Insportline 9126 T60i User manual

1
USER MANUAL –EN
IN 9126 Motorized Treadmill inSPORTline T60i

2
CONTENTS
SAFETY INSTRUCTIONS.................................................................................................................................... 3
PACKING DETAILS ............................................................................................................................................. 4
EXPLODED VIEW ................................................................................................................................................ 5
LIST OF COMPONENTS...................................................................................................................................... 5
TREADMILL STRUCTURE ................................................................................................................................. 6
ASSEMBLY INSTRUCTIONS.............................................................................................................................. 7
USAGE ................................................................................................................................................................... 8
POWER SWITCH .............................................................................................................................................. 8
SAFETY KEY .................................................................................................................................................... 8
FOLDING & UNFOLDING............................................................................................................................... 9
INSTRUCTION FOR CONSOLE........................................................................................................................ 10
DETAILED INSTRUCTIONS ......................................................................................................................... 13
MAINTENANCE ................................................................................................................................................. 14
RUNNING BELT ADJUSTMENTS................................................................................................................ 14
CLEANING ...................................................................................................................................................... 16
CAUTIONS, DEPOSITING............................................................................................................................. 16
GUIDES FOR MALFUNCTION ......................................................................................................................... 16
INSTRUCTION MANUAL FOR IRUNNING+.................................................................................................. 18
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ....................................................... 23

3
Special tips:
Before installation and operation, please read this operation manual carefully and save this manual for future
reference.
SAFETY INSTRUCTIONS
We have considered more for safety when we design and produce this item. However, in case of any
unhappiness, please pay attention to these tips. We don’t assume responsibility if any accident cased by follow
tips.
According to your health condition, please exercise properly. Overload or improper exercise will
damage your health.
While running, you should dress properly. Don’t dress too loosely in case your clothes are entangled by
the machine. And please wear sport shoes. Don’t let your children or pet play near it to avoid
unnecessary injury.
This machine is not suitable for children. For patients or the disabled to use, they have to follow the
guides by their guardians or doctors.
Don’t use this machine when in outdoor, high humidity condition or sun.
Please pull the plug off from socket and keep the safe key, when the treadmill is unused.
This machine is for home use, not suitable for professional exercise or testing, and also not suitable for
medical purpose.
The heart rate on this machine is not suitable for medical.
If any damage for power wire, please ask manufacturer or professional service to replace it in case of
any danger.
Please check all the parts before using. Make sure that all the nuts or screws are fastened.
Place your treadmill on the clean, flat and solid floor. Make sure that there is not anything pointy, water
or hot near to the machine.
Please stop exercising immediately and consult your doctor if you’re feel giddy, surfeit, thorax ache or
other symptoms.
Make sure that hands are not near to running parts. Don’t put your hands or foots under the running belt.
When running this machine, it is only for one person to use it!
Please use the spare parts from us, it is not acceptable if you use spare parts from others.
This machine is HC level, max weight shall be less than 120 kg.
Please consult your doctor at first before running, if you have one of the following diseases.
1. Cardiopathy, hypertension, sugar diabetes, respiratory disease, smoking, and other chronic
diseases, complication disease.
2. If you are over 35 years old and heavier than common weight.
3. Women in pregnant or in breasting period.
SPECIAL TIPS FOR SAFETY
Please use qualified socket. If the plug and the socket is not compatible, please ask electrician to handle
it and don’t do anything for the plug.
The voltage for this machine is 220V-240V AC.
Don’t let power wire touch roller, and also don’t put power wire on the running belt. Don’t use
damaged plug.

4
Before cleaning, moving and maintaining the machine, please pull off the plug for the socket.
Warning: If don’t pull off, it will cause injury or damage for the machine.
PACKING DETAILS
Warning: Carefully install the product, avoid to make any damage.
Notice:
1) Carefully read the instructions before installation. Operate in accordance with procedures.
2) Check components in the package.
3) Remove all paper boxes and foams used as fasteners.
4) Check all the following components. If there is missing or problematic parts, please contact the dealer.
Frame
Meter
Decorating cover
at base
Decorating cover for
meter
Hardware tool bag
Hardware tool bag
Multi-wrench 1 pcs
Homemade wrench 1 pcs
Nut 4pcs
Umbrella-type allen screw
M8*20 6pcs
Umbrella-type allen screw
M8*60*15 2pcs
Umbrella-type cross tapping screw
M4.2*15 4pcs
Washer 8pcs
Lubricant
Safety key
MP3 connector 1pcs
Umbrella-type allen screw M4*20
4pcs

5
EXPLODED VIEW
These are all the components used in installation. All components are listed in the following form.
LIST OF COMPONENTS
No.
Component
Quantity
No.
Component
Quantity
1
Base frame
1
28
Long bumper
4
2
Frame
1
29
Locating pad for decorative bead
8
3
Left pillar accessory
1
30
Rubber wheel
2
4
Right pillar accessory
1
31
Upper cover of meter
1
5
Dashboard frame
1
32
Meter panel
1
6
Incline frame
1
33
Right decorative cover for upright
1
7
Pressure rod
1
34
Left decorative cover for upright
1
8
Motor stator
1
35
Lower cover of meter
1
9
Front roller
1
36
Surface paster
1

6
10
Back roller
1
37
Safety key
1
11
Motor
1
38
Sponge sheath
2
12
PCB
1
39
Heart rate sensor
2
13
Incline motor
1
40
Upper control board
1
14
Running belt
1
41
Loudspeaker
2
15
Running board
1
42
Photoelectric line
1
16
Multislot belt
1
43
Upper line of communication
1
17
Upper cover of motor
1
44
Lower line of communication
1
18
Decorative bead
2
45
Red connecting line
1
19
Left running belt adjustor
1
46
Red connecting line
1
20
Right running belt adjustor
1
47
Green connecting line
1
21
Safety brace for base frame and frame
1
48
Power connector
1
22
Regulation mat
2
49
Reed pipe for safety key
1
23
Left decorative cover at base
1
50
MP3 module
1
24
Right decorative cover at base
1
51
Power switch
1
25
Base handling wheel set
2
52
Overload protector
1
26
Lower cover of motor
1
27
Bumper
4
TREADMILL STRUCTURE

7
ASSEMBLY INSTRUCTIONS
Step 1: Set meter tube on the base frame
a) Make the communication line through the right meter tube.
b) Set meter tube on the base frame. Use 2 pcs of Screw M8*20 with 2 pcs of washer and 2pcs of Screw
M8*60 with 2 pcs of washer, 2 pcs of nut to solid the meter tube. (Don’t fasten screw at first )
Step 2: Put meter on the meter tube
a) Put decorating cover for meter on meter tube.
b) Make sure that communication lines are connected correctly, in case they are connected in reverse.
c) Put meter on the meter tube. Use 4 pcs of Screw M8*20 with 4 pcs of washer, 2 pcs of nut to solid the
meter. (Don’t fasten screw at first)
d) After the machine is power on, push “Start”. If everything goes well, then fasten screws mentioned in
front steps.
e) Use 4 pcs of Screw ST4.2*15 to solid decorating cover for meter.
Step 3: Install decorating cover at base

8
Use 4 pcs of Screw M4*20 to solid left and right decorating cover at base.
Step4: Disassemble connecting screw for base frame
USAGE
POWER SWITCH
Insert the power plug into the socket and switch on the machine. The switch light will be on and you will hear a
voice “Di”. You will find the meter light will also be on.
SAFETY KEY
The machine can work only when you put safety key at the appointed position. Make sure the other end of the
safety key has been nipped to your clothes. In this way, you can pull the safe key for the machine’s sudden stop
under the dangerous condition. Then you will not be injured. If you need to reuse the machine, you could put
safety key back.

9
FOLDING & UNFOLDING
Folding:
Folding will help to save space.
Before folding, please switch off and pull off the plug.
Use your hand to lift the running board until it has been locked.
Unfolding:
Step on the supporting tube and pull running board with your hands. The running board will fall to the ground
slowly.

10
INSTRUCTION FOR CONSOLE
TECH INFO
Time
00:00-99:59 Min
Speed
1.0-20.0 km/h
Incline
0-20%
Distance
0.00-99.9 km
Calorie
0-999 KCAL
Heart rate
50-200 / Min
Program
Preset Program
P1-P99
Body Fat Test
FAT
Sexuality
01/02 (men/women)

11
PANEL KEYS
START Key:
Press "Start" key, there will be 3 seconds countdown
displayed on the window! After countdown, the
machine will run at the speed of 1.0km/h.
STOP Key:
Under running condition, press “Stop” key, it will slow
down then stop.
Reset:
Press "Stop" key twice continuously, the machine will
be reseted and start for new exercise record when you
press "Start".
PROG. Key:
Under ready condition, press "PROG.", you could select
program P1-P99 and FAT.
P1-P99 is built-in program, FAT is body fat test.
When you finished selecting, you have to press “Start”
to start it!
MODE Key:
Under ready condition, Press "MODE.", you could
select 30:00, 1.0 or 50.
30:00 is time countdown, 1.0 is distance countdown, 50
is calorie countdown.
When you have selected, you have to press “Start”to
start it!
SPEED + - Key:
Under ready condition, it is used for setting some data.
Under running condition, it is used for setting speed,
speed difference is 0.1 km/h for each time. When we
press it for above 0.5 seconds, it will progressive
increase or reduce automatically.
INCLINE△▽Key:
Under ready condition, it is used for setting some data.
Under running condition, it is used for setting incline,
incline difference is 1% for each press. When we press
it for above 0.5 seconds, it will progressive increase or
reduce automatically.

12
SPEED Direct Key:
Use these keys, you could set speed for 5km/h, 10km/h,
15km/h directly.
INCLINE Direct Key:
Use these keys, you could set incline for 5%, 10%, 15%
directly.
DISPLAYED WINDOW
A
Display running distance
B
Display program picture
C
Display running time
D
Display running speed
E
Display calorie
F
Display heart rate
G
Display runway
H
Display specific incline

13
DETAILED INSTRUCTIONS
Quick start (for manual mode)
Turn on power switch, put safe key in the right position.
Press “START” key, there will be 3 seconds countdown displayed on the window! After countdown,
the machine will run at the speed of 1.0km/h.
According to your needs, you could use “SPEED+”, “SPEED-” to change speed, use “INCLINE△”,
“INCLINE▽” to change incline.
When you put your hands on the handlebar’s heart pulse for 5-8 seconds, it will display heart rate on the
screen.
Manual mode
Under ready condition, press "Start" key, the machine will run at the speed of 1.0km/h and incline 0%.
The other window will forward count from 0. Press “INCLINE direct key, “SPEED direct key”,
“INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-”, you could change speed and incline.
Under ready condition, press “MODE” to come into time countdown mode. Window “Time” displays
“30:00” and shining, you could press “INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-” to set
exercise time from 5:00-99:00.
When on distance countdown mode, press “MODE” to enter. Window “DIST” displays “1.0” and
shining, you could press “INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-” to set exercise distance
from 0.5-99.9.
When on calorie countdown mode, press “MODE” to enter. Window “CAL” displays “50” and shining,
you could press “INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-” to set calorie from 10-999.
After finish setting time, distance or calorie mode, you could press “Start”to start the machine. There
will be 3 seconds countdown displayed on the window! After countdown, the machine will run at the
speed of 1.0km/h. You could press “INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-” to adjust
speed and incline. Press “Stop”, the machine will stop slowly.
Built-in Program
There are 99 built-in programs P1-P99. Under ready condition, press “PROG.” Key continuously, Window
“PROGRAM” will display “P1-P99”, FAT in turn. P1-P99 are built-in programs. After selecting specific
program, press “MODE”, Window “Time” displays “30:00” and shining, you could press “INCLINE△”,
“INCLINE▽”, “SPEED+”, “SPEED-” to set exercise time from 5:00-99:00. After setting, press “Start” to start
the machine. Built-in programs have 16 parts, the time for each part=setting time / 16. When machines come into
next part, there will be a voice “Bi-Bi- Bi” to remind you, and speed and incline will be changed according to the
built-in programs. No matter whether you have pressed “INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-” to
change speed and incline in front parts. After finishing one program, there will be voice “Bi-Bi- Bi”, the machine
stop slowly and “End” will be displayed on the window. 5 seconds later, the machine will come into ready
condition.
Data range:
Parameter
Setting range
Displayed range
Time (minute:second)
5:00-99:00
0:00-99:59
Incline (%)
0-20
0-20
Speed (KM/H）
1.0-20
1.0-20
Distance (KM)
0.5-99.9
0.00-99.9
Heart rate (time/minute)
N/A
60-185
Calorie (cal)
10-999
0-999

14
Body fat test
Under ready condition, press “PROG.” key continuously to come into FAT. Press “MODE” key, you could find
F-1, F-2, F-3, F-4, F-5 (F-1-- SEG , F- 2-- AGE , F-3-- HEIGHT, F-4-- WEIGHT, F-5-- FAT displayed on the
window. Press “INCLINE△”, “INCLINE▽”, “SPEED+”, “SPEED-” to set. After setting, press “MODE ” to
come into “FAT”. At this time, put your hand on the heart pulse for 5-8 seconds, there will be body fat date
displayed on the window. You could find whether your weight and height matches. (This data only for reference,
can’t be used for medical data)
F-1
Sex
01 Men
02 Women
F-2
Age
10------99
F-3
Height
100----200
F-4
Weight
20-----150
F-5
FAT
≤19
Underweight
FAT
=(20---25)
Normal weight
FAT
=(25---29)
Overweight
FAT
≥30
Obesity
Power save mode
Our machine has power save function. When you turn on power switch for 10 minutes and don’t press any key,
the machine will come into power save mode and there is no light on the screen. You could press any key into
ready condition.
MAINTENANCE
RUNNING BELT ADJUSTMENTS
Identification ways for the degree of tightness of running belt and poly V-belt.
When the running belt skips, please follow the steps as follows to make sure which belt needs to be adjusted,
running belt or poly V-belt.
a) Unplug all power supply, screw and remove the base cover.
b) Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the
running belt stop. If running belt stops, together with the front roll, but the motor still runs, under this
condition, it means the poly V-belt needs to be adjusted.
c) Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the
running belt stop. If running belt stops, but front roll still runs, under this condition, it means the
running belt needs to be adjusted.
The adjustment steps for poly V-belt
a) Unplug all power supply and take off the base cover.
b) Loosen the four screws for the motor, adjust the V-belt tension bolts in clockwise direction, and then
tighten back the four screws for the motor.
The adjustment steps for running belt
a) Turn the speed to be 6km/h. for running

15
b) Turn the both tension screws located at the end of the treadmill on the right and left sides, half a turn
clockwise using the Allen key. (Diagram1 and Diagram 2)
c) After adjustment, running belt still slips; please repeat the steps as above.
Tighten the running belt (Diagram 1)
Loosen the running belt (Diagram 2)
The adjustment steps for running belt deflection
The running belt will be deflected more or less under using. Then it needs to be adjusted. The steps are as
follows:
a) Place the treadmill on a horizontal floor, turn the speed to be 6 km/h for running.
b) If the running belt is deflected to the right, adjust the bolt on the right by turning it for half a turn
clockwise, then adjust the bolt on the left by turning it half an anti-clockwise. (See Diagram 3)
c) If the running belt is deflected to the left, adjust the bolt on the left by turning it for half a turn
clockwise, then adjust the bolt on the right by turning it half a turn anti-clockwise. (See Diagram 4)
d) After the adjustment, the running belt still keeps deflecting, please repeat the steps above.
The adjustment for right deflection (Diagram 3)
The adjustment for left deflection (Diagram 4)
Running board lubrication- Silicone oil has been provided (White Bottle)
The treadmill is brand-new and has been pre-factory lubricated. Lubrication is not necessary directly after
purchase.
Lubrication needs constant maintenance termly after purchase. The friction between the running board and
running belt has a great effect on the treadmills’ life. So please lubricate your machine termly (every one month).
The steps are as follows:
Step 1. Please unplug power supply for the treadmill and loosen the belt (belt tension screws located at the end
of the treadmill).
Step 2. After loosening the screws, lift up the running belt and clean in-between the running board. Squeeze the
small white bottle of SILICONE oil which was supplied with your purchase and wipe it evenly across the board.
Step 3. After lubricating the board, screw the belt tension back to its correct tension. Tighten evenly on both
sides. When it is almost tensioned, run the treadmill at 1km without any load. Adjust both tension screws to
make the belt in the centre of the back roller. Run the treadmill at 5km for 3mins.
Step 4. Stop the treadmill and start to walk on it at 5km/h. Lastly fine tension both screws until it’s running
smoothly with your weight on.

16
CLEANING
a) Please power off and pull the plug out before cleaning.
b) Wipe out the dust stuck on the surface and running board frequently.
c) Please clean the surface of frame and running belt with a soft cloth dipped with suds, don’t use things
like eradicator and naphtha. (After cleaning, please dry it for use)
d) Please take the protecting cover off every two month, use vacuum dust-collector to suck the dust
remaining inside of the protecting cover. (The dust will make the components of circuitry board short
circuit)
CAUTIONS, DEPOSITING
Cautions
Please make sure that the plug has been pulled out before cleaning or maintenance.
Depositing
The treadmill should be deposited indoor in case of being damp. Water can’t be spattered and nothing can be laid
and inserted on the treadmill.
Please keep the air a little humid in winter. And please void the big static electricity, it may disturb the operation
of meters or even damage them.
GUIDES FOR MALFUNCTION
Analyzing and eliminating malfunction
Item.
Malfunction
Reasons
Solution
1
Treadmill can’t be
started
The safe key isn’t in the right
position
Put the safe key in the right
position.
The electrical switch is placed to “0”
Turn the electrical switch to “1”.
2
Meter can’t display
The meter and upper communication
line are not connected well
Disassembly meter and check the
upper communication line, make
sure that meter and communication
line are connected well.
The upper communication is broken
Replace it!
3
Heart rate can’t be
displayed
The pole of heart rate sensor is not
wet enough
Wet the pole with water or liquor
for hard contact lenses.
Disturbed by electromagnetism
Stay away from electromagnetism.
4
Incline doesn’t work
The motor wire is not well connected
Open the motor cover and
reconnect it.
5
Running belt runs
faster or slower than
what has been
displayed
Unadjusted
Readjust it.
6
Running belt slips
Running belt is not tight enough
Please read point “Maintenance:
The adjustment steps for poly V-
belt/running belt”for reference.
7
Running belt is
deflected
The running belt is unadjusted
Please read point “Maintenance:
The adjustment steps for running

17
belt deflection” for reference.
8
Displayed E0 on the
screen
Safety key problem
Check the safety key or Reed pipe
for safety key.
9
Displayed E01 on the
screen
No sensor signal
Check sensor wire, whether it is
been connected well or whether it is
broken.
10
Displayed E02 on the
screen
The PCB problem
Change the PCB.
11
Displayed E03 on the
screen
The speed problem
If find it when speed is exceed
8km/h, it is overweight or the
broken of running board, running
belt. Check the running board and
running belt. If it is the problem of
running belt, try to add some oil for
the running belt at first.
If speed is not exceed 8km/h,
change motor or PCB to check.
12
Displayed E04 on the
screen
Communication lines problem
Check the connect of upper
communication line with console
board and lower communication
line with PCB, the connect of upper
communication line and lower
communication line. If they are
connected well, change the
communication lines.
13
Displayed E05 on the
screen
Over current protection
Check whether it is overloading
Check whether the drive motor can
run normally. If not, replace motor.
Check PCB, if it is broken, replace
PCB.
Check power voltage, use normal
power voltage.
14
Displayed E06 on the
screen
The motor problem
Check those in turn: whether the
motor wires are connected; change
motor; change PCB.
15
Displayed E08 on the
screen
Overload protector
If it is not overload, then add oil for
running board, change the running
belt or running board, change the
PCB in turn to check!
16
Displayed E09 on the
screen
Overhot protector
Stop the machine and make it to be
cold. If it happens when in normal
temperature, then replace PCB.
17
Displayed E10 on the
screen
Overvoltage protector
Check the voltage, whether it is
normal!
18
Displayed E12 on the
screen
Incline alarm
Check the VR wire, AC wire,
connecting wire of incline motor,
incline motor and PCB, whether
they are connected well or broken.
After checking, restart the PCB.

18
If you still can’t solve the problems after taking the solutions above, we hope that you can contact our dealer or
company as soon as possible.
INSTRUCTION MANUAL FOR IRUNNING+
1. Download iRunning to tablet
APP name: [iRunning+] on Google play/iTune Store
2. Connect the console to tablet
2.1 iOS system:
Enable Bluetooth function and search device [iRunningXXX] (Note: Please find the device no. from the
console). Then perform [Bluetooth pairing device], preset pairing password 0000 (4 zeros).
After pairing, go to desktop and click to enter APP.
2.2 Android system:
Enter iRunning → Click to scan device → select device [iRunningXXX]
(Note: Please find the device no. from the console). Then perform [Bluetooth pairing device], preset
pairing password 0000 (4 zeros).
3. Programs introduction
3.1 Quick Start
Start
Stop
Workout information
Start exercise directly. During exercise, user can adjust Speed\Incline by pressing console buttons
(Speed/Incline adjustment as following). After exercise, user can share workout information via
Facebook or Twitter or else go back to Homepage.
3.1.1 Incline adjustment drawing:

19
User may adjust the treadmill incline by pressing UP/DOWN key or hot keys.
Adjust range: 0~15
3.1.2 Speed adjustment drawing:
User may adjust training speed by pressing UP/DOWN key or hot keys.
Adjust range: 1~18
Warning: During any exercise, if turn on the safety switch, treadmill will pause immediately and show
the Warning page; If turn off the safety switch, system will stop current exercise and go to work-out
summary page.
Warning page:
3.2 Program
Program selection
Time setting
User can select from P1 to P20 for training. After selection, set training time and press to
start. During exercise, user can adjust Speed\Incline by p pressing console buttons. After exercise, user
can share workout information via Facebook or Twitter or else go back to Homepage.
3.3 Manual

20
Setting page:
User can set target Time/Distance/Calories by manual. After setting, press to start. During
exercise, user can adjust Speed\Incline by pressing console buttons. After exercise, user can share
workout information with Facebook or Twitter or else go back to Homepage.
3.4 User Program
Setting page
Program cluster
Time setting
User can design his/her own training graph by adjusting Speed/Incline value and then name the program
for future reference. From the program cluster, user may add or delete program. When entering
program, set time and press start. During exercise, user can an adjust Speed\Incline by pressing console
buttons. After exercise, user can share workout information with Facebook or Twitter or else go back to
Homepage.
3.5 HRC
HR selecting
Custom HR Setting
Exercise page
In this mode, user can choose: 55%, 65%, 75%, custom for different heart rate training. For example,
user chooses 55%, system will self-calculate Heart Rate: (220-Age)*55%=103.4 BPM. After selection,
double click the icon to enter to enter the program. Then set time and press to start. By
pressing Custom, user can set target HR. System max.BPM is 230.When Time counts down to 0 from
set value, console will stop and treadmill stop as well, then comes to workout page.