnishings (Fire) (Safety) Regulations.
Follow these simple instructions to
assemble your iCandy pear.
Box 1
aRear wheels x 2
bBrake/rear axle
cChassis
Box 2
dLower seat unit
eUpper seat unit
fP P subframe
gFront wheel support tube
hBumper bar/carry handle lower
iBumper bar/carry handle upper
jSeat/carrycot canopy (hood) lower
kSeat/carrycot canopy (hood) upper
lFront wheels x 2
mRaincover lower
nRaincover upper
Components not shown
Allen key, pump, bumper bar/carry handle
blanks x 2.
Components sold separately
Upper and lower carrycot fabrics, pair of
upper and lower car seat adaptors.
NOTE:
Lower components are colour coded
YELLOW and upper components are
colour coded BLUE.
Useful tip
New products are sometimes stiff to
engage and operate. We recommend ALL
adaptors and connector parts be lightly
lubricated with a silicone based furniture
polish. This is best achieved by spraying
polish onto a soft cloth and applying to
relevant parts.

iCandy pear
Latching and reclining of the seat is similar
to the lower seat.
25. Assembled Seat Units
Assembled seat units with hoods, bumper
bars on the P P subframe.
26. Reclining the seat unit
To recline the upper and lower seat units
press the grey buttons on both sides and
move into required reclined or upright
position. Release buttons when in desired
position. Ensure both grey buttons are
latched flush with the side frame moulding.
27. Removal of Seat Units
Depress both grey side buttons and pull up
seat frame to remove.
 $! -*(0 9-&9 9-* (&7
8*&9.8(477*(91>*3,&,*)'*+47*:8*
28. Fitting the Maxi Cosi Car Seat
adaptors - Lower position (sold
separately)
Locate and fit the lower car seat adaptors,
coded Yellow by pushing them into P P
subframe, ensure the grey buttons latch flush.
29. Fitting the Maxi Cosi Car Seat
- Lower position
Fix the car seat onto the adaptors, ensuring
the car seat latches (clicks) secure.
30. Fitting the Maxi Cosi Car Seat
adaptors - Upper position (sold
separately)
Locate and fit the upper car seat adaptors
(as supplied with the iCandy apple
pushchair or purchased separately), coded
Blue by pushing them into P P subframe,
ensure the grey buttons latch flush.
31. Fitting the Maxi Cosi Car Seat
- Upper position
Fix the car seat onto the adaptors as
shown, ensuring the car seat latches
(clicks) secure.
32. Removal of Maxi Cosi Car
Seats
Depress both release buttons as shown, lift
car seat to remove.
33. Securing your child using the
5-point safety harness
Feed the buckle tongues 1 & 2 into the
buckle housing 3 and click together.
Adjust your five-point harness at the points
indicated in the direction of the double
arrows as required.
To unfasten the harness squeeze in the
buckle tongues 1 & 2 and pull out of the
buckle housing 3.
D-Rings are provided for attaching an extra
harness complying to BS 6684.
 $! #4 &;4.) 8*7.4:8
.3/:7>&1<&>8:8*9-*54.398&+*9>
-&73*88
12, 13 & 14. Folding the chassis
Remove all seat units, P P subframe and
adaptors from chassis before folding.
Unload all products from the shopping
basket. Press the grey handle height
adjuster button 1 whilst depressing the
secondary lock button 2. When the handle
is at its lowest point, push downwards to
disengage and fold the stroller 3. Apply the
hold together latch as per picture 1.
 $! #-* 2&=.2:2 14&)
+479-*8-455.3,'&80*9.80,
15, 16, 17 & 18. Fitting the P P
Subframe
Unfold and engage the P P subframe into
the chassis receptors. Apply firm
downward pressure on the centre of the
subframe until clicks are heard to ensure
positive locking. To release, push down on
the P P subframe and depress both grey
side buttons before removing from the
connectors on the chassis. The P P
subframe is hinged for compact storage.
Check the location of the ‘upper saddle’ on
the forward basket frame. Align as
necessary.
Check the location of the ‘lower saddle’ on
the rear basket frame. Align as necessary.
The P P subframe can be fitted in 2 ways
depending on the combination you are wanting
to achieve. See the iCandy pear options.
19. Seat unit/carrycot canopies
(hoods)
dentify and fit the colour coded hoods to
the seat frame connectors. To remove,
depress the hood location side tabs and
release.
20. Bumper bars
dentify and fit the colour coded bumper
bars, locking and releasing is actioned by
depressing small headed grey buttons
simultaneously. Check to make sure they
are secure by pulling on the bars.
21. Adjusting the footrest
Press both buttons on the sides of the leg
rest, adjust to desired position and release
to lock.
22. Bumper bar blanks
Bumper bar/carry handle blanks can be
fitted if preferred.
23. Fitting the seat units colour
coded Yellow.
nsert the seat adaptor into the lower
connectors on the P P subframe colour
coded yellow. The seat unit adaptors and
connectors are grooved to prevent
incorrect orientation.
 $! #-.8 8*&9 .8 349
8:.9&'1*+47(-.1)7*3:3)*72439-8
$! -*(09-&99-*57&2
'4)> (&77>(49 47 8*&9 :3.9
&99&(-2*39 )*;.(*8 &7*  (477*(91>
*3,&,*)'*+47*:8*
24. Fitting the seat units colour
coded Blue.
nsert the seat adaptor into the upper
connectors on the P P subframe colour
coded blue. The seat unit adaptors and
connectors are grooved to prevent
incorrect orientation.

34, 35 & 36. Fitting the PVC Raincover
Fit raincover over hood and around the
back of the seat before pulling over footrest.
 $! *;*7 1*&;*
7&.3(4;*78-44)8&3)&574384347
4;*79-*5:8-(-&.7.3)4478.3&-49
&92485-*7* 47 3*&7 & -*&9 84:7(*
>4:7(-.1)2&>4;*7-*&9
Conversion of seat unit to
carrycot
Box 1
aCarrycot fabric x 1
f lower carrycot has been purchased it will
be colour coded yellow.
f upper carrycot has been purchased it will
be colour coded blue.
37. Remove hood
Depress hood hinge tabs and release from
connector sockets. Retain for re-fitting as
seat unit and carrycot hoods are common.
38. Remove bumper bar (if fitted)
Simultaneously depress small grey buttons
and release bumper bar away from frame.
Retain bumper bar for re-fitting as carrycot
handle.
39, 40, 41 42, & 43. Converting the
seat unit
Unfasten all the seat unit zips surrounding
the frame and footplate. Disengage both
halves of the zips.
With the seat unit facing downwards,
release the velcro tabs on the underside of
the seat base adjacent to leg rest support
tube as shown.
Release seat support panel clips shown
pressing down simultaneously with your
thumbs.
Withdraw seat support panel from seat
fabric cover. Retain and store in a safe
place.
Finally, release secondary webbing straps
by splitting split ring out of webbing loops.
The frame is now ready for fitting of
carrycot fabrics.
44. Fitting of carrycot fabrics
Slip the leg rest section of the seat frame
into the carrycot fabric shown ensuring
footplate locates through the slot.
45. Secure secondary webbing straps by
threading split ring through webbing loops
on both sides of the frame.
46. Fold upper edge rim of fabric over
frame. Locate and fasten all zips securely.
47. Cover leg rest support tube with
internal velcro panel as shown.
48. Locate, position and attach press
stud to footplate are as shown.
49. Locate and fasten apron zips on both
sides. Apron can be tucked inwards at
foot end of carrycot if not required.
50. Adjust the internal depth of each
carrycot as required (dependent upon
configurations) by locking under base
clips together as shown.
51. Base plate must be removed for
washing. Removal is achieved by
releasing velcro on underside of carrycot
at head end. Withdraw the base board.
Head and toe end support stiffeners are
located within zipped pockets as shown.
Please remove before washing the carrycot
fabric.
Take care as stiffeners are a tight fit. With
the stiffeners removed, the carrycot can be
folded flat for compact storage and travel.
Re-fit the hood as reverse of point 1.
25479&39 When re-fitting the bumper
bar/carry handle, check that no fabric
becomes entrapped. The handle locks
(clicks) into pace by depressing the small
grey button on each side. Ensure security
of handle before lifting or using carrycot.
Your carycot is now ready to use
Locate and fit carrycot as per fitting
instructions of the seat units within these
instructions.
Fitting of an additional safety mattress is
allowable and will assist in the hygiene and
cleaning maintenance of your carrycot.
25479&39 Make sure the mattress thickness
does not exceed 10mm.
Mattress Sizes:
Lower carrycot 67 x 27 cms
Upper carrycot 68 x 28cms
 $! #-* .&3)> 5*&7
(&77>(498 &7* 431> 8:.9&'1* +47
(-.1)7*3<-4(&33498.9:5:3&.)*)
7411 4;*7 &3) (&3349 5:8- .98*1+ :5
43 .98 -&3)8 &3) 03**8 &=.2:2
<*.,-9 4+ 9-* (-.1)   0, &5574= 
2439-8
 $! 4 349 1*9 49-*7
(-.1)7*3 51&> :3&99*3)*) 3*&7 9-*
(&77>(49
 $! 4 349 :8* .+ &3>
5&79.8'740*39473472.88.3,
 $! *;*7 :8* &
2&997*889-.(0*79-&322$-*3
& 2&997*88 .8 5:7(-&8*) 8*5&7&9*1>
.98-4:1)(43+47294"5&79

25479&39
1. Use only on a firm, horizontal, level and
dry surface.
2. The handles and the bottom of the
carrycots should be inspected regularly for
signs of damage and wear.
3. Be aware of the risk of open fire and
other source of strong heat, such as
electric bar fires, gas fires etc, in the vicinity
of the carry cot.
4. The iCandy pear carrycot is not a safe
means of transport by car and should
NEVER be used as such. Use an approved
car safety seat for transport by car.
&77>(49(1*&3.3,.3+472&9.43
The exterior of the carrycot, hood and
apron of the iCandy pear carrycot may be
cleaned with a damp cloth.
Unfasten from frame and remove
baseboard and end stiffeners. Hand wash
using a soft detergent at a maximum
temperature of 30 degrees (see instructions
on washing label). Do not place in washing
machine or tumble-dryer!
iCandy pear

iCandy pear
53 54 55
56 57 58
59 60 61
52. Single Pushchair option
Using the upper seat unit adaptors (colour
coded blue) you can convert your Pear into a
single pushchair at any time (rearward facing).
iCandy pear options
The iCandy pear has over twenty different
options to choose from to suit your
children's age and your preference.
Please note that the lower seat unit is
slightly smaller than the upper. This has
been designed to facilitate compact folding
and transportation of the seat units (the
lower seat fits inside the upper).
Toddler & newborn options
The combinations shown opposite are
ideal for a toddler and a newborn.
53 Lower carrycot - lie flat forward facing
- 0 - 3 to 6 months.
Upper seat unit - 3 position forward facing
- 3 to 6 months onwards.
54 Lower seat unit - 3 position forward
facing - 3 to 6 months onwards.
Upper seat unit - 3 position forward facing
- 3 to 6 months.
55 Lower car seat - forward facing
- 0 - 9 months.
Upper seat unit - 3 position forward facing
- 3 to 6 months onwards.
56 Lower carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
Upper seat unit - 3 position rearward facing
- 3 to 6 months onwards.
57 Lower carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
Upper carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
58 Lower seat unit - 3 position rearward
facing - 3 to 6 months onwards.
Upper car seat - rearward facing
- 0 - 9 months.
59 Lower car seat - rearward facing
- 0 - 9 months.
Upper seat unit - 3 position rearward facing
- 3 to 6 months onwards.
60 Lower seat unit - 3 position rearward
facing - 3 to 6 months onwards.
Upper carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
61 Lower seat unit - 3 position forward
facing - 3 to 6 months onwards.
Upper car seat - rearward facing
- 0 - 9 months.
52

Twin options
The combinations shown opposite are
ideal for twins. Twins can be different in
weight, height and development. These
options will help accommodate their
differences.
62 Lower carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
Upper carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
63 Lower seat unit - 3 position rearward
facing - 3 to 6 months onwards.
Upper seat unit - 3 position rearward facing
- 3 to 6 months.
64 Lower seat unit - 3 position rearward
facing - 3 to 6 months onwards.
Upper carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
65 Lower carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
Upper seat unit - 3 position rearward facing
- 3 to 6 months onwards.
66 Lower car seat - rearward facing
- 0 - 9 months.
Upper car seat - rearward facing
- 0 - 9 months.
67 Lower carrycot - lie flat rearward facing
- 0 - 3 to 6 months.
Upper car seat - rearward facing
- 0 - 9 months.
68 Upper car seat - rearward facing
- 0 - 9 months.
Lower car seat - forward facing
- 0 - 9 months.
 !## Use % in the
configurations illustrated within this
instruction leaflet.
iCandy pear
62 63 64
65 66 67
68

Safety WarningS
& $! 92&>'*)&3,*74:894
1*&;* >4:7 (-.1) :3&99*3)*) 1<&>8
0**5 >4:7 (-.1) .3 ;.*< <-.1*
5:8-(-&.7.8.3:8*
' $! 1*&8**38:7*9-&9>4:7
(-.1) <*&78 & (477*(91> +.99*) &3)
&)/:89*) -&73*88 &9 &11 9.2*8 47
*=97& 8&+*9>   7.3, 14458 &7*
574;.)*) +47 9-* &99&(-2*39 4+ & 
8*5&7&9* 8&+*9> -&73*88 .+ )*8.7*) 
&5574;*)94"
( $! **5 (-.1)7*3 (1*&7 4+
24;.3, 5&798 '*+47* 2&0.3,
&)/:892*398 #4 &;4.)  *397&52*39
0**5 >4:7 4<3 &3) >4:7 (-.1)7*38
+.3,*78 (1*&7 4+ &3> +41).3, 5&798
;*714&).3, .3(477*(9 +41).3, &3)
9-*:8*4+343&5574;*)&((*8847.*8
2&> )&2&,* '7*&0 47 49-*7<.8*
7*3)*79-*5:8-(-&.7:38&+*+47:8*
) $! 4349 &114< >4:7 (-.1)
94 (1.2' :3&88.89*) .394 9-*
5:8-(-&.7
* $! #-.88*&9.83498:.9&'1*
+47(-.1)7*3:3)*72439-8
+ $! 4349:8*7*51&(*2*39
5&79847&((*8847.*8*,(-.1)8*&98
'&, -4408 7&.3 (4;*78 *9( 49-*7
9-&39-48*&5574;*)'>.&3)>
, $! 4 349 4;*714&) 9-*
5:8-(-&.7 <.9- &)).9.43&1 (-.1)7*3
-*&;> 5&(0&,*8 ,44)8 47
&((*8847.*8 &,8 &3) 49-*7 .9*28
2:89 349 '* -:3, +742 9-* -&3)1*
'&78&89-*>2&>)&2&,*9-*+7&2*
4749-*7<.8*(&:8*9-*5:8-(-&.7 94
'*(42*:3'&1&3(*)&3)9.54;*7
- $! 41)4394>4:75:8-(-&.7
<-*3 (148* 94 &3> 24;.3, 74&)
;*-.(1*4797&.3;*3<.9-9-*'7&0*8
439-*)7&:,-9+7429-*;*-.(1*2&>
(&:8* 9-* 5:8-(-&.7 94 24;* #-*
5:8-(-&.78-4:1)431>'*:8*):3)*7
&):198:5*7;.8.43
. $! 4349:8*9-*5:8-(-&.7
.3 & 2&33*7 +47 <-.(- .9 .8 349
)*8.,3*)
/$! +9-*5:8-(-&.7.894
'*:8*)'>842*43*:3+&2.1.&7<.9-
.9 *, '> ,7&3)5&7*398 &1<&>8
8-4<9-*2-4<.9<4708
0 $! 1<&>8 :8* 9-* (749(-
897&5 .3 (42'.3&9.43 <.9- 9-* <&.89
'*19
1 $! *;*7 :8* 9-* (&77>(49
43&89&3)
2$! #-.8 574):(9 .8 349
8:.9&'1*+477:33.3,4780&9.3,
3 $! 1<&>8 0**5 9-.8
3897:(9.43 &3:&1 <.9-  9-* .&3)>
5*&75:8-(-&.7&3)+47+:9:7*:8*
General nstructions
•Use the iCandy pear for one child or two
children at a time.
•The iCandy pear is suitable for children
from birth to approx 4 years (up to 20kg),
and when seated, the midpoint of the
child's head is at or below the top of the
stroller seat. The maximum weight
allowance for use with a Maxi-Cosi
nfant Carrier is 13kgs. The maximum
weight allowance for the iCandy pear
carrycot is 9kgs.
•t is recommended that you do not use
the iCandy pear seat units until
your child is able to sit up unassisted,
usually at around 6 months.
•Make sure the iCandy pear is fully
unfolded and locked before placing your
child in it.
•Keep your child away from all moving
parts when folding, unfolding or
adjusting the pushchair.
•Always apply brakes when parking, even
when standing still for a few moments.
•nspect and clean your pushchair
frequently. Never use abrasive cleaners
or lubricants.
•Never lift the iCandy pear or use
escalators or stairs when there is a child
in it.
•Use original accessories and
manufacturer-approved parts only.
Failure to do so may affect your
warranty.
•Do not make any changes to this
product. f you have any problems or
complaints, contact your retailer or
importer.
•To avoid the risk of suffocation, keep all
plastic packaging materials out of the
reach of children.
•The iCandy pear has been approved in
accordance with BSEN1888:2003 for
the UK and Europe, ASTM F833-08 for
the USA and SOR-85-379 for Canada.
iCandy pear
!

iCandy pear
• GENERAL SAFETY - Open fires and
heating appliances, particularly portable
types, must be guarded by a nursery type
fireguard. To avoid burns, keep your child
away from hot liquids, cookers, radiators,
portable convectors, flexes, fireplaces etc.
Use a stair gate at all times.
• NOTE n the interest of customer care
and product development, we review the
quality of our products on a daily basis.
We reserve the right to modify or amend
the specification of our products and their
parts without prior notice.
Product Care and maintenance
#-* .&3)> 5*&7 5:8-(-&.7 7*6:.7*8
7*,:1&72&.39*3&3(*'>>4:
•Regularly inspect the locking devices,
brakes, harness assembly, catches, seat
adjusters, joints and fixings to ensure
they are secure and in full working order.
•The brakes and wheels are subject to
wear and should be replaced as and
when necessary.
•Should any parts of your iCandy pear
pushchair become stiff or difficult to
operate, ensure that dirt is not the
cause. Then try a light application of a
sprayable lubricant e.g. silicon spray,
ensuring that the lubricant penetrates
between the components, but take care
as excessive application may encourage
the accumulation of dirt. Regular light
lubrication of moving parts will extend
the life of your pushchair and make
opening and folding easier.
•Do not leave the iCandy pear pushchair
in sunlight for prolonged periods as the
colour of some fabrics may fade.
•Store the pushchair in a dry, well
ventilated and safe place.
•Your pushchair should be serviced and
reconditioned before using it for a
second baby, or within 18 months,
whichever is the sooner. This can be
arranged by contacting your iCandy
dealer.
Product Care and maintenance
•The plastic and metal parts of the
pushchair may be sponged clean with
warm water and a mild detergent.
•The seat unit may be cleaned by
sponging lightly with warm water and a
mild detergent.
•Never clean with abrasive, ammonia or
bleach-based and spirit-type cleaners.
•Allow all parts to dry thoroughly before
storing.
•After exposure to wet or damp
conditions, leave the pushchair fully
opened in a warm, well-ventilated
environment. Dry it off with a soft, lint
free and absorbent cloth. Residual
moisture, left unattended, will
encourage mildew or rust to form,
damaging the pushchair.

iCandy pear
Warranty
Our products are warranted against
defects in materials and workmanship for a
period of two years from date of purchase.
The warranty period for an iCandy pear
carrycots is six months from date of
purchase. f the product has a
manufacturing fault we will repair it for free.
f it is not practical to repair it we will, at our
discretion replace the part in question. f
the product fails due to wear and tear,
accident, neglect or negligence, or is
outside the warranty we will happily repair
it for a reasonable charge.
#-* <&77&39> (4;*78 9-* 47.,.3&1
5:7(-&8*7 ':>.3, 9-* 574):(9 +742
&3 &:9-47.8*) )*&1*7 744+ 4+
5:7(-&8*.87*6:.7*)
The warranty covers workmanship or
materials that are deemed faulty, providing
the pushchair has at all times been used in
normal conditions, in accordance with
instructions, and been properly maintained.
The warranty does not cover second hand
product, modified product, poorly
maintained product, normal wear, fading
and fabric cuts, improper use (by way of
example): abnormal use; not following
instructions; child left unattended; safety
harness not used; excessive load;
transport damage i.e. airline or freight
damage.
Customer costs within warranty include
inward freight charges to return the product
to manufacturer’s representative for
warranty and or service.
Manufacturer’s representative reserves the
right to charge a service fee and/or charge
for parts replaced/repaired. A return freight
charge may apply.
Exclusions. Any consequential loss or
damage to any person or property directly
or indirectly as a result of using product.
Please discuss any warranty or service
queries with your store of purchase. You
will be required to show proof of purchase.
They will inform you of the next step.
Products that are returned directly to
manufacturer by customer will NOT be
eligible for warranty.
1*&8* 7*,.89*7 >4:7 574):(9
5:7(-&8* 9-74:,- 4:7 431.3*
<&77&39> 7*,.897&9.43 '> ;.8.9.3,
<<<.(&3)>:0(42
1*&8* '* &);.8*) >4: 3**) 94
7*,.89*7>4:7 8*7.&1 3:2'*7 .347)*7
94 &(9.;&9* >4:7 9<4 >*&7
2&3:+&(9:7.3, <&77&39> %4:7 8*7.&1
3:2'*7 (&3 '* +4:3) 43 9-*
8-455.3,'&80*9'&74+>4:7897411*7
&3) 43 9-* 89&'.1.8.3, '&7 4+ 9-*
(&77> (49 9?8 & <-.9* 1&'*1 &3)
(1*&71> -&8 9-* <47) 8*7.&1 3:2'*7
<.9-).,.98&+9*7<&7)8#4&((*889-*
8*7.&1 3:2'*7 43 >4:7 897411*7
51*&8*7*24;*9-* 8-455.3,'&80*9
+&'7.(947*;*&19-*3:2'*7
iCandy pear accessories
Accessories available for the iCandy pear:
•Maxi-Cosi Upper and Lower Car Seat
Adaptors.
•Superfleece Luxury Footmuff - available
in a selection of colours.
•Core Seat Snuggle - available in a
selection of colours. (Not shown).
•Sun Parasol - available in a selection of
colours.
•Lifestyle Changing Bag available.
•Cup Holder available. (Not shown).
•Parasol/cupholder Clamp. (Not shown).
•Travel Bag available. (Not shown).
•Flavour Pack- available in a selection of
colours.