insize ISF-MT1K User manual

MN ISF-MT1K-E-
TESTING STAND
ISF-MT1K
www.insize.com
V0
OPERATION MANUAL

1 2
Introduction
Structure
Load capacity: 1000N.
Travel: 200mm, 3mm vertical movement per revolution.
Dimension: 196x250x446mm.
Weight: 13kg.
Installation
1
2
Usage
Maintenance
The stand can work in two modes: tensile and compression. Rotate
the handwheel to move the force gage. It also can work in two
directions: vertical and horizontal.
1
2
3
bottom back
horizontal test
adjusting screw
This Testing Stand is specially designed for ISF-DF2~1000A series
force gages. It is widely used in various industries and research
institutions for tension and compression test, insertion force, failure
test.
handwheel
anti-dust cover
base
test frame
connector for
force gage
(not included)
accessory
Install the force gage: Use 4 screws to fit the force gage onto the
testing stand.
Install the digital scale(optional): Please refer to the following
pictures and use the accessor es to fit the scale.i
Don't use the stand overloaded the load capacity is 1000N.,
Keep clean of the testing stand.
When the movement of the stand is not smooth please add a
few lubrication oil on the guide rod.If you have problems
please contact us.
,
,