Insportline Gardian G12TF User manual

USER MANUAL –EN
IN 19892 Motorized treadmill inSPORTline Gardian G12TF

2
CONTENTS
SAFETY PRECAUTIONS........................................................................................................................ 3
ATTENTION ............................................................................................................................................ 3
SAFE USE............................................................................................................................................... 3
ASSEMBLY INSTRUCTIONS................................................................................................................. 4
TECHNICAL PARAMETERS ................................................................................................................ 13
OPERATION INSTRUCTIONS ............................................................................................................. 13
CONSOLE............................................................................................................................................. 13
INTERFACE....................................................................................................................................... 13
PROGRAMS...................................................................................................................................... 15
BUTTONS.......................................................................................................................................... 37
ERRORS ............................................................................................................................................... 39
SAFE EXERCISING.............................................................................................................................. 39
GETTING START.................................................................................................................................. 40
WARM –UP EXERCISE ................................................................................................................... 40
MAINTENANCE INSTRUCTIONS ........................................................................................................ 42
MAINTENANCE GUIDELINES.............................................................................................................. 42
BELT MIDDLE PLACEMENT AND TIGHTNESS ADJUSTMENT..................................................... 42
BELT ADJUSTMENT......................................................................................................................... 43
EXPLODED DRAWING......................................................................................................................... 44
PART LIST............................................................................................................................................. 45
STORAGE............................................................................................................................................. 49
IMPORTANT NOTICE........................................................................................................................... 49
ENVIRONMENT PROTECTION ........................................................................................................... 49
ZÁRUČNÍ PODMÍNKY, REKLAMACE .................................................................................................. 49

3
SAFETY PRECAUTIONS
WARNING!
In order to avoid an accident, you have to pay attention to the following instructions:
1. Attach the safety key clip tightly to your clothes before exercising.
2. Swing your arms naturally when you are exercising. Don’t look downwards.
3. Accelerate the speed gradually. Adapt to the current speed before the acceleration.
4. In case of emergency press the emergency stop button or pull out the safety key.
5. Only leave the device when it is completely stopped.
Note: Strictly follow the assembly instructions.
ATTENTION
1. Ask your physician for advice before starting any exercise program.
2. Check if all the bolts fit well. No adjustable part should protrude. It could obstruct the user’s
movements.
3. Don’t place this treadmill in damp environment. Humidity can cause damage. (We take no
responsibility for any damage or injury caused by the above reasons.)
4. Wear sports clothes and sports shoes during exercising.
5. Don’t use this device at least 40 minutes after having a meal.
6. Warm up before exercise to avoid injury.
7. If you suffer from hypertension, consult your doctor before exercising.
8. Keep children away from the device.
9. This treadmill is intended to be used only by adults.
10. Don’t insert anything into parts or holes of this device to avoid damage or injury.
SAFE USE
Connect the power line only after the assembly is complete (the protect cover must be put on). Plug in
the power line into the power socket, which has the 16A safety grounding. We suggest that you use
the over current protector (to ensure the safety of the user and treadmill).
1. Place this treadmill on clear and level ground. Don’t place it on thick carpet so you do not
block the ventilation under the device. Don’t place it near water or moisture and don’t use it
outdoors. The power line is specific. If it is damaged, purchase a new one from the dealer or
contact our company directly. For your safety keep a minimal clearance of 0.6 m around this
treadmill.
2. When you place the treadmill, make sure it doesn’t cover the socket on the wall, which is
convenient to plug in the power line.
3. Never start the treadmill while you are standing on the running belt. After connecting the
power, there may be a pause after the running belt begins to move. You should always stand
on the non-slip side rails until the belt starts moving.
4. Do not wear long or loose clothes when you exercise. they may get caught in the treadmill.
Usually you need to wear running shoes or sports shoes with rubber soles.
5. Never remove the protective cover casually. If you need to open it for maintenance, make sure
to unplug the power line first.
6. Keep children away from the device.

4
7. When you use the treadmill for the first time, hold the handrails until you are familiar with the
device.
8. The treadmill equipment is made for special use. Please do not modify it and don’t make any
improper maintenance. If the treadmill suddenly or continually increases its speed due to an
electronic system problem, pull out the safety switch. The treadmill will stop immediately.
9. Weight limit: 200 kg
10. Category: SB (according to EN957 norm) suitable for professional and/or commercial use.
11. WARNING! The heart rate frequency monitoring may not be completely accurate.
Overexertion during training can lead to a serious injury or even death. If you start to feel faint,
stop the exercise immediately.
ASSEMBLY INSTRUCTIONS
When you open the box, you’ll find the following already-assembled parts.
Installation tools:
3. L/R Post
35. Screw M8 x 15
29. Wrench 5
30. Wrench 6
31. Wrench 8
32. Wrench 10
33. Wrench
34. Wrench 17-22
35. Wrench 34
41. Wrench 4
59. L/R
78. Screw M12 x 25
80. Screw M5 x 25
88. Screw M12 x 65
90. Screw M8 x 45
91. Screw M8 x 20
97. Washer ∮9*∮16*t1.6
99. Washer
∮13*∮24*t2.5
120. Screw BT40 x 15L
152. Frame
153. Console
154. Display
155. Display cover

5
STEP 1
Using a flat-blade screwdriver, press and turn the locking screw. The engine cover opens
automatically.
STEP 2
Attach Right and Left Posts (3) to Frame (152) with Screws M12 x 65 (86), M12 x 25 (78) and Flat
Washer (99).

6
STEP 3
Connect the right-side Lower Signal wire (159) with Middle signal wire (172). Connect the Middle
power wire (158) with the Lower power wire (173).
Connect left TV signal middle wire (169) with the left TV signal lower wire (170).
STEP 4
Close the engine cover. Turn the securing bolts with a flat-blade screwdriver.

7
STEP 5
Connect left right handrail light wire with TV signal wire, power wire, signal wire. Then fix the Console
on the frame. Use M6 wrench. Lock tight the screws M8*20(91). Then use M5 ,lock tight 4 screws
M8*15(20) with washers ∮9*∮16*t1.6(97).
STEP 6
Connect the module connecting wire with video communication wire, then fix the display neck
decorative cover to the console. Use wrench M6 to fasten the screw M8*45(90).

8
STEP 7
Connect the cables and then attach the display with M8 x 20 screws (91) and M6 wrench.

9
STEP 8 –CABLE CONNECTION
1. Prepare cables (169, 146) from left post (3L)
2. Prepare the cables (172, 158,146) from the right post (3R)

10
STEP 9
Then connect the cables on the left (156, 168) and on the right (156, 157, 171) from the console with
the cables from right and left post (3L / R)
STEP 10
Attach the console with M8 x 20 screws using an Allen key M6.

11
STEP 11
Use M5 wrench to attach 4 M8 x 15 screws and 4 washers ∮9 * M16 * t1.
STEP 12
Attach the display holder with M8 x 45 screws and M6 key.
STEP 13
Connect the wires from the control panel to the display. Then attach the display with M8 x 45 screws
and M6 wrench.
STEP 14
Connect the cables.

12
STEP 15
Connect power and signal cables.
STEP 16
Fasten all the screws on the posts, then use Screw M5x25 (80) to fasten Front cover (59/R), then use
screw M4 x 15 (120) to fasten the front cover to the frame from inside.
STEP 17
If the treadmill is not stable, use the wrench to rotate the support feet.

13
TECHNICAL PARAMETERS
Assembly size (mm)
2280*945*1620 mm
Speed range
1 —23 Km/h
Incline range
1 - 20%
Motor spec. (HP)
8 HP (PEAK)
Running size (mm)
1650*600 mm
Input Volt (V)
220 –240 V
N.W.
273 Kgs
Max. output power
3000 W
Max. user weight
200 Kgs
Operating
temperature
0 –28 ℃
IPS screen play
Speed, Time, Distance, Calories, Pulse
Safety Protection and
Product Advantage
A. Red safety switches on the panel (function based on
magnetic plate).
B. Overcurrent and overload function set in the microcomputer.
C. LED screen and control panel display clearly; the angle of
the view has no effect.
D. 1.0—23 km/h speed range.
E. Frequency control method, speed adjusting is very smooth
and convenient.
F. The buffer system makes the exercise natural and smooth
at the same time and cushions the impact to the user’s foot,
ankle joint and other parts of their body.
G. The over current protector can only continue to function
when reset manually, which can prevent motor damage.
H. Intelligent explosion-proof circuit reacts in 0,3 seconds,
providing maximum protection.
OPERATION INSTRUCTIONS
CONSOLE
The console uses the Android operating system. Because of the use of the Android operating system,
the start of the console is slower. We recommend that you periodically clean your console's temporary
memory.
INTERFACE
Console consists of 18 interface menus: 1. Main menu, 2. Time mode, 3. Distance mode, 4. Calorie
mode, 5. (Heart rate control, 6. Mode interface, 7. Scene selection, 8. Exercise guideline, 9. About
treadmill, 10. Fat test, 11. Bluetooth connection, 12. Manual operation, 13. Internet interface, 14.
Media library, 15. Video input, 16. Local application, 17. Program mode, 18. System setting
2-16 Depends on choices in Main menu
17 –Entrance through Console keyboard
You can slide to right or left to see more functions.

14
Volume adjustment
Settings menu
You can choose the interface language in the upper right corner: English, Chinese, Italian, Korean,
French, German, Spanish, Russian, Arabic
The WIFI and Bluetooth indicators are informational only

15
PROGRAMS
TIME MODE
Press TIME MODE to enter interface.
Here you can set the length of your workout. The default value is 30 min, you can set a time from 1 to
99 min. Then press CONFIRM to start the countdown and the program will start. To return to the Main
Menu, press RETURN.
If the program reaches 0 min, it stops. You can turn off the program earlier with PAUSE and STOP.
In the interface, you can set the speed, incline, pause, stop.
With MUSIC, you can select music from your library. (a memory card or other music source must be
connected)
With VIDEO, the user can play videos. (a memory card or other music source must be connected))
With SCENE you can select a scene.
Press to return to the main menu.

16
DISTANCE MODE
Press DISTANCE MODE to enter interface.
Here you can set the distance of your workout. The default value is 5 km, you can set a distance from
1 to 10 km. Then press CONFIRM to start the countdown and the program will start. To return to the
Main Menu, press RETURN.
If the program reaches 0 km, it stops. You can turn off the program earlier with PAUSE and STOP.
In the interface, you can set the speed, incline, pause, stop.
With MUSIC, you can select music from your library. (a memory card or other music source must be
connected)
With VIDEO, the user can play videos. (a memory card or other music source must be connected))
With SCENE you can select a scene.
Press to return to the main menu.

17
CALORIE MODE
Press CALORIE MODE to enter interface.
Here you can set the goal for burned calories. The default value is 50 calories, you can set the burned
calories from 1 to 9999 calories. Then press CONFIRM to start the countdown and the program will
start. To return to the Main Menu, press RETURN.
If the program reaches 0 calories, it stops. You can turn off the program earlier with PAUSE and
STOP.
In the interface, you can set the speed, incline, pause, stop.
With MUSIC, you can select music from your library. (a memory card or other music source must be
connected)
With VIDEO, the user can play videos. (a memory card or other music source must be connected))
With SCENE you can select a scene.
Press to return to the main menu.

18
HEART RATE CONTROL
Press HEARTH RATE CONTROL to enter interface. The program interface consists of 3 different
pages. You can see the current page at the bottom of the display.
The left page tests the user's pulse. (grab pulse handlebar plates for test)
The middle page sets user information. Gender MALE / FEMALE, AGE and required pulse target.

19
Right page compares data.
Then press CONFIRM on the middle page to start the countdown and the program will start. To return
to the Main Menu, press RETURN.
Pressing CONFIRM will display the following:
When the pulse reaches the desired value, a warning is displayed, and program stops. You can turn
off the program earlier with PAUSE and STOP.
WARNING: The displayed values in the program are for reference only and do not serve
medical purposes!

20
SCENE SELECTION
Press SCENE SELECTION to enter settings.
You can choose following:
RACETRACK MODE –displays racetrack
MAP MODE –User can set start and end destination. The system automatically sets the route
according to the user's speed. (The belt does not use the GPS system. It uses Baidu maps for
simulation. Some routes may not be available.)