Iluminar iL5x User manual

USER
MANUAL
iL5x MODEL 440 W
1-877-540-5588
iluminarlighting.com
[email protected]
iL5x
LED Lighting Solutions
IL-5x26FSG-120
IL-5x26FSG-480

3
2
CONTENTS
• Observe all safety precautions (see page 8), seek the services of a
qualified electrician, installation professional, or call ILUMINAR Lighting
technicians for assistance.
• DO NOT handle or touch the fixture while in use.
• Connect the fixture only to the power sources of the appropriate voltage
using the correct AC plug type. Protect power cables from being pinched,
walked on, or otherwise damaged. Be especially careful where the power
cable enters the power outlet to the unit. Only connect the fixture to an
electrical outlet or extension cord of comparable standard and level
rating. Connect the fixture ONLY to the power sources of the correct
voltage using the plug received.
• The fixture should only be cleaned as directed. Always seek service for
your system by qualified service personnel if any of the following occur:
1. The fixture shows a noticeable change in performance.
2. The powersupply cord or plug is damaged.
3. The fixture has been dropped, or the exterior is damaged.
Please read this manual thoroughly prior to
installing or operating the ILUMINAR iL5x.
1-877-540-5588
iluminarlighting.com
[email protected]
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
LED Lighting Solution
1067 mm / 42”
1003 mm / 39”
129 mm / 5”
PPF
Efficacy
Input Current
Input Power
Output Voltage
Output Power
Min Power Factor
THD
Crest Factor
BTU
Rated Mains Voltage
Mains Frequency
Dimmable
Ambient Temperature
Max. Temperature
Relative Humidity
Plug Type
Color Temperature
Color Rendering Index
Finishing Mounting Height
Emitter Cooling
Light Distribution +/- 5%
Waterproof Rating
LED Lifespan (90% of Life)
1144 µmol/s
2.6 µmol/j
12.20A
440W
33V
402.6W
0.9
< 20%
0.99
1460
120-277V AC / 347-480V AC
50 / 60Hz
0-10V Controllable
-20..+45°C
75°C/167°F
98%
Power Cord Sold Seperately
4000k
88
6”-12” to top of Canopy
Passive / Extruded Case
125º
IP65 for Damp/Wet Conditions
55,000+ hours
TECHNICAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Length
Width
Height
Weight
1067mm
1003mm
129mm
13.5kg
42.01"
39.49"
5.08"
29.76lbs
VOLTAGE AND AMPERAGE
120V
208V
240V
277V
347V
480V
1.3A
0.94A
3.78A
2.16A
1.87A
1.63A
449W
442W
452W
445W
443W
440W
MODEL: WATTS: 440W
2.6
200-480V
VOLTAGE: 100-277V
SKU: IL-5x26FSG-480
IL-5x26FSG-120
MOUNTING & COVERAGE
1.2m / 4'
1.2m / 4'
15-30cm / 6-12”
iL5x 440W LED SPECTRUM
W
A
VELENGTH NM
Pre-Install Information ........................................
Technical & Physical Specifications ......................
Hardware & Accessories ....................................
Instructions .......................................................
Daisy Chain Instructions .....................................
PPFD Map .........................................................
Important Cautions & Warranty ..........................
2
3
4
5-6
7-9
10-11
12

4
HARDWARE AND ACCESSORIES
The iL5x can be hung from steel
cables or can be mounted to a
rack.
Before you begin installation,
check that you have all the
necessary parts to begin.
1 iL5x Fixture
1 Power Cable
4 Steel Hanging Cables with attached
cylindrical locks for hanging
IN THE BOX
1-877-540-5588
iluminarlighting.com
[email protected]
5
Lay the central mast on a flat table top or surface with the
attachment brackets facing UP. Attach each LED Bar by aligning the
plastic clips and carefully sliding them into place until you hear a
soft click.
CONNECTION INSTRUCTIONS
Once the plastic clips are all snapped in place, attach the A/C cables
coming from the mast to each LED bar by aligning the connector pins and
pressing the ends together. Lock by twisting in opposite directions.
Once all the LED bars are fastened into place and A/C cables are attached
to the mast, turn the fixture over (this may require more than one person).
Ensure the flat surface is clear of anything that could damage the delicate
diodes.
SLIDE
2
1
3
! CAUTION when handling your ILUMINAR iL Fixture.
The LED array should NOT come in contact with sharp
objects. DO NOT touch diodes or apply direct force to
the diodes as this can/will cause permanent damage.
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.

7
61-877-540-5588
iluminarlighting.com
[email protected]
HANGING INSTALLATION DAISY CHAIN CONNECTIONS
If you plan to utilize several LEDs in your room or facility, one of the many
benefits of the ILUMINAR LED is that you can “daisy chain” one fixture to another
to save space and use only one outlet to run several lamps, thus minimizing the
amount of cords used in your space.
If you plan to utilize the ILUMINAR HASH Controller, you can connect the connections
from the controller to the fixture and then connect the Daisy Chain Controller Cable from
fixture to fixture. Please consult with our lighting layout designers to vensure proper
spacing of outlets for your unique setup.
- Up to 3 iL5x Fixtures may be connected in series at 120V AC
- Up to 6 iL5x Fixtures may be connected in series at 277V AC
Attached the secure hooks to the fixture.
Loop the hanging wire as shown around the support beam (as shown
in Figure A). Press down at base of hook to slide to adjust the mounting
height of the fixture (Figure B).
Once fixture is hanging with all LED bars installed, connect the
power cable (blue tip) from the outlet to one side of the fixture.
1
2
3
FIGURE A
FIGURE B
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
1
4
A/C INPUT
(to power outlet)
Controller Cable
(to Controller)
AVAILABLE CABLES
A/C INPUT
(to power outlet)
Controller
Daisy Chain Cable
Controller Cable
(to Controller)
A/C Daisy
Chain Cable
1
4
2
3
IL LED IP67 120V Input Power Connection Cord
IL LED IP67 240V Input Power Connection Cord
IL LED IP67 277V Input Power Connection Cord
IL LED IP67 347V Input Power Connection Cord
IL LED IP67 Daisy Chain AC - Power Cord
IL LED IP67 Daisy Chain AC - Power Cord
IL LED Cord Set for LEDs Daisy Chain Dimmer
IL LED Cord Set for LEDs Daisy Chain Dimmer
IL LED Cord Set for LEDs (Fixture to Touch controller)
IL LED Cord Set for LEDs (Fixture to HASH controller)
IL LED Cord Set for LEDs (Original - Fixture to 2 Wire)
120V
240V
277V
347V
120-277V
120-277V
120-277V
120-277V
N/A
N/A
N/A
IL-LED-120AC
IL-LED-240AC
IL-LED-277AC
IL-LED-347AC
IL-LED-DC120
IL-LEDDC1203M
IL-1Dim18
IL-1Dim3
IL-1DimRJ9
IL-1DimRJ14
IL-1Dim
1.7m / 68”
1.7m / 68”
1.7m / 68”
1.7m / 68”
1.8m / 70”
3m / 118”
1.8m / 70”
3m / 118”
2.8m / 114”
2.8m / 114”
2.8m / 114”
NAME VOLTAGE SKU LENGTH DIAGRAM
1
2
3
4

1-877-540-5588
iluminarlighting.com
[email protected]
9
8
11.3A on 20A / 120V
Breaker Load: 56.5%
Do not Exceed 70%
Max Load for Breaker
12.9A on 20A / 208V
Breaker Load: 64.5%
Do not Exceed 70%
Max Load for Breaker
13A on 20A / 240V
Breaker Load: 65%
Do not Exceed 70%
Max Load for Breaker
13A on 20A / 277V
Breaker Load: 65%
Do not Exceed 70%
Max Load for Breaker
13A on 20A / 277V
Breaker Load: 65%
Do not Exceed 70%
Max Load for Breaker
13.16A on 20A /
480V
Breaker Load: 65.8%
Do not Exceed 70%
Breaker Needed
20A
Breaker Needed
20A
Breaker Needed
20A
Breaker Needed
20A
Breaker Needed
20A
Breaker Needed 20A
Hardwired Terminal
Connection
120V Daisy Chain Up to 3 Fixtures
208V Daisy Chain Up to 6 Fixtures
240V Daisy Chain Up to 7 Fixtures
347V Daisy Chain Up to 10 Fixtures
277V Daisy Chain Up to 8 Fixtures
480V Daisy Chain Up to 14 Fixtures
3.78A
3.78A x 3 Fixtures = 11.3A on 20A / 120V = 56.5% Load
2.16A x 6 Fixtures = 12.9A on 20A / 208V = 64.5% Load
1.87A x 7 Fixtures = 13A on 20A / 240V = 65% Load
2.16A
1.87A
2.16A
1.87A
...
...
...
3.78A
1.63A
1.3A
0.94A
1.63A
1.3A
0.94A
...
...
...
70% Max Load for Circuit Breakers, limit is due to Inrush
Current in High End Commercial LED Fixtures
70% Max Load for Circuit Breakers, limit is due to Inrush
Current in High End Commercial LED Fixtures
1.63A x 8 Fixtures = 13A on 20A / 277V = 70% Load
1.3A x 10 Fixtures = 13A on 20A / 347V = 65% Load
0.94A x 14 Fixtures = 13.16A on 20A / 480V = 65.8% Load
! !
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
DAISY CHAIN SPECIFICATION

1-877-540-5588
iluminarlighting.com
[email protected]
11
10
PPFD MAP
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
Clearance
Qty
Average PPFD
Max PPFD
Min PPFD
Median PPFD
Min/Average
Watts
0.5
1
678.06
911
286
775.5
42.18
440
ft
u
μmol/m2/s
μmol/m2/s
μmol/m2/s
μmol/m2/s
%
W
Clearance
Qty
Average PPFD
Max PPFD
Min PPFD
Median PPFD
Min/Average
Watts
1
1
541.39
777
250
564.5
46.18
440
ft
u
μmol/m2/s
μmol/m2/s
μmol/m2/s
μmol/m2/s
%
W
Clearance
Qty
Average PPFD
Max PPFD
Min PPFD
Median PPFD
Min/Average
Watts
Clearance
Qty
Average PPFD
Max PPFD
Min PPFD
Median PPFD
Min/Average
Watts
Clearance
Qty
Average PPFD
Max PPFD
Min PPFD
Median PPFD
Min/Average
Watts
Clearance
Qty
Average PPFD
Max PPFD
Min PPFD
Median PPFD
Min/Average
Watts
1.5
1
433.06
618
277
433.5
52.42
440
3
1
230.08
296
100
240
43.46
440
4
1
161.09
192
124
160
76.98
440
5
1
116.42
133
96
115.5
82.46
440
ft
u
μmol/m2/s
μmol/m2/s
μmol/m2/s
μmol/m2/s
%
W
ft
u
μmol/m2/s
μmol/m2/s
μmol/m2/s
μmol/m2/s
%
W
ft
u
μmol/m2/s
μmol/m2/s
μmol/m2/s
μmol/m2/s
%
W
ft
u
μmol/m2/s
μmol/m2/s
μmol/m2/s
μmol/m2/s
%
W
>=1000 762-1000 581-762 443-581 338-443 258-338 196-258 150-196 <150
Legend
PPFD MAP iL5x at 0.5ft
PPFD MAP iL5x at 1ft
PPFD MAP iL5x at 1.5ft PPFD MAP iL5x at 5ft
PPFD MAP iL5x at 4ft
PPFD MAP iL5x at 3ft

CAUTION
1. Leave at least one inch of space between the fixture and the mounting
area for maximum performance and lifespan.
2. ALWAYS wear protective eye wear when looking directly at the diodes to
prevent eye damage.
3. Only handle, clean or move fixture when it’s unplugged and completely
cool.
4. Keep the fixture free of dust, debris, deposits to ensure the maximum
potential of the fixture.
5. NEVER use cloth to clean the diodes. This will scratch the diodes and could
potentially break or dislodge them.
6. DO NOT use chemicals to clean the fixture. Use ONLY low pressure air or
low pressure water to remove dust and debris.
7. Do not exceed 70% max load for breakers due to Inrush current in LED
fixtures
At ILUMINAR, we stand behind our products and our
technology as well as our customers. All ILUMINAR fixtures
are backed by our 5-Year Guarantee. Please visit our website
iluminarlighting.com/warranty for more information.
1-877-540-5588
iluminarlighting.com
[email protected]
GUARANTEE
Please read the following list carefully prior to beginning installation.